Vespa Engine and Parts
Engine and parts: The heart and driving force of the Vespa, the Engine and parts section is located at the rear of the vehicle, firmly anchored to the frame by two pins:
the first, at the end of the central tunnel and the second to the shock absorber.
Given its importance, the engine is composed of numerous and different parts. In a complete overhaul, it is good to check the wear of all the spare parts, paying particular attention to the crosspiece,

















Dust cover plate fixing screw kit (3PCS) for Vespa 125/150/200 VNB-GT-GTR-TS-PX
Vespa 125/150/200 VNB-GT-GTR-TS-PX

Jasil crankshaft advanced version for Vespa 50 N/L/R-50 Special-50 PK 1st series
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK (1st series)
Roller cage included, stroke 43, small cone

Reinforced Parmakit Cross (H.50 mm) for Vespa 50/90/125 Primavera ET3
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Rounded corner, height--> 50.2 mm

Vespa 125 V30>33T
Vespa 125 U VU1T (Utility)
Material: 40 NI Cr Mo 15 (Sim. Piaggio)

Vespa PK50-125/S/XL/XL2

Flywheel fastening nut with swivel washer M12x1.25mm wrench 19 for Vespa 50/80/125/150/200 PX-PE-PK
Vespa PX 125/150/200

Bearing and oil seal kit for crankshaft -BGM ORIGINAL- Piaggio 125-180cc 2-stroke
Piaggio 125-180cc 2-stroke

Complete 5-speed gearbox FABBRI Racing z 11-56, 15-53, 18-50, 20-47, 21-46 for Vespa 50, 90, 125 ET3 Primavera, PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Complete gearbox for track use, ensures optimal gear shifting,
can only be mounted on Quattrini or Fabbri racing engine cases with respective
modifications on the Quattrini engine case, according to our instructions.

Vespa 125 Super VNC1T
Vespa 150 Super VBC1T


Matte black aluminum tubeless VMC rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measure--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
Without Nuts

Gear selector repair kit for Vespa 125/150/180/200 PX-Sprint-GT-GTR-TS
Vespa 80/100/125/150/200

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Internal diameter: 20.5 mm
Gear with 10 engagements

Clutch gear 8/12 springs BGM Z 23 dd for elastic gear 63 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally

Primary transmission gear pinion z16 on clutch bell z69 for Vespa 50 Special
Vespa 50 Special V5B3T
Main feature: Extends the gear ratio without the need to disassemble the clutch bell, increasing speed by 10 km/h

Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK /S/ XL
Hole 34mm

Original TAMENI crankshaft for Vespa 160 GS 2° VSBM 0036098-
Vespa 160 GS 2° VSBM 0036098->/180 SS
Direct injection
stroke: 60.0mm
connecting rod: 110.0mm
piston pin Ø 16mm

Vespa 125 Primavera ET3 VMB1T
Vespa 125/150/200 PX/PE
Vespa 200 Rally VSE1T 0033997>
Ape 50
For installations without contact points
Economy Version/Economy Type

External high voltage coil DUCATI for Vespa 125 PV ET3/PK50-125/N/HP/XL2/Automatic/200 Rally 2°/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Primavera ET3 VMB1T
Vespa 125/150/200 PX/PE
Vespa 200 Rally VSE1T 0033997>
Ape 50
Vespa 50/125 PK FL/HP/N
For installations without needles

External high voltage coil for Vespa PK50/S/XL/Rush-Bravo/SI /Ciao
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush V5X4T
Vespa 50 PK N V5X5T
Ape 50 TM
For needleless systems
MADE IN ITALY

External high tension Piaggio coil for Vespa PK50/S/XL/Rush-Bravo/SI/Ciao
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush V5X4T
Vespa 50 PK N V5X5T
Ape 50 TM
For systems without needles
MADE IN ITALY

Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Measures--> 31x17.5x1.4 mm

Shim washer between bushing and clutch gear + 2.0mm for Vespa 125/150 VNB-VBB-Sprint-GT-GTR
Vespa 125/150 VNB-VBB-Sprint-GT-GTR
The +2.00mm shim is needed to mount DRT clutch gears for PX on 125/150 VNB-VBB-Sprint-GT-GTR models

DRT Z 23 helical gear clutch group (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS-VBB-GL-Sprint-PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm

Complete SURFLEX clutch for Vespa 180 Rally/200 Rally-Cosa/PE/PX
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX 200 VSX1T
Kit composed of:
3 cork discs, 3 steel discs, 7 springs

Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
Kit composed of:
- 2 Michelin S83 Tires 3.00/10
- 2 RMS Rims 3.00/10
- 2 Inner Tubes 3.00/10

Vespa 125/150 PX
Vespa 125/150 Super
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Chromed, with Aluminum silencer

Vespa 125 PX VNX1>2T (Adaptable-Adaptable)
Vespa 150 PX VLX1T
Transfers: 3
Diameter: 57.6 mm

Exhaust manifold gasket for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm for GILERA/PIAGGIO 125-300cc 4-stroke LC
Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm for GILERA/PIAGGIO 125-300cc 4-stroke LC
Ø 38.5x32x30.5 m
Orig.Ref: 846097, 8263885, 826388

Gray kickstart lever protection for Vespa 125 VNB3-6T-TS/150 VBA-Super/160 GS/180 SS/Rally
Vespa 125 VNB3T > 6T
Vespa 125 PX VNX1>2T
Vespa 125 TS VNL3T
Vespa 125 GT VNL1>2T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE

Mazzuchelli advanced crankshaft cone 20 stroke 51 for Vespa 125 PK S/XL
Vespa 125 PK S/XL
Stroke 51 mm, polished connecting rod, 20 mm taper

All models / Tutti i modelli
High-performance gearbox lubricant specifically designed for the Vespa world, its formula protects the gears from wear by reducing drag due to viscosity, while ensuring precise and silent gear changes. Also tested on all types of clutches with excellent results.
Package of 0.250 L

Vespa 180 Rally VSD1T
Weight: 1.6 Kg
Notes: Ignition at 6-12Volt, variable timing. Perfectly interchangeable with the original WITHOUT modifying anything, Nylon fan with aesthetics identical to the original.

Vespa 50 S V5SA1T
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2T
Vespa 50 Elestart V5A3T
Vespa 50 Special V5B1T
Vespa 50 Elestart V5B2T
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T

Tubeless tire MITAS - Touring force 50J 90/90/10 for Vespa 50/90/125 N-L-R-Special-Primavera-ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
Load Index: 50J
Notes: Tubeless

DR thermal group (D49-80cc) 4T for Vespa 50 LX-ET4-S-Liberty-scarabeo-Malaguti Cento
Vespa 50 LX-ET4-S
Piaggio 50 Liberty-Scarabeo
Malaguti Cento

Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2T
Vespa 50 Elestart V5A3T
Vespa 50 Special V5B3T
Vespa 90 V9A1T
Vespa 90 SS V9SS1T
Vespa 90 Racer V9SS2T
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK S XL N HP
Made with shatterproof Delrin discs (compliant with racing regulations), they ensure good protection in case of accidental falls, safeguarding the engine and frame.

Engine Block Fusion Buffer (Rear Shock Absorber Mount) for Vespa 160/180 GS-SS
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Attention--> Assembly with the use of a press and conical tool for introducing the spare part is provided until stock runs out.

Circle wheel Fa Italy 2.75X9 for Vespa 50 R 752189->/Special/V5A2T/V5A3T
Vespa 50 R V5A1T 752189>
Vespa 50 Special V5A2T>3T
Aluminum
M8 nuts and grover washers

SIP tubeless polished aluminum rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measurement--> 2.10-10" with pre-installed valve
Version MY
The engine and parts category is truly vast on our site.
You will find THOUSANDS of spare parts to fix your engine.. if you don't have tools to work with, you can find them in our workshop equipment
section. If you are looking for a complete kit, you can find it in this product..
No, we were just kidding! But this is great for on-the-road repairs.
This is the moment: gaskets, oil seals, bearings, points, capacitors, and the more you have... the better!