material:aluminum
spring color:black
shock absorber length 1: 200 mm
front shock absorber incl. spring: yes
adjustable: adjustable compression, adjustable spring preload
length adjustable: no
system: gas

Gas oleo-pneumatic, compression and extension can be adjusted separately through 12 millimetric adjustments. The spring preload is precisely adjustable, body made of very durable light alloy, spring and tank anodized in dark gray color.
Height--> 330 mm

With the Sport and Competition line, BGM Pro offers two series of high-quality shock absorbers in its product range. Both share perfect workmanship, high-quality materials, and ABE approval. The shock absorbers are very lightweight despite their high load capacity because they are made of high-strength CNC aluminum and have an exceptional hard anodized surface protection. The front shock absorbers are 15 mm shorter than standard shock absorbers, thus lowering the front of the vehicle. This benefits driving stability, top speed, and, not least, the aesthetic appearance. Additionally, the swing arm angle is reduced, which improves the damper response. The resulting larger wheel stabilizes handling at higher speeds.
Height--> 240 mm

The BGM Pro TOURING exhaust offers a significant power increase
on short-stroke engines in the original look. True to its name,
the touring exhaust system is ideal for a fast street engine,
powerful yet visually and acoustically unobtrusive. It harmonizes
very well with common tuning cylinders from 75-112cc displacement, but it is
also clearly superior to the stock exhaust on a standard
50cc engine.

Beautiful original look of Vespa V50 models


Solidly built


Early and high torque


Good peak power


Wide rev range


Higher top speed


Also suitable for 3.50-10 tires


Very discreet


Handmade in Europe


Clear lacquered


The
bgm PRO TOURING exhaust fits without modifications to Vespa V50,
50N/L/R, 50 Special models. The original aluminum manifold is

Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder to help).
WARNING-->Directional silent blocks, must be mounted according to the direction of travel
in the following manner: Left direction of travel: red mark,
right direction of travel: green mark.

Reinforced silent blocks for greater driving stability, mount dry (at most, using talcum powder as an aid).
WARNING--> Directional silent blocks must be mounted according to the driving direction in the following manner: Left driving direction: red mark, Right driving direction: green mark.

7-wire stator composed of: 4-Wire Round Connector: Yellow, Black, Red, Grey; 3 wires in color: Green, White, Red

Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder as an aid).
WARNING--> Directional silent blocks must be mounted according to the direction of travel
in the following manner: Left direction of travel: red mark,
right direction of travel: green mark.

The BGM Pro cross is a high-quality product made of 15CrMo5 (SCM415) chrome-molybdenum steel, it is very durable and at the same time offers elasticity to protect the gears from breakage.

Dimensions--> D.2.1mmxL.20mm

Dimensions--> D.2.1mmxL.20mm

BGM PRO Super Strong clutch What is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs that works well in a power range up to 20hp / 22Nm. With
stiff springs available separately, the clutch does not disappoint, even
with configurations of more than 40 hp.

Misura : 3.50/10
Indice di carico : 59P

Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.3kg

3.50/8
Black

3 wires--> Green, red, black

The performance level and ground clearance have been significantly increased compared to the previous version.
The new Touring revs significantly higher than the previous BBT.

The exhaust pipe has been expanded from Ø18 mm to Ø20 mm. However, to reduce noise levels, the BBT2 is equipped with an exhaust pipe inserted inside the Ø20 mm one with Ø18 mm.
This section is sufficient for almost all engines up to 190cc and about 22-25HP (this value varies depending on the engine structure and the achievable RPM).
Those who drive a very powerful setup with high continuous RPM can remove the Ø18mm exhaust pipe, which is fixed with only one weld point, and thus have the full Ø20mm section.

Increase the main jet by 4-6 points

The bgm PRO clutch springs are produced in Germany and are subject to continuous quality control. The material used, Oteva70®, makes the spring block stable and true to size. The spring does not deviate laterally until it is blocked, and once unloaded, it returns to its original length. The clutch spring retains all its elastic force. The spring rate is significantly narrower than that of an original spring. Ideal for high-performance engines.

20 mm cone, 54 mm stroke, 105 mm connecting rod, additional holes on the connecting rod head improve lubrication.

Silent tires BGM PRO in polyurethane. Much narrower than the original tires, they minimize self-movement. The damping thus works more defined and precisely. The vehicle appears much narrower, the shutters respond faster.

The set contains the two tires for the front axle shock absorber. The
tires are located on the shock absorber and are mounted both above and below
the screwed metal mounting plate of the front fork. They replace the standard silent tires 1:1 without further modifications.

ASSEMBLY
The larger tire is first pushed onto the upper end
of the shock absorber. The smaller tire is located on top
of the mounting plate. The large washer is then placed above the support plate and secured with a toothed washer and a nut. Tightening torque of the upper nut 30-40 Nm.

Just swap the tire with the original ones, ready.

Measurement: 3.50/10
ONLY for tubeless rims

QUALITY FROM EUROPE Precisely manufactured by
a specialized company in Europe. The high-quality base material
14NiCrMo13 was originally developed for the
aerospace sector. Hardened at Thyssenkrupp, it has a surface hardness of
58-60HRC.

PURPOSE The BGM drive shaft
PRO meets the needs of highly tuned engines. It was
designed as a heavy-duty replacement for the original Piaggio main shaft.
The dimensions match the original 1:1. This
means that all transmission components, including those from
other manufacturers, are compatible. It can be used on both standard
engines and heavily reworked engines with high torque at the
wheel.

FIT Fits all
smallframe engines with manual transmission. The only exceptions are the engines of the
first series of the V5A1T models (small side flap, years of
construction 1963-1966). The main shaft corresponds to the latest
construction status of the PK models. Therefore, it has a wheel nut with
M16 thread.

Painted in black

Painted in black

M12 x 1.50 collar Ø:18.6mm h:9mm
key opening:15

Tapered roller bearings have a larger support surface and are therefore much more loadable compared to traditional factory solutions with ball bearings. Tapered roller bearings are much better able to withstand the high loads of powerful braking systems and are also much more wear-resistant.

They increase active driving safety by ensuring the ideal condition of a smooth and non-blocking steering for a very long time. A criterion that will become evident at the latest with the next TÜV inspection.

NOTE: The upper BGM tapered roller bearing is superior to the original one. Therefore, it is not possible to use a locknut to prevent rotation as with the original bearing. For locking, the thread is designed to be self-locking, meaning it is cut tighter and can thus be tightened more securely than an original piece. Additionally, screw locking can be used. Then adjust the bearing play and position the steering tube on the upper bearing ring so that no gap is visible between the two. 

Gas oleo-pneumatic, spring preload adjustment via ring nut, black body and spring

The BGM PRO ball crimper is an intelligently designed tool. It can be used to easily and conveniently install the gear balls with the spring into the main shaft of Vespa Smallframe engines.

Easy disassembly/assembly of the gear balls
The gear balls are held firmly in place

The main shaft is held by the tool - both hands free to mount the gear lever

100% made in Germany

Without this tool, assembling the gear claw is a true test of patience. How do you position and sufficiently preload the balls on both sides at the same time without the gear spring shooting them into the endless expanse of the workshop? It's not uncommon for the balls to simply disappear and you need new ones, of course exactly on a weekend...

With the BGM PRO tool, the job is done in no time. The whole process is so fun that you want to do it over and over again. Simply because it feels so good... Indispensable in every Vespa workshop.

The BGM PRO silicone gasket kits consist of a high-quality gasket paper with a thickness of 0.5 mm (like the original "green" Piaggio). Additionally, the gaskets, which are always in contact with oil, already have a layer of silicone sealant applied. This results in greater surface pressure of the gasket. Furthermore, the silicone sealant seals the cold engine much better thanks to the permanently flexible sealing compound. This way, the engine always remains tight and the oil stays in place and is useful.

100% Made in Italy

The Superstrong 2.0 CR clutch combines extreme durability, absolute reliability, and ease of use. It is the foundation of every solid engine tuning. The solid CNC-machined clutch basket has excellent concentricity and enormous torsional rigidity. Thus, it offers perfect clutch engagement with a well-defined biting point and a clean cut. It is suitable for both the touring rider who appreciates high quality and the ambitious racer seeking an extremely robust and stable clutch.

The bgm PRO clutch springs are produced in Germany and are subject to continuous quality control. The material used, Oteva70®, makes the spring block stable and true to size. The spring does not deviate laterally until it is blocked, and once unloaded, it returns to its original length. The clutch spring retains all its elastic strength. The spring rate is significantly tighter than that of an original spring. Ideal for high-performance engines.

Brilliant extension for maneuver assistance of the BGM PRO for all
classic Vespa and Lambretta scooters. With the addition for the rear
wheel, the vehicle can be turned on the spot. This way the scooter can
be stored well and safely even in the smallest corner and
can be easily removed again. All this without any
effort.

Size--> 2.10-10" with pre-installed valve

WEIGHT REDUCTION The weight saving compared to an original PX steel rim is 600 grams. Additionally, there is a weight saving of about 370 grams due to the no longer necessary tube. The unsprung masses are thus reduced by almost one kilogram per axle (over 64%). The response behavior of the frame improves significantly.

SAFETY
Due to a so-called double "hump" in the rim well, the tire is always safely guided in the rim. Similar to the latest run-flat technology in the automotive sector, if a foreign object (nail or similar) is pushed into the rim, the air can escape slowly without the tire slipping into the rim well. The vehicle stops in a controlled manner. The rim has recesses between the bolting points. Brake cooling is improved.

SPECIAL FEATURES The track offset is 2.5 millimeters on the left side. Mounting aluminum rims on both axles equalizes the track offset. This is not noticeable while driving. The rim does not have a test mark and is not road legal.

For tubeless tires (TL)

BGM FASTER FLOW SI Carburetor - optimized carburetor for high-performance engines

High-performance engines require reliable and consistent fuel supply. The BGM FASTER FLOW carburetor is designed to meet these needs, using the Dell'Orto/Spaco SI24/24E or SI26/26E models. Each unit is completely disassembled, tested, reworked, cleaned, and carefully reassembled in our factory, ensuring the highest quality for modified engines.

Main modifications:

Enlarged connection holes from the float chamber to the nozzles
Added a hole in the float needle area
Spring-loaded float needle for increased durability
These modifications significantly improve fuel supply, preventing shortages even with powerful exhausts. In particular, the spring-loaded float needle compensates for vibrations and increases durability, while the optimized supply is also advantageous for stock engines.

Advantages:

No nozzle blockage with powerful exhausts
Easy tuning even with over 20 HP
Quiet, powerful, and suitable for everyday use
Available for mixed or separate lubrication
Suitable for:
Engines with SI20/20D or 24/24E carburetors

We subjected the set to a long and thorough stress test on the road and highway. The result is so convincing and reliable that we can now offer it as a set for the expert mechanic.
It allows the use of a Malossi 210 Sport cylinder from the PX200/Rally/Cosa models on the engine casings of the Vespa Largeframe models starting from 1977, the date from which the engine casings were converted to three transfers.

ADAPTER SET
The conversion is based on a crankshaft with rods 20 mm longer (125 mm instead of 105 mm). The solid CNC machined steel adapter plate is bolted to the engine casing and accepts the studs for the PX200 cylinder. A 1.5 mm thick aluminum gasket between the adapter plate and the cylinder base seals the screw holes and establishes the correct installation height.

MALOSSI SPORT
adapter set 07-AA-179-IR is designed for use with a Malossi Sport 210 cylinder. For this purpose, however, it is absolutely necessary to remove the spindle from the engine casing, as the Malossi cylinder base cannot be shortened without losing stability.

The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base setting and is therefore very well suited for use with stiff sports springs. The compression/rebound adjustment prevents diving or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort while driving.

Connecting rod: 105 mm, Stroke: 60 mm, Pin: 15 mm
Note--> Valve

WIDE FRAME ENGINE ISSUE: The BGM Pro and Corteco oil seals, which are of much higher quality, are available (for safety reasons) only with a 0.8 mm sheet metal coating. If they are installed in a wide frame engine, the crankshaft bearings deform, causing damage to the bearings.

WIDE FRAME ENGINE SOLUTIONS: The circumferential bead of the oil seal is flattened, reducing the height of the oil seal plate by about 0.3 mm. The bearings then run freely. b) The BGM Pro bearing set with special FAG 9-ball bearings. In this case, the shoulders of the bearings have been custom machined to ensure stress-free mounting of the crankshaft bearing. The set includes high-quality resistant BGM Pro FKM/Viton® oil seals.

Full shoulders Ø88mm, stroke 54mm, connecting rod 105mm, shaft length 48mm.
Wrist pin 15 mm

flywheel side bearing seat diameter: 25mm
flywheel side oil seal seat diameter: 24mm

The BGM 200cc cylinder is an improved version of the already reliable and powerful original cylinder. Suitable for 200cc engines of the Rally200, PX200, Cosa200, and the Spanish models DS/DN/TX/Iris, the BGM cylinder offers an additional advantage in terms of safety and performance thanks to an exact honing of 9/100 operating distance and slightly larger transfer ports. This makes it slightly more powerful and more fuel-efficient compared to the original.
 

The original head can be used, ready for installation with pistons, clips, piston pins, and base gasket.

High-quality material ensures a very smooth sliding operation in all conditions.

Cone 20 mm, stroke 54 mm, connecting rod 105 mm
Shoulder--> 86 mm      weight 130 gr
For reed valve intake.

Cuts--->  0.25mm/0.50mm/0.75mm

KIT COMPOSTO DA / KIT COMPOSED OF:
N.1 PARAOLIO CORTECO 20x62x6,5 LATO FRIZIONE 
N.1 PARAOLIO CORTECO 20x40x6 LATO VOLANO 
N.1 PARAOLIO CORTECO (27X37X7) RUOTA POSTERIORE
+ ANELLI OR

The primary BGM wheels are bulletproof. Developed for the immense power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest production standards. The enormous strength of the base material (up to 1100N/mm2, HRC 58-62) provides a safe and reassuring foundation for the production of BGM primary wheels.

Straight teeth for high-torque engines
High-quality material 15 CrMo 5
Precise production according to Honda standard
Continuous quality control
Usable with all transmissions produced since 1962 (or all with primary springs 30 mm long)
Available with 62 or 63 teeth
Combinable with the BGM Pro straight-toothed coupling pinion for COSA2: 23Z, 24Z, 25Z
Includes special BGM Pro primary repair kit (harder springs, modified cover plates)
The feature of BGM wheels is their black color and the practical writing indicating the number of teeth on the pinion.

Thanks to the possible combination with BGM Pro straight-toothed clutch pinions

Paraolio mozzo posteriore: 27

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, so it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is also forged and then CNC machined. LUBRICATION
The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC rolling bearing and side thrust washers provide a solid bearing. The lubrication of the upper connecting rod bearing is done through two lubrication holes. The INA piston pin bearing is included with the crankshaft.

The shaft is available with a long stroke of 60mm (long stroke) and with a 57mm stroke
(standard). With the long stroke version, you get a larger displacement, while at the same time the cylinder control angles (overflow and exhaust ports) can be modified to increase performance. GEAR ANGLE Compared to many other racing shafts, the bgm PRO Touring shaft has a much better intake layout. For
tuning cylinders, the standard wave, with its very short intake time, cannot keep up with the standard wave. The bgm PRO shaft, on the other hand, closes on a PX engine

The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as models VM, VN, VB, VL, and GS150. It is a sporty, comfortable, and adjustable product, TÜV certified. The spring preload is continuously adjustable and the shock absorber is factory pre-configured.

Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, allowing use also on vehicles prior to 1955. Two screw adapters (M8 and M9) specific to each model are included. The shock absorber is adjustable in length between 385 and 420 mm.

Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long durability. Its sporty and harmonious design ensures excellent on-road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.

The shock absorber has a KBA and ABE test mark, with a very competitive price/quality ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body and a solid

The BGM Pro SC SPORT shock absorber is designed for Vespa with a wide frame, such as the VM, VN, VB, VL, and GS150 models. It is a sporty, comfortable, and adjustable product, with TÜV certification. The spring preload is continuously adjustable, and the shock absorber is pre-configured at the factory.

Suitable as a direct replacement for models from 1955 to 1954 inclusive, the spring and shock absorber are separate. For later models, an upper shock absorber mount is available, sold separately, allowing use on vehicles prior to 1955. Two screw adapters (M8 and M9) specific to each model are included. The shock absorber is adjustable in length between 385 and 420 mm.

Made of high-strength aluminum and CNC machined, it has hard anodized surfaces for optimal protection and long durability. Its sporty and harmonious design ensures excellent road performance. The suspension reduces dive during braking and roll during acceleration, improving handling and stability.

The shock absorber has a KBA and ABE test mark, with a very competitive price/quality ratio. The technology used comes from the BGM Pro SC COMPETITION shock absorber, with an anodized body and

Gas oleo-pneumatic, compression and extension can be adjusted separately through 12 millimetric adjustments. The spring preload is precisely adjustable, body made of very resistant light alloy, spring and tank anodized in dark gray color.
Height--> 330 mm

The primary BGM wheels are extremely robust, designed to withstand the enormous power and torque of modern engines. Made from high-alloy steel (SCM415 / 15 CrMo 5) and produced according to the highest standards, they offer exceptional base material strength (up to 1100N/mm2, HRC 58-62), thus ensuring a solid and reliable foundation for the production of BGM primary wheels.

Gas oleo-pneumatic, Compression and extension can be adjusted
separately through 16 millimetric adjustments. The spring preload is
precisely adjustable, body made of very resistant light alloy,
spring and anodized reservoir in dark gray color.
Height--> 225 mm

The Superstrong 2.0 CR joint combines extreme durability, absolute reliability, and ease of use. It is the foundation of every solid engine tuning.
The solid CNC-machined clutch basket has excellent
concentricity and enormous torsional rigidity. It therefore offers a perfect
clutch engagement with a well-defined bite point and a clean cut. It is suitable for both the touring rider who appreciates high quality,
and the ambitious racer looking for an extremely robust and
stable clutch. ULTRALUBE The latest generation Superstrong 2.0 CR clutches are now equipped with a new innovative technology: Ultralube. Ultralube
delivers (through precisely defined holes and centrifugal force)
gear oil both in the high-load hub profile (between the
clutch basket and the clutch hub) and in the clutch linings themselves. This technology, unique in the Vespa sector,
makes the legendary Superstrong 2.0 CR clutch even more stable than
it already is. A clutch designed for eternity. PERFORMANCE
The clutch provided ready for installation is adjusted for a
power range up to approx. 20PS /

The new BGM Pro Touring muffler is a true wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the inconspicuous design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust even at low revs.
Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175

Developed for the high performance and torque of today's engines, they are made of highly alloyed steel (SCM415/15 CrMo 5), in compliance with the highest production standards. The enormous strength of the base material (up to 1100N/mm2, HRC 58-62) is a reliable foundation for the production of BGM sprockets.

The production meets the high standards in place for Honda gear manufacturing. Each individual piece is accompanied by a test report, allowing BGM to have continuous and lasting quality assurance.

High-quality material 15 CrMo 5
Precise production according to Honda standards
Continuous quality controls
Compatible with COSA2 clutches
Available with 22, 23, and 24 teeth
Compatible with the original primary of all 200 c.c. engines
Compatible with engines with original primary retrofitted with 65 teeth or with BGM primary with 64/65 teeth

To complete the conversion, it is necessary to purchase:

- Stator BGM PRO HP V2.0 code 07-FU-031-S
- Voltage regulator code 05-GE-018-IR
- CDI unit code 07-AF-018-IR

Stator specifically developed for the conversion of engines with points and condenser to electronic ignition.
After the conversion, the previous 6Volt power supply system has a powerful 12Volt light output.

The shock absorbers from the BGM PRO SC series are the ideal solution for adjustable Vespa suspension, approved with TÜV certificate. Developed in Germany, they are available with ABE (safety certification) for most manual transmission Vespa scooters. These shock absorbers are fully adjustable, offering an exceptional and customizable riding experience. Here are the main features:

- Available individually or in sets
- Sporty design and competitive price
- Made of high-strength aluminum to reduce weight
- CNC anodized body for increased durability
- Adjustable damping up to 12/16 levels and adjustable spring preload
- Quality guaranteed by BGM, also confirmed by professional riders

Two length adapters are included for the Vespa PK model, allowing use with both standard and shortened forks, and they fit both drum and disc brakes.

BGM PRO Super Strong clutch What is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs that works well in a power range up to 20hp / 22Nm. With
stiff springs available separately, the clutch does not disappoint, even with configurations of more than 40 hp.

Grazie al sistema soft stop del cavalletto centrale BGM PRO i piedi
del cavalletto non sbatteranno più contro la pedana della tua Vespa.

Come
per i modelli Vespa PX, la battuta del cavalletto è ora posizionata
sulle stabili staffe per il montaggio presenti sul tunnel centrale. Il cavalletto centrale viene bloccato al punto giusto senza far vibrare la pedana.
Chiudere il cavalletto sarà meno rumoroso e il telaio sarà meno
soggetto a urti o danneggiamenti come invece accadeva utilizzando il
cavalletto centrale originale.

Il cavalletto centrale Soft Stop
viene fornito con le relative staffe che dispongono di ulteriori
placchette su cui è posizionato il cavalletto. Tali piastrine
impediscono il contatto diretto tra il tubo del cavalletto e il telaio
facendo sì che quest'ultimo rimanga intatto. Il cavalletto centrale
originale, invece, rigava la vernice della pedana.

Grazie al sistema soft stop del cavalletto centrale BGM PRO i piedi
del cavalletto non sbatteranno più contro la pedana della tua Vespa.

Come
per i modelli Vespa PX, la battuta del cavalletto è ora posizionata
sulle stabili staffe per il montaggio presenti sul tunnel centrale. Il cavalletto centrale viene bloccato al punto giusto senza far vibrare la pedana.
Chiudere il cavalletto sarà meno rumoroso e il telaio sarà meno
soggetto a urti o danneggiamenti come invece accadeva utilizzando il
cavalletto centrale originale.

Il cavalletto centrale Soft Stop
viene fornito con le relative staffe che dispongono di ulteriori
placchette su cui è posizionato il cavalletto. Tali piastrine
impediscono il contatto diretto tra il tubo del cavalletto e il telaio
facendo sì che quest'ultimo rimanga intatto. Il cavalletto centrale
originale, invece, rigava la vernice della pedana.

BGM PRO Super Strong clutch is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs that works well in a power range up to 20hp / 22Nm. With separately available stiff springs, the clutch does not disappoint, even with configurations of more than 40 hp.

Grazie al sistema soft stop del cavalletto centrale BGM PRO i piedi
del cavalletto non sbatteranno più contro la pedana della tua Vespa.

Come
per i modelli Vespa PX, la battuta del cavalletto è ora posizionata
sulle stabili staffe per il montaggio presenti sul tunnel centrale. Il cavalletto centrale viene bloccato al punto giusto senza far vibrare la pedana.
Chiudere il cavalletto sarà meno rumoroso e il telaio sarà meno
soggetto a urti o danneggiamenti come invece accadeva utilizzando il
cavalletto centrale originale.

Il cavalletto centrale Soft Stop
viene fornito con le relative staffe che dispongono di ulteriori
placchette su cui è posizionato il cavalletto. Tali piastrine
impediscono il contatto diretto tra il tubo del cavalletto e il telaio
facendo sì che quest'ultimo rimanga intatto. Il cavalletto centrale
originale, invece, rigava la vernice della pedana.

chromed body - smooth gem / orange bulbs

BGM PRO Super Strong clutch What is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs that works well in a power range up to 20hp / 22Nm. With separately available stiff springs, the clutch does not disappoint, even with configurations of more than 40 hp.