Crankshafts for Si, Ciao, and Bravo
Discover the best selection of crankshafts for Piaggio Ciao, Sì, and Bravo. This component is the beating heart of the engine block, essential for ensuring reliability and performance. Whether you are preparing a high-performance tuning and looking for an advanced high-performance crankshaft (like Jasil or Malossi), or you need to replace the original for a restoration, here you will find the right replacement. We offer crankshafts made with high-quality materials to ensure maximum durability, reduced vibrations, and perfect balance for your engine. Filter by model and find the compatible crankshaft for your Ciao, Bravo, or Sì.
Engine crankcase master 43X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Carter Motor Pinasco Power Casing for Piaggio Moped has been designed to accommodate a crankshaft with the valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (supplied), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Master engine crankcase 46X46 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfers. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Piaggio Ciao, Piaggio Yes
Advanced version
The Pinasco crankshaft, made of case-hardened steel, chrome-plated, advanced and polished on the intake side, ensures high performance in any driving condition
46X43 slave engine casing with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve-side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional) and additional CNC-machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm, and comes with the dedicated crankshaft and all mounting accessories.
46X46 slave engine casing with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Crankcase for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional) and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all assembly accessories.
Engine slave casing 43X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Block for Piaggio Moped has been designed to accommodate a crankshaft with the valve side shoulder 5mm wider than the original, with a stroke of 43mm and 46mm, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Master engine crankcase 46X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Carter Motor Pinasco Power Casing for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, stroke of 43mm and 46mm, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed, for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all accessories for installation.
Spacer washer between clutch assembly and engine shaft front drive pulley for Piaggio CIAO BRAVO SI WITHOUT VARIATOR
Piaggio CIAO
Piaggio BRAVO
Piaggio SI
Only for models WITHOUT VARIATOR
Ref. Orig 104040
Yes-iao-Bravo
Crankshaft Woodruff Key Malossi 3x4x13.5mm for Piaggio Ciao Bravo Si
This special key has been designed and manufactured by Malossi
specifically to eliminate the problem of potential fatigue failure
in Malossi crankshafts art. 531802 and 537313 for Piaggio
mopeds.
Mazzuchelli advanced crankshaft pin 10 for PIAGGIO CIAO/PX/SI/Bravo/Superbravo/Grillo/Boss 50cc 2-stroke AC
PIAGGIO CIAO/PX/SI/Bravo/Superbravo/Grillo/Boss 50cc 2-stroke AC
timing: 120°/100° at TDC
wrist pin 10
Piaggio Ciao, SI, Bravo
Piaggio Ciao, SI, Bravo
Piaggio Ciao-SI-Bravo
TECHNICAL FEATURES
Half-shaft material: 18 Ni Cr Mo5.
Monolithic forged half-shafts and rotating masses.
Machining on high-precision machine tools.
As many as five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged connecting rod in 18 Ni Cr Mo5 copper-plated, coupled to the shaft with a precision roller bearing for high speeds.
Piaggio Ciao, SI, Bravo
Ref. Orig 113708
Original type crankshaft JASIL pin mm.12 for Piaggio Ciao SI Bravo
Piaggio Ciao, SI, Bravo
Ref. Orig 113708
Piaggio Ciao-SI-Bravo
TECHNICAL FEATURES
Half-shaft material: 18 Ni Cr Mo5.
Monolithic forged half-shafts and rotating masses.
Machining on high-precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged rod in copper-plated 18 Ni Cr Mo5, coupled to the shaft with a precision roller bearing for high speeds.
Piaggio Ciao, Piaggio Yes
Advanced version
The Pinasco crankshaft, made of case-hardened steel, chrome-plated, advanced and polished on the intake side, guarantees high performance in all driving conditions
Piaggio Ciao, SI, Bravo
Piaggio Ciao-Si
Economic Version
Original type crankshaft JASIL pin mm.10 for Piaggio Ciao SI Bravo
Piaggio Ciao, SI, Bravo
Ref. Orig 184154
Piaggio Ciao/Si/Bravo
Dimensions--> 12x14x12mm
Orig. Ref 242965
Piaggio Ciao, SI, Bravo
Ref. Orig 184154
Original type crankshaft pin mm.12 for Piaggio Ciao SI Bravo
Piaggio Ciao, SI, Bravo
Economy Version
Ref. Orig 113708
Piaggio Ciao/Si/Bravo/boxer
Ref.Orig 166920-500521
Dimensions--> 10x13x14mm
Needle roller cage piston pin 12x15x15 for Piaggio Ciao/Si/Bravo
Piaggio Ciao/Si/Bravo
Dimensions--> 12x15x15mm
Piaggio Ciao, SI, Bravo
Hai visualizzato 27 di 27 prodotti