Spare Parts Vespa 50 Sprinter V5SS2T
An exclusive selection of spare parts for Vespa 50 Sprinter (chassis V5SS2T), the rare "fast" version produced in the '70s for the foreign market. Here you will find the hard-to-find components for this collector's model: from the iconic "Sprinter" adhesive stripes for the shield and sides, to the specific thermal group that made it faster than the standard 50. Rely on our catalog for a faithful restoration of this piece of Vespa history.
Thermal group VMC ET6-60 144cc Ø 60mm and stroke 51mm Vespa 50/125-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
7-port aluminum cylinder, shell moulding technology, Liner with Nikasil treatment
Bore diameter 60mm Stroke 51mm Displacement 144cc, EXHAUST PORT WITH BOOSTERS
Main Transfer phases 128° Exhaust 188°, exhaust stud spacing 60mm, oval exhaust outlet diameter 32mm
The exhaust that with a slight filing can be enlarged to 36mm to fit our Evo SeiDue and Kifly 62 exhausts
Piston with 2 steel Rik rings, complete with pin and clips.
Die-cast aluminum head with SIDE spark plug with 4 additional fixing screws.
Squish 1.1mm ± 0.1mm. Tightening of M7 studs: 11÷12 Nm, Tightening of M6 screws 10÷11 Nm
Complete with bolts and paper cylinder gaskets of various thicknesses.
It is a cylinder suitable for extreme modifications.
Mounted with a VMC Evo 62 it requires a close-ratio gearbox and with more generous expansion exhausts like the VMC Kifly 62 can reach power levels around 30hp
M7 MD Racing nuts (4pcs) for VESPA stud bolts 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Special solid nuts for Vespa cylinder prisoners.
They have a height of 10mm compared to the 7mm of commercial ones.
Classic 11mm hexagon made from solid and a 13.8mm ring underneath to rest on a larger surface.
4 pieces
Complete thermal group Pinasco (102 cc) in Aluminum with chrome-plated barrel for Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore: 55
Stroke: 43
Displacement: 102 cc
Cylinder base engine case Pinasco/Quattrini for Vespa 50/90/125 Primavera ET3 / PK-Ape 50
Vespa 50/90/125 Primavera ET3 / PK
Complete thermal group POLINI Evolution 135 cc in cast iron 140.0050/E for Vespa 50-125/PV/ET3/PK/S/XL/2-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
cast iron
6 transfers
Ø 58.0mm
stroke 51mm
incl. cylinder head
Recommended spark plug: NGK BR9ES
Recommended ignition timing: 17°
Complete thermal group POLINI Evolution 3 135 cc in aluminum 140.0234 for Vespa 50-125/PV/ET3/PK/S/XL/2-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
aluminum
Ø 58.0mm
stroke 51mm
incl. cylinder head
Recommended spark plug: NGK BR10EG
Recommended ignition timing: 17/18°
Complete Malossi cast iron thermal group (102 cc) for Vespa 50 N/L/R-Special-PK-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore: 55 mm
Stroke: 43 mm
Transfers: 6
KIT exhaust manifold fastening prisoners M 8 x 30 mm (2 pcs) for Vespa 50 N/L/R-Special-/PK50/S/XL/N/HP
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa PK 125 S Automatic VAM1T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 N (FL) VMX7T
Size: M 8 x 30 mm
Preloaded washers M7 MD Racing (4pcs) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150 studs
Vespa 50
Vespa 125
Vespa 150
Special harmonic steel washer kit with preload
specifications to compensate the play of thermal excursions of Vespa cylinder studs.
These washers are completely compressed at 1.3kgm (tightening of Vespa studs)
and compensate for the loosening of studs subjected to heating.
Dimensions:
inner diameter 7.5mm
outer diameter 16.8
thickness 1.8mm
washer height at rest 2.18mm
excursion approximately 0.38mm
Removes contaminant deposits from: butterflies, mono injectors, E.G.R. valves, carburetors. Ideal for cleaning external and internal parts. Cleans without the need for disassembly.
Fabbri Racing PVL ignition fan anodized Purple for Vespa 50/90/125 Special/N-L-R-Primavera-PK
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK S/XL, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PK S/XL
Material: CNC machined aluminum
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 yellow - Vespa Smallframe
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing
Bitubo adjustable front shock absorber for Vespa 50 N/L/R-Special-PK/90/125 Primavera ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Gas-pressurized shock absorber (Nitrogen) with separate compensation reservoir.
ADJUSTMENT
The continuously adjustable millimetric ring for spring preload, and the knob with clicks (12 clicks) for Compression damping adjustment, allow you to customize the suspension setting according to your needs and riding preferences.
Tapered needle carburetor Dell'orto SHB/SHBC for Vespa 50/90/125/Primavera/ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Triangular section
All models/All models
Stainless steel screw kit with hex head for fan cover mounting for Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Kit consisting of 3 Mx10 screws
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
SIP 76° side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
chrome
with 2 springs, self-folding
SIP 76° red stem side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
red
with 2 springs, self-folding
All models / Tutti i modelli
All models
Graft Hole: 5 mm
Footrest bracket m16 GP racing parts in Black for Piaggio Ciao/SI/Bravo
Piaggio Ciao/SI/Bravo
The aluminum bar, of high strength, due to its 16mm diameter, provides a stable base for the knurled footpegs, a design that ensures excellent grip and super effective non-slip for both shoes and asphalt and off-road boots.
The footpegs are mounted directly onto the bar and secured using a nut-against-nut system, with the insertion of a washer that prevents loosening. To ensure further security, it is advisable to apply a minimal amount of threadlocker on both sides. The assembly requires only two wrenches: one 22 mm and one 20 mm.
Once properly secured, the footrests will remain stable and safe, requiring very little maintenance.
The knurled footrests are available in five colors:
-timeless aluminum color
-black, elegant and timeless
-gold, for a touch of luxury
-red, bold and gritty
-blue, lively and modern
Black plastic license plate holder for Vespa 50 N/L/R-Special-PK
Scooter-Vespa 50 cc new plates from 2004
In Plastic
Specifically designed for wire exchange
The brass pad does not mark the wire.
for VHSB/VHSC carburetor
Bronzed
Tank and seat fastening
Tank and seat fixing
5 Pcs Kit
Zincate, 10 pieces
for VHSB/VHSC carburetor
Vespa 50 Special V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Load index 50J, tubeless
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
All Models / Tutti i modelli
Shield anchoring
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).