Carter for Yes, Hello, and Bravo
The engine crankcase represents the true structural heart of your Piaggio Ciao, Si or Bravo. Often, a scratched or worn intake valve makes it impossible to achieve stable carburetion: replacing the crankcase is the only definitive solution to regain a reliable engine. In this section, we offer both original-type spare parts for faithful restorations and the legendary racing crankcases (like Malossi or Polini) with reed valve intake. The latter are the essential base for those seeking high performance, allowing the accommodation of larger carburetors and guaranteeing an optimized mixture flow for maximum performance.
Engine crankcase master 43X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Carter Motor Pinasco Power Casing for Piaggio Moped has been designed to accommodate a crankshaft with the valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (supplied), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Piaggio Ciao/Si/Bravo/boxer
Suitable for high-level modifications, 70cc/80cc
Including Malossi reed valve block.
Master engine crankcase 46X46 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfers. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Engine housing for models with contact point ignition Ciao-SI-Bravo-Boxer
Piaggio Ciao/Si/Bravo/Boxer
An exact replica of the original PIAGGIO base produced for Ciao, Bravo, Si, etc. mopeds, suitable for standard and modified engines.
The supply includes all the nuts, bolts, and washers necessary for assembly, cylinder mounting pins, and both crankshaft bearings.
Polini engine casing for models with electronic ignition (4 studs)
Piaggio Si/Grillo
POLINI 4P Speedengine engine crankcase with four cylinder studs. The supply also includes:
- all bearings and gaskets - the two-piece intake manifold with intake membrane and pad - spacer bushing for mounting - closure plate for standard intake
PIAGGIO CIAO/PX/SC 50ccm 2T AC
155 pieces
Pivot wheel axle for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot tree rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox that does not require any modification.
Pivot shaft 119.6mm with Ø 23 fitting for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot shaft rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox without requiring any modification.
Malossi technicians have worked to increase the rigidity and robustness of the shaft itself.
Ideal pairing: Malossi gears, for exaggerated performance!
Note: For maximum operational precision, the gear wheel is mounted with a slight interference on the wheel shaft.
Technical data
Shaft diameter: Ø 23.
Total length: 119.6 mm.
Material: special trilayer steel made to our specifications, case-hardened and tempered.
Manufactured on high-precision machine tools.
Individually checked to ensure exact operational clearance.
Completely ground.
Pinasco 2.0 street variator hub for Piaggio Ciao PX with variator
Piaggio Ciao PX with variator
Pinasco has developed a new variator hub for Piaggio mopeds featuring cutting-edge technical solutions that solve the reliability issues of traditional hubs.
Immediately noticeable are:
- the internal reinforcement ribs that stiffen the hub casing,
- the brake shoe guide with its tab for spring attachment is no longer riveted but screwed to the casing, this solution facilitates maintenance and possible repairs.
- the 360° rotatable oil release valve from hydraulic derivation.
- external reinforcements in the bearing area
- the roller cages are mounted in special steel bushings that increase the stress distribution surface.
- alternatively, Pinasco has also made the model with ball bearings that can be converted with steel bushings into the roller cage model.
The new Pinasco hub has been tested during the Monferraglie and "Monfareis" races with excellent results.
The roller cage model is recommended for OFFROAD use and the ball bearing model for ROAD use.
The kit includes bearings, oil seals, and gaskets as shown in the photo.
Applications: Boxer, Bravo, Ciao, Si, Grillo, CBA, ECO.
46X43 slave engine casing with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve-side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional) and additional CNC-machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm, and comes with the dedicated crankshaft and all mounting accessories.
46X46 slave engine casing with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Crankcase for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional) and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all assembly accessories.
Engine slave casing 43X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Block for Piaggio Moped has been designed to accommodate a crankshaft with the valve side shoulder 5mm wider than the original, with a stroke of 43mm and 46mm, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Master engine crankcase 46X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Carter Motor Pinasco Power Casing for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, stroke of 43mm and 46mm, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed, for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all accessories for installation.
Malossi MP-ONE reed valve engine casing for models with Ciao-SI-Bravo-Boxer electronics
Piaggio Ciao/Si/Bravo/Boxer
Pair of shot-blasted silicon aluminum alloy die-cast crankcases.
Integral Malossi project with reed valve intake, controlled by a large
4-petal valve.
They can be used with any thermal group, exhaust system, crankshaft, and
intake system.
The Malossi reed valve crankcases are perfectly interchangeable with the
original ones and are equipped with a special intake manifold for the
original carburetor or a SHA 13/13 carburetor.
A specific intake system has been created with a 19 mm carburetor and E12 type air filter, complete with all components for
installation.
Given the very limited insertion spaces in Piaggio frames, it was
necessary to create a super compact engine, and the great commitment of
our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, robustness,
simplicity, ease of installation, excellent operating result
without modifications (everything connects as in the original engine).
The large 4-petal composite fiber reed valve ensures a
Gear tree for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
rear wheel
Malossi MP-ONE reed valve engine casing for models with points ignition Ciao-SI-Bravo-Boxer
Piaggio Ciao/Si/Bravo/boxer
Pair of shot-blasted aluminum-silicon alloy die-cast crankcases.
Integral Malossi project with reed valve intake, controlled by a large
4-petal valve.
They can be used with any thermal unit, exhaust system, crankshaft, and fuel system.
The Malossi reed valve crankcases are perfectly interchangeable with the
original ones and are equipped with a special intake manifold for the
original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburetor and E12 type air filter, complete with all the components for mounting.
Given the very limited insertion spaces in Piaggio frames, it was
necessary to create a super compact engine, and the great effort of
our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, robustness,
simplicity, ease of assembly, excellent operating result
without modifications (everything connects like in the original engine).
The large 4-petal composite fiber reed valve ensures a
Piaggio Ciao/Si/Bravo/boxer
Malossi Gear box rear hub for Piaggio Ciao/Si/Bravo/Boxer/Grillo with variator
Piaggio Ciao/Si/Bravo/Boxer/Grillo with variator
Complete with bearings, seals, and shims.
Hai visualizzato 18 di 18 prodotti