Gear shift for Si, Ciao, and Bravo
The rear hub is often overlooked, but it is there that the final speed and quietness of the ride are determined. In this section, you will find everything you need for the transmission overhaul of the Piaggio Ciao, Si, and Bravo: from replacement gears to eliminate annoying noises and play, to the famous extended gear kits (or primary). The latter are the favorite upgrade for tuners: they allow you to transform engine revolutions into pure speed, reducing over-revving and making the most of the power of enlarged thermal groups both with pulley and variator.
Malossi HTQ rear hub gear kit short ratio (13:1) with variator for Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Primary gears Pinasco with short ratio (11.9:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specifically for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet, the main gear has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) always ensuring the correct alignment of the half-pulleys even in the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Single-speed rear hub gear kit (reduced speed) for PIAGGIO CIAO P (CH) - CIAO PX (CH) - CIAO P (DK) - BRAVO P (DK) - CIAO ERRE 2 ('75-'81) - SI' (DK/ES/USA)
PIAGGIO CIAO P (CH) - CIAO PX (CH) - CIAO P (DK) - BRAVO P (DK) - CIAO ERRE 2 ('75-'81) - SI' (DK/ES/USA)
For models WITHOUT Variator
The kit includes:
-Z9 Shaft
-Straight teeth wheel Z 76
Primary gears Pinasco with long ratio (9.5:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from specific alloy steel for gears, the new Pinasco SPRINT GEARS are extremely durable and quiet, with the main pinion having a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward), always ensuring the correct alignment of the pulleys even under the most demanding use.
The Pinasco SPRINT GEARS, complete with washers, can also be mounted on all original Piaggio variator wheel hubs.
Pivot wheel axle for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot tree rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox that does not require any modification.
Pivot shaft 119.6mm with Ø 23 fitting for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot shaft rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox without requiring any modification.
Malossi technicians have worked to increase the rigidity and robustness of the shaft itself.
Ideal pairing: Malossi gears, for exaggerated performance!
Note: For maximum operational precision, the gear wheel is mounted with a slight interference on the wheel shaft.
Technical data
Shaft diameter: Ø 23.
Total length: 119.6 mm.
Material: special trilayer steel made to our specifications, case-hardened and tempered.
Manufactured on high-precision machine tools.
Individually checked to ensure exact operational clearance.
Completely ground.
Ingranaggi primari Malossi HTQ a rapporto corto (13:1) per Piaggio Ciao-Si-Bravo con variatore
Si-Ciao-Bravo con variatore
Questi ingranaggi nascono usufruendo della ventennale esperienza della
Malossi nella progettazione e realizzazione di ingranaggi. I nuovi
ingranaggi H.t.q. sono stati studiati e realizzati con denti dritti /
elicoidali per ridurre al minimo le perdite per attrito e le
sollecitazioni sui supporti. Inoltre i nostri ingranaggi ottimizzano la
rapportatura permettendo di sfruttare tutta la potenza erogata dal vostro
mezzo garantendovi un notevole allungo rispetto la condizione originale.
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
Ref. Orig 1786975
Primary Malossi HTQ long ratio gears (9:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
These gears are born from the twenty-year experience of
Malossi in the design and production of gears. The new
H.t.q. gears have been studied and made with straight /
helical teeth to minimize friction losses and
stress on the supports. Moreover, our gears optimize the
gearing, allowing you to exploit all the power delivered by your
vehicle, ensuring a significant extension compared to the original condition.
Primary Pinasco short ratio gears (12.3:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new Pinasco SPRINT GEARS are extremely durable and quiet. The main pinion has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) ensuring the correct alignment of the half-pulleys even in the most demanding use.
The Pinasco SPRINT GEARS, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Primary gears Pinasco with medium ratio (10.8:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Bravo with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet. The main pinion has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) ensuring the correct alignment of the half-pulleys even under the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Primary gears Pinasco with long ratio (9.2:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet, the main gear has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) always ensuring the correct alignment of the pulleys even in the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Gear tree for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
rear wheel
Primary Pinasco gears with medium ratio (10.4:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various gear ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet, the main pinion has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) always ensuring the correct alignment of the half pulleys even in the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Duplo gear z10 straight teeth - z29 helical teeth for Piaggio Ciao Bravo SI
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
Ref. Orig 178696
Extended ratio gear kit for variator box for Piaggio Ciao Bravo SI
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
The kit includes:
- Reinforced helical teeth shaft z10
- Extended straight teeth wheel z36
- Extended dual gear straight teeth z11 and helical teeth z29
- Reinforced idler gear z23 helical teeth
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
The kit includes:
-Reinforced helical teeth shaft z10
-Reinforced straight teeth wheel z37
-Reinforced dual straight teeth gear z10 and helical teeth z29
-Reinforced idler gear z23 helical teeth
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
Reinforced helical teeth z10 gear shaft for Piaggio Ciao Bravo SI
Piaggio Ciao, Bravo, YES
Ref. Orig 176447
Reinforced idler gear z23 helical teeth for Piaggio Ciao Bravo SI
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
Extended duplex gear z11 straight teeth - z29 helical teeth for Piaggio Ciao Bravo SI
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
Hai visualizzato 21 di 21 prodotti