Spare Parts Vespa 50 Sprinter V5SS2T
An exclusive selection of spare parts for Vespa 50 Sprinter (chassis V5SS2T), the rare "fast" version produced in the '70s for the foreign market. Here you will find the hard-to-find components for this collector's model: from the iconic "Sprinter" adhesive stripes for the shield and sides, to the specific thermal group that made it faster than the standard 50. Rely on our catalog for a faithful restoration of this piece of Vespa history.
All models
Vespa 50/90/125/150/180/200
M10x1.2 thread
Mirror size: 115x60mm
SIP right brake lever for Vespa 50-125/โPV/โET3/โPK/โS/โXL/โ125 VNAโTS/โ150 VBA-T4/โ160 GS/โ180 SS/โRally/โPX80-200/โPE/โLusso
Vespa 50-125/โPV/โET3/โPK/โS/โXL/โ125 VNAโTS/โ150VBA-T4/โ160 GS/โ180 SS/โRally/โPX80-200/โPE/โLusso
CNC aluminum
silver anodized
ATHENA Classic Engine Gasket Kit for Vespa 50/90/125 Primavera ET3-Special
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Grease nipple joint spring M8x1.25 mm for Vespa 125 GTR 2ยฐ/TS 2ยฐ/150 Sprint V 2ยฐ/Super 2ยฐ/200 Rally 2ยฐ/P150S
for Vespa 125 GTR 2ยฐ/โTS 2ยฐ/โ150 Sprint V 2ยฐ/โSuper 2ยฐ/โ200 Rally 2ยฐ/โP150S
suitable also for Vespa 125 V1-TS/โ150 VL-Super/โ180-200 Rally
a=15mm mm
steel, galvanized
fork M8
WURTH sealant based on silicone Super RTV with high torque capacity - 200ml
Content: 200 ml
Chemical base: Neutral curing silicones, oxime base
Odor/fragrance: Characteristic
Skinning time min: 5 min
Conditions for skinning time: compliant with ASTM D-4678
Full cure rate: 2 mm/g
Conditions for full cure: 23ยฐC and 50% relative humidity
Shore A hardness: 40
Tensile strength min.: 2.2 N/mmยฒ
Conditions for tensile strength: compliant with ASTM D-412
Conditions for maximum elongation at break: 300% / compliant with ASTM D-412
Thermal conductivity ฮป: 0.2 J/(m*s*K)
Conditions for thermal conductivity ฮป: in compliance with ASTM D-2214/70
Coefficient of thermal expansion: 0.0002 1/K
Conditions for coefficient of thermal expansion: compliant with ASTM EB-31
Dielectric strength: 16 kV/mm
Conditions for dielectric strength: compliant with ASTM D-149
Dielectric constant: 2.8
Conditions for dielectric constant: 1 MHz, ASTM D-150
Dissipation factor
Universal smartphone holder for Vespa complete with USB charging cable
Adjustable for all smartphone brands, CNC machined forged aluminum, black anodized
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5B1>2T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
450x110x240 mm
metal/plastic
gray
round, narrow
Polini Clutch Kit modification with 4 discs for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 90 V9A1T
Vespa 125 VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK
Racing clutch disc series with 4 discs and reinforced spring. The clutch discs have been improved with a new material that increases the friction coefficient to enhance grip under stress.
Pair of black Sport brake and clutch levers for Vespa 50/90/125 Primavera ET3-PX-PE-Sprint-GL-SS-GT
Vespa 50 V5A1T 885554 > 905288
Vespa 50 S V5SA1T 68088 > 74588
Vespa 50 Special V5B3T 69809 > 95877
Vespa 50 Special V5B3T 96378 > 146856
Vespa 50 Elestart V5B4T
Vespa 125 Primavera VMA2T 140507 > 172801
Vespa 125 Primavera ET3 VMB1T 3306 > 24054
Vespa 150 Super VBC1T 292116 > 356828
Painted in black
All models
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 SS V5SS1>2T
Vespa 90 V9A1T
Vespa 125 Primavera ET3
Inner diameter: 24 mm
Outer diameter: 30.5 mm
Thickness: 20 mm
Semi-curved Parmakit filter ร39 for PHVA/B-PHBN-PHBG-PHBL carburetors
Vespa 50/90/125/150/200
Filter dimensions: ร INNER A: ร39 - ร OUTER B: ร85 - HEIGHT C: 68 mm
Tin poster with central embossed image.
Dimensions 30x40 cm.
Brown color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Left/right rearview mirror for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Adjustable stem (Length 34 cm)
Thread: 8mm
Lower spring stop for adjustable front Bitubo shock absorber Vespa 50 N/L/R-Special-PK/90/125 Primavera ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
By clicking on purchase, all available sizes will be displayed
Thickness--> 1.5 mm
Vespa 50/90/125/150/180/200
round
ร 100 mm
chrome
bar length: 370mm
for handlebar tube/leg guard bracket, incl. bar and clamp ร 22mm
GFK
ivory
brown leather
Sizes: S:55-56cm / M:57-58cm / L:59-60 / XL:61-62
All models
8 mm
Plastic
Dell'Orto Sport PHBG ร 19 carburetor with manual choke for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Sport
ร 19 mm
engine connection: 24 mm
air filter connection: 19mm
main jet 85
idle jet 50
mixer tube AU262
needle W07
CRIMAZ clutch pressure plate with oil catcher for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125/150/200
The pressure plate is made from solid anticorodal aluminum with hard oxidation treatment. Designed
for all central spring/double central spring clutches, it has a
special shape that prevents the ring from coming out and directs oil onto
the clutch pack discs, improving their performance. Compatible with all clutch covers for smallframe Vespa.
Complete gear selector with double O-ring CRIMAZ for Vespa 50 N/L/R-Special-90 V9A1T-125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera VMA1T>2T
Vespa selector group with double seal and CRIMAZ mesh machined from solid
Bag/suitcase (large) as an alternative to the MOTO NOSTRA trunk 480x300x270mm
Thanks to its rain cover, it withstands all weather conditions and is therefore a perfectly adequate substitute for a conventional hard shell case.
Bag material: waxed canvas (water-repellent)
Leather straps with brass buckles and studs
Hidden underneath, practical snap closures
Snap lock with numeric code (the code can be set by the customer, factory set to '00')
Beautiful Moto Nostra lettering in vintage look
Side compartments with zipper
Includes rain cover
With carrying handle
Retro/Vintage look
Mounting with straps (part of the bag) on luggage rack / carrier
The bag is very easy to mount on the luggage rack or carrier with mounting straps attached (removable) to the bag. Also available in a large version with 35 liters of storage space (see "alternatives")
Bag/small suitcase as an alternative to MOTO NOSTRA top case 330x190x180mm
Thanks to its rain cover, it withstands all weather conditions and is therefore an absolutely adequate substitute for a conventional hard shell case.
Bag material: waxed canvas (water-repellent)
Leather straps with buckles and brass studs
Hidden underneath, practical snap closures
Snap lock with numeric code (the code can be set by the customer, factory set to '00')
Beautiful Moto Nostra lettering in vintage look
Side compartments with zipper
Includes rain cover
With carrying handle
Retro/Vintage look
Mounting with straps (part of the bag) on luggage rack / carrier
The bag is very easily mounted on the luggage rack or on a carrier with mounting straps attached (removable) to the bag. Also available in a large version with 35 liters of storage space (see "alternatives")
Black bag/small suitcase as an alternative to the MOTO NOSTRA trunk 330x190x180mm
Thanks to its rain cover, it withstands all weather conditions and is therefore a perfectly adequate substitute for a conventional hard shell case.
Bag material: waxed canvas (water-repellent)
Leather straps with buckles and brass studs
Hidden underneath, practical snap closures
Snap lock with numerical code (the code can be set by the customer, factory set to '00')
Beautiful Moto Nostra lettering in vintage look
Side compartments with zipper
Includes rain cover
With carrying handle
Retro/Vintage look
Mounting with straps (part of the bag) on luggage rack / carrier
The bag is very easily mounted on the luggage rack or on a carrier with mounting straps attached (removable) to the bag. Also available in a large version with 35 liters of storage space (see "alternatives")
All models
Vespa 50/80/90/125/150/160/180/200
All Vespa models
All models / Tutti i modelli
For tires 3.00x10, 3.50/10
Economy Version
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 SS V5SS1>2T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 90 SS V9SS1>2T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Oil canister support - luggage rack for inner shield right and left side -MRP- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, e.g. Sprint, V50, Primavera, VNB, VBB etc.
Powder-coated black steel, very stable design Incl. rubber with which you can e.g. attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
Engine Gasket KIT -BGM Pro silicone- including o-rings for Vespa 50/90/125 Primavera ET3-Special
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
RIPARO START outdoor cover in black polyester for scooter/vespa with top case and windshield
Note: For models with top box and windshield
Complete clutch Fabbri Racing for CIF- 12R "SUPER RACING" for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VESPA SMALL FRAME: VESPA 50-90-125 PRIMAVERA-ET3-PK-PK XL
APE 50
SETUP SPRING CHOICE:
->6 large springs: for touring engines 10/12 hp: using 6 springs makes the clutch lever operation more comfortable
->12 springs: for engines up to 25 hp: using 12 springs ensures slip resistance
->18 springs: for engines over 30 hp: adding 6 small springs (CIF ART. 5569-MF) inside the 6 large ones.
NB: with the use of 18 springs, it is suggested to use a clutch cover with a rack-and-pinion clutch release to make the clutch softer)
TECHNICAL SPECIFICATIONS:
The clutch is composed of:
->Clutch basket made from solid steel
->6 springs diameter mm.14 in harmonic steel
->6 springs diameter mm.10 in harmonic steel
->Spring holder and closure disc made in an innovative alloy used on all Fabbri Racing clutches. This alloy ensures the
Lamellar pack Quattrini engine crankcase "C1" for Vespa 50/90/125 Primavera ET3 / PK
Vespa 50/90/125 Primavera ET3 / PK
77x77x40 mm
incl. gaskets
4 valves without stop
Matte black aluminum tubeless VMC rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measure--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
Without Nuts
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Internal diameter: 20.5 mm
Gear with 10 engagements