RDV Scootershop
RDV > Spare Parts and Accessories > Engine and parts > Engine gaskets > Engine Gasket KIT -BGM Pro silicone- including o-rings for Vespa 50/90/125 Primavera ET3-Special
Engine Gasket KIT -BGM Pro silicone- including o-rings for Vespa 50/90/125 Primavera ET3-Special
Available
07-BV-326-IR

Engine Gasket KIT -BGM Pro silicone- including o-rings for Vespa 50/90/125 Primavera ET3-Special

Original reference: BGM1214

The BGM PRO silicone gasket kits consist of a high-quality gasket paper with a thickness of 0.5 mm (like the original "green" Piaggio). Additionally, the gaskets, which are always in contact with oil, already have a layer of silicone sealant applied. This results in a higher surface pressure of the gasket. Moreover, the silicone sealant seals the cold engine much better due to the permanently flexible sealing compound. This way, the engine remains tight, the oil stays in place, and it is beneficial.
Shipping time:

24/48 hours

1 point RDV = 2 cents 27 points RDV = 0,54 € cashback
27,96 €
22,92 € VAT excluded
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS

Request information

Do you have any questions? Request more information from the staff

I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required

Related articles

Liquid sealant/airtight
Available
Available
07-GY-001-CI
07-GY-001-CI

Liquid sealant/airtight

 
Shipping time
24/48 hours
7,99 €
6,55 € VAT excluded
1 point RDV = 2 cents 7 points RDV = 0,14 € cashback
-20% Complete piston 102cc from diameter 55 to diameter 55.8 for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL
Available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

By clicking on purchase, all available sizes will be displayed

Approfondisci
Shipping time
24/48 hours
43,43 € 54,29 €
35,60 € VAT excluded
1 point RDV = 2 cents 43 points RDV = 0,86 € cashback
Complete piston 75cc version 10 ports from diameter 47 to diameter 47.8 for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL
Available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

By clicking on purchase, all available sizes will be displayed

Approfondisci
Shipping time
24/48 hours
67,00 €
54,92 € VAT excluded
1 point RDV = 2 cents 67 points RDV = 1,34 € cashback
Mazzuchelli crankshaft Original version for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
low availability
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T

Vespa 50 PK (1st series)

technical specifications

rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone: 19 mm

Approfondisci
108,90 €
89,26 € VAT excluded
1 point RDV = 2 cents 108 points RDV = 2,16 € cashback
-24% Complete DR thermal group (75 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

Bore: 47
Stroke: 43
Number of transfers: 10

Approfondisci
Shipping time
24/48 hours
108,99 € 143,85 €
89,34 € VAT excluded
1 point RDV = 2 cents 108 points RDV = 2,16 € cashback
Primary transmission pair (Z 22x63) for Vespa 50 N/L/R-Special-90/125/​Primavera/​ET3/​PK50/125/​S/​XL/​N/HP-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

technical specifications

Z 22x63 with helical teeth
With shock absorbers

Approfondisci
Shipping time
24/48 hours
49,99 €
40,98 € VAT excluded
1 point RDV = 2 cents 49 points RDV = 0,98 € cashback
Complete piston 75cc from diameter 47 to diameter 47.8 for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL
Not available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

By clicking on purchase, all available sizes will be displayed
Note--> 3 transfers

Approfondisci
35,99 €
29,50 € VAT excluded
1 point RDV = 2 cents 35 points RDV = 0,70 € cashback
-25% Crankshaft Jasil Original version for Vespa 50 N/L/R-50 Special-50 PK 1st series
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T

Vespa 50 PK (1st series)

technical specifications

Roller cage included, stroke 43, small cone (19)

Approfondisci
Shipping time
24/48 hours
105,82 € 141,09 €
86,74 € VAT excluded
1 point RDV = 2 cents 105 points RDV = 2,10 € cashback
-25% Jasil crankshaft advanced version for Vespa 50 N/L/R-50 Special-50 PK 1st series-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T

Vespa 50 PK (1st series)

technical specifications

Roller cage included, stroke 43, small cone

Approfondisci
Shipping time
24/48 hours
112,63 € 150,17 €
92,32 € VAT excluded
1 point RDV = 2 cents 112 points RDV = 2,24 € cashback
-20% Polini For Race Crankshaft for Vespa 50 N/L/R-50 Special-50 PK 1st series-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T

Vespa 50 PK (1st series)

technical specifications

Roller cage included, stroke 43, small cone (19)

Approfondisci
Shipping time
24/48 hours
187,39 € 234,24 €
153,60 € VAT excluded
1 point RDV = 2 cents 187 points RDV = 3,74 € cashback
-12% TAMENI crankshaft original version for Vespa 50 N/L/R-50 Special-50 PK 1st series
low availability
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK (1st series)

technical specifications

Roller cage included
Stroke 43
Small cone

Approfondisci
110,00 € 125,00 €
90,16 € VAT excluded
1 point RDV = 2 cents 110 points RDV = 2,20 € cashback
-5% WURTH sealant based on silicone Super RTV with high torque capacity - 200ml
Available
technical specifications

Content: 200 ml
Chemical base: Neutral curing silicones, oxime base
Odor/fragrance: Characteristic
Skinning time min: 5 min
Conditions for skinning time: compliant with ASTM D-4678
Full cure rate: 2 mm/g
Conditions for full cure: 23°C and 50% relative humidity
Shore A hardness: 40
Tensile strength min.: 2.2 N/mm²
Conditions for tensile strength: compliant with ASTM D-412
Conditions for maximum elongation at break: 300% / compliant with ASTM D-412
Thermal conductivity λ: 0.2 J/(m*s*K)
Conditions for thermal conductivity λ: in compliance with ASTM D-2214/70
Coefficient of thermal expansion: 0.0002 1/K
Conditions for coefficient of thermal expansion: compliant with ASTM EB-31
Dielectric strength: 16 kV/mm
Conditions for dielectric strength: compliant with ASTM D-149
Dielectric constant: 2.8
Conditions for dielectric constant: 1 MHz, ASTM D-150
Dissipation factor

Approfondisci
Shipping time
24/48 hours
43,35 € 45,63 €
35,53 € VAT excluded
1 point RDV = 2 cents 43 points RDV = 0,86 € cashback
Crankshaft TNT Original version for Vespa 50 N/L/R-50 Special-50 PK 1st series-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T

Vespa 50 PK (1st series)

technical specifications

Roller cage included, stroke 43, small cone (19)

Approfondisci
Shipping time
24/48 hours
66,90 €
54,84 € VAT excluded
1 point RDV = 2 cents 66 points RDV = 1,32 € cashback
-16% Complete thermal group EVOK (75 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

Bore: 47
Stroke: 43

Approfondisci
Shipping time
24/48 hours
89,90 € 106,84 €
73,69 € VAT excluded
1 point RDV = 2 cents 89 points RDV = 1,78 € cashback
-20% Complete DR 90 cc piston from diameter 50 to diameter 50.8 for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL
Available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

By clicking on purchase, all available sizes will be displayed

Approfondisci
Shipping time
24/48 hours
43,43 € 54,29 €
35,60 € VAT excluded
1 point RDV = 2 cents 43 points RDV = 0,86 € cashback
-6% Complete thermal group VMC T-58 (114 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

VMC has designed this kit to provide a breath of fresh air compared to the competition. The T-58 is a cylinder with modern duct fluid dynamics designed to develop substantial torque from low and medium revs.

The perfect cylinder to revitalize Piaggio Ape and Vespa 50 engines 

High-quality perlitic cast iron thermal group kit of 114cc

For "short" stroke crankshafts 43 mm, Bore diameter 58mm, 6 transfers, Phases 124°-172°

Recommended squish 1.1~1.2mm, Compression ratio with squish at 1.2mm: 9.85:1

Exhaust outlet diameter 28mm, Exhaust stud distance 52mm

Aluminum cast head with long thread side spark plug

The kit includes 4 m6 Allen screws for better head fastening and 4 m7 studs specific for the cylinder

which eliminate the inconvenient fastening system typical of other short stroke cylinders for smallframe Vespa on the market.

Approfondisci
Shipping time
24/48 hours
160,00 € 170,00 €
131,15 € VAT excluded
1 point RDV = 2 cents 160 points RDV = 3,20 € cashback
-6% Original P&A crankshaft for Vespa 50 N/L/R-50 Special-50 PK 1st series-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK (1st series)

technical specifications

Roller cage included
Stroke 43
Small cone

Approfondisci
Shipping time
24/48 hours
79,90 € 85,00 €
65,49 € VAT excluded
1 point RDV = 2 cents 79 points RDV = 1,58 € cashback
-18% Complete aluminum thermal group VMC Type R (114 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
low availability
Compatibility

Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50

technical specifications

VMC has designed this kit to bring a breath of fresh air compared to the competition

The TYPE-R 58 is a cylinder with modern duct fluid dynamics designed to develop substantial torque already at low and medium revs

The perfect cylinder to liven up Piaggio Ape and Vespa 50 engines 

Thermal group kit in aluminum with high-quality Nikasil coating for a total displacement of 114cc

The kit fits on "short" stroke crankshafts 43 mm, bore diameter 58mm, 6 transfers, Phases approximately 124°-172°

Exhaust outlet diameter 28mm, Exhaust stud spacing 52mm

Cast aluminum head with side long-thread spark plug

The kit includes 4 m6 Allen screws for better head fastening and 4 m7 studs specific for the cylinder

which eliminate the inconvenient fastening system typical of other short-stroke cylinders for smallframe Vespa on the market.

Approfondisci
165,00 € 200,00 €
135,25 € VAT excluded
1 point RDV = 2 cents 165 points RDV = 3,30 € cashback