Vespa 125 PK Automatic VVM2T
Pinasco bearing crankshaft clutch side (17x47x14mm) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125
High-speed bearing with bakelite cage, reduced rolling friction, this ensures better fluidity and quietness of the engine, significantly increasing the number of revolutions.
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Dimensions: 20x47x14 mm (Flywheel side )
Malossi bearing crankshaft flywheel side tolerance C4 (20x47x14mm)
Vespa 50/90/125
Special precision bearings.
High-speed bearings with increased load, designed and tested for racing internal combustion engines.
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Dimensions: 20x47x14 mm
Cage in polyamide
Crankshaft bearing SKF flywheel side 20x47x14 mm (6204 TN9-C3) for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50 gear shaft wheel side for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso 1°-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3-PK
Dimensions: 20x47x14 mm
Cage in polyamide
Multifunction spray, lubricant and protective.
Thanks to its semi-fluid consistency, it penetrates the most difficult-to-reach areas, lubricating and protecting. Ideal for chains, hinges, and other metal components that require protection and lubrication. Its high resistance makes it ideal for bicycle and motorcycle chains with and without "O" rings.
Reinforced key kit Fabbri Racing for Vespa Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Reinforced Crimaz key kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Clutch key for Vespa 50/90/125/Primavera/ET3/PK50-Ape 50-125/S/XL-flywheel side GS 150-160
Vespa 50 V5A1T N,L,R (clutch side)
Vespa 50 Special V5A2>3T (clutch side)
Vespa 50 Special V5B1>4T (clutch side)
Vespa 90 V9A1T (clutch side)
Vespa 125 Primavera VMA1T>2T (clutch side)
Vespa 125 Primavera ET3 VMB1T (clutch side)
Vespa PK (clutch side)
Vespa 150 GS VS1T>5T (clutch and flywheel side)
Vespa 180 SS VSC1T
Measurements: 3x9.3mm
VMC steel key kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
1 VMC steel key 3.7x7x9.3
2 VMC steel key 3x15x13
Reinforced SS Crimaz spring for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125 Primavera ET3
Cross gear shift spring with balls for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125 Primavera ET3
PIAGGIO wheel rim in Aluminum color for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: M8 nuts and grover washers
M7 MD Racing nuts (4pcs) for VESPA stud bolts 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Special solid nuts for Vespa cylinder prisoners.
They have a height of 10mm compared to the 7mm of commercial ones.
Classic 11mm hexagon made from solid and a 13.8mm ring underneath to rest on a larger surface.
4 pieces
Preloaded washers M7 MD Racing (4pcs) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150 studs
Vespa 50
Vespa 125
Vespa 150
Special harmonic steel washer kit with preload
specifications to compensate the play of thermal excursions of Vespa cylinder studs.
These washers are completely compressed at 1.3kgm (tightening of Vespa studs)
and compensate for the loosening of studs subjected to heating.
Dimensions:
inner diameter 7.5mm
outer diameter 16.8
thickness 1.8mm
washer height at rest 2.18mm
excursion approximately 0.38mm
Optical group WITHOUT bulb holder for Vespa PK50-125 S/SS/ETS/XL
Vespa 50 PK SS (Abroad)
Vespa 80 PK S Automatic
Vespa 100 PK S Automatic
Vespa 125 PK S Automatic
Vespa 125 PK
Vespa 125 PK XL
Vespa 125 PK ETS VMS1T
Without lampshade holder but compatible with Original lampshade holder
Diameter: 135 mm
Removes contaminant deposits from: butterflies, mono injectors, E.G.R. valves, carburetors. Ideal for cleaning external and internal parts. Cleans without the need for disassembly.
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 yellow - Vespa Smallframe
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing
All models/All models
Stainless steel screw kit with hex head for fan cover mounting for Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Kit consisting of 3 Mx10 screws
Stator fixing screw M5x12 mm for Vespa 50/90/125 Primavera-Ape 50 ET3/PK50-125/S/XL/XL2/ETS
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
All models / Tutti i modelli
Vespa 50 PK/S/XL/N/HP/FL
Vespa 125 PK/S/XL/N/HP/FL
Vespa 125/150/200 PX/T5
Dimensions: 4.2x17mm rounded head
All models
Graft Hole: 5 mm
M10x1.25 mm front shock absorber nut upper for Vespa 50/125 PK/S/XL/N/HP/PX/T5/ET2/ET4/LX/LXV/S/GT/GTL/GTV/GTS-Ape 50
Vespa PK/S/XL/XL2 Automatic/PX/T5/ET2/ET4/LX/LXV/S/GT/GTL/GTV/GTS
oil tank sleeve for Vespa PX/T5
17mm wrench
steel, galvanized
Specifically designed for wire exchange
The brass pad does not mark the wire.
for VHSB/VHSC carburetor
for VHSB/VHSC carburetor
SIP PERFORMANCE 2.0 front shock absorber for Vespa 50/125 PX XL-N-HP
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 50 N Plurimatic V5P1T
Vespa 50 N Plurimatic V5P2T
Vespa 50 PK Automatica V5P2T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa PK 125 S Automatica VAM1T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 PK Automatica VVM2T
Vespa 125 N (FL) VMX7T
l=185 mm
aluminum
bodies: Silver
spring: black
spring preload: adjustable
tension adjustment: 18 levels
with ABE, KBA 91475
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
All Models / Tutti i modelli
Shield anchoring
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
FAR Vintage Classic Rearview Mirror – Left/Right Shield in Black Color
All Models
Anchoring to the shield
Vespa all models/All models