PIAGGIO carburetor bowl, for PHVA-PHVB carburetor for Vespa ET2/LX/LXV/S/Primavera/Sprint 50ccm 2T AC
Original reference: 484704
Vespa ET2/LX/LXV/S/Primavera/Sprint 50cc 2T AC
Related articles
Power Clutch Kit 2.0 forged 6 springs Pinasco for Vespa 125 VM1T/VM2T-VN1T-VN2T-VL-VB1T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Pinasco lamellar thermal group in aluminum (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
After the success of the first aluminum thermal unit for Vespa "Farobasso", Pinasco continued development in this field and is now pleased to present the new 160cc thermal unit for Vespa "Farobasso" / 5% cylinder reed valve. Perfectly
interchangeable with the original thermal unit, it keeps the aesthetics unchanged and substantially increases the vehicle's performance. Thanks to the reed valve intake, the "rejection" problems of classic "Piston Port" are eliminated, making the engine even more fun and enjoyable to ride. The power and torque increase
even further compared to the previous cylinder while maintaining reliability. The Pinasco 160cc Reed Valve thermal unit brings all Vespa 5% into modernity while retaining all the original components.
Attention: when using VM / VN / ACMA engine cases, the piston skirt must be shortened by approx. 3-4mm.
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 57 mm connecting rod 110-double cage
Attention--> Compatible with thermal groups in 57 stroke.
Shoulders--> 93 mm
Pinasco thermal group gasket kit (160 cc) for Vespa faro basso 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Complete DRT crankshaft stroke 60 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 60 mm connecting rod 110-double cage
Attention--> Compatible with thermal groups in 60 stroke.
Lamellar thermal group aluminum stroke (175 cc) for Vespa faro basso 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
This kit has been designed and developed for plug & play assembly, requiring no modifications to the engine casing. The power output is 21 HP at 7800 rpm and can reach up to 8500 rpm if properly configured.
In terms of performance and reliability, nothing to say, as this product has undergone 2 years of road testing and in the summer of 2019 traveled 10,000 km to and from Nord Kapp.
The kit is purely handcrafted, originating from sand castings strictly Made in Italy to provide those quality and reliability characteristics that distinguish it.
It can be installed on any type of low headlight casing with 3 studs from the year 1953 onwards. Having the short insertion neck in the casing, it requires no modifications. It requires the installation of a 60 stroke crankshaft, 110 rod.
The kit includes: head, cylinder, piston, reed valve pack, intake manifold, exhaust manifold, rubber sleeve for 24 PHBL carburetor, gaskets, and various bolts.
Complete Pinasco piston (Sel.B) for low headlight thermal group (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Complete crankshaft Falc Racing CCCorsa C57-110 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 57 mm connecting rod 110
Attention--> Compatible with thermal groups in stroke 57.
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 50/90/125/150/160/180/200
Coppia trasmissione primaria Pinasco ( Z22/65 ) per Vespa 125/150 VM-VN-VNA-VL-VB1-VBA
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Lamellar thermal group CCcorsa in aluminum (160 cc) for Vespa faro basso 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
This kit has been designed and studied for plug & play assembly,
it does not require any type of machining of the engine casing.
The power developed is 17 HP at 7000 rpm and reaches up to 8500 rpm if
correctly configured. In terms of performance and reliability
nothing to say, 2 years of road testing have been carried out on this product and in the summer of 2019 it covered 10000 km going to and returning
from Nord Kapp.
The kit's production is purely artisanal, coming from
sand castings strictly Made in Italy to provide those
qualities of quality and reliability that distinguish it. It can
be installed on any type of low headlight casing with 3
studs starting from the year 1953. Having the short insertion collar
in the casing, it does not require any machining. It requires the
installation of a 57 stroke crankshaft, 110 rod.
The kit includes: head, cylinder, piston, reed valve pack,
intake manifold, exhaust manifold, rubber sleeve for
24 PHBL carburetor, gaskets, and
Albero motore completo Falc Racing CCCorsa C60-110 per Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Larchotek Dolomiti lamellar thermal group in aluminum (187 cc) for Vespa low headlight 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
The LARCHOTEK Dolomiti 187 brings modern two-stroke engine technology into the world of classic Vespa Wideframe.
Thanks to the Ø63 mm bore, 60 mm stroke, and the reed valve intake directly on the cylinder, this thermal group allows for a generous displacement, high torque, and a wide range of use.
The Dolomiti 187 is not designed as an extreme cylinder in search of maximum performance, its goal is to offer a powerful, elastic, and pleasant-to-use road and touring engine: ready at low revs, progressive in delivery, and capable of comfortably handling even longer transmission ratios.
These features make it particularly suitable for Vespa Wideframe, which due to weight and gear ratio require an engine capable of developing good torque and maintaining it over a wide range of RPM.
The result is a more relaxed ride, with a quick throttle response and greater ease in overcoming climbs and challenging stretches.
The name Dolomiti perfectly encapsulates the philosophy of this project: an engine designed to tackle mountain roads, winding paths,
Complete crankshaft Larchotek Passo Rolle Signature C60-115 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
LARCHOTEK Passo Rolle Signature has been specially developed for powerful Vespa Wideframe engines and, in particular, for use with the LARCHOTEK Dolomiti cylinder kit of 187 cm³.
The Signature version also stands out for the use of a high-quality racing connecting rod.
Main features
Stroke of 60 mm and connecting rod of 115 mm
Cylinder -BGM PRO 150 cc, wide frame, Faro Basso, Ø=57mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA (from engine V55), VB1T, VGL1T, VL1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
BGM PRO cylinder with 150cc and 57 mm stroke suitable for all 2-channel engines. The grey cast iron cylinder has three transfer ports and is suitable for all wide frame engines with a 57 mm stroke. The cylinder with a 57 mm crankshaft also fits 125 cc engines with a 54 mm stroke without any issues. The third port of the cylinder is sealed with an aluminum spacer for the foot gasket, supplied, and the cylinder is evacuated via a corresponding cut in the piston. This means that no modifications to the engine housing are necessary.
Displacement: 150 cc
Stroke: 57 mm
Piston: Ø = 57 mm
Piston rings: 2 x 1.5 mm
Cylinder material: Cast iron
Cylinder head: CNC machined from solid aluminum with additional cooling fins at the bottom
Ports: 3
Spark plug: short thread (e.g., NGK B8HS, Bosch W3AC)
Ignition timing: 18-19°
The cylinder gives very old Vespas significantly more pulling power and top speed. Rapid acceleration, even by today's standards, is the specialty of the BGM PRO 150
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.
Stroke: 57 mm
Connecting rod length: 110 mm
Piston pin: Ø15 mm
Connecting rod bearing: needle bearing (upper and lower)
One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.
The balance factor has been improved, among other things, thanks to a hollow crank pin.
The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155
Vespa 50/90/125/150/160/180/200