Outer diameter: 150 mm
Thickness: 24 mm
Color: Orange
Material: Aluminum

The LED projector has a brightness three times higher than an original PX optical group (1300 lumens). The power consumption is only 20 W. This corresponds to the luminous efficiency of a conventional 100 Watt spotlight.

Allows mounting an ignition with cone 20 on a cone 19 shaft.

It mounts in place of the original lamp holder. Red LEDs, no battery needed (works in AC and DC both at 6v and 12v)

Evok Iron Led Rear Light 22 Led Plug&Play

Evok Iron Led Headlight for Vespa GL-Sprint-180 SSThe headlight for Vespa GL-Sprint-180 SS has been designed and manufactured specifically for the handlebars of the Vespa GL-Sprint-180 SS.It mounts Plug&Play using the connectors of the original headlight and works with both alternating and direct current.The cable colors match the colors of the original system.The headlight has two light combinations:- Low beam and position- Low beam, high beam, and position

3 angel eyes lenses with conversion circuit and anti-flicker

Complete with small parts and finial.

The EVOK IRON BRAKE shoes are made of a special aluminum
magnesium alloy, with special friction material containing metallic fibers
that enhance its resistance properties, asbestos-free according to the new
CEE regulations. The new EVOK compound offers
characteristics that are greatly superior to the average and excellent
noise reduction characteristics, ensuring modular and
progressive braking, shorter braking distances, and extremely limited
friction material wear.

Made in Italy

Made in Italy

Pair of front LED arrows 12 Volt. Plug & play product. Only the chips are provided, original lenses required. Product not approved, for track use only.

Pair of rear LED indicators 12 Volt. Plug & play product. Only the chips are provided, original lenses are required. Non-approved product, for track use only.

Pair of front LED arrows 12 Volt. Plug & play product. Only the chips are provided, original lenses required. Not approved product, for track use only.

Pair of rear LED arrows 12 Volt. Plug & play product. Only the chips are provided, original lenses required. Product not approved, for track use only.

Pair of front LED arrows 12 Volt. Plug & play product. Only the chips are provided, original lenses are required. Product not approved, for track use only.

Pair of rear LED arrows 12 Volt. Plug & play product. Only the chips are provided, original lenses required. Product not approved, for track use only.

Features: 22 LEDs

Reinforced 4-speed EVOK gear cross for Piaggio Vespa 50-90-125 Primavera, ET3, PK50-125 FL HP FL2.- Rounded angle

Evok Iron Led Headlight for Vespa 50cc N/L/RIl
the headlight comes with a special proprietary voltage converter
that makes installation simple and Plug & Play, as well
as providing an anti-flicker function for the headlight. The light has two light combinations:- Low beam and DRL position;- Low beam, high beam, and DRL position.

TECHNICAL FEATURES

Package contents:- Evok Iron Led Headlight- Proprietary voltage converter- Installation instructions and warrantyTechnical features of the complete front Evok Iron Led Headlight:- 12 Volt;- 25 Watt;- 2.4 Amp;- Up to 7000 Lm power;- 6000K Led (Cool white light);- Ø112mm overall diameter.

Package contents:- Evok Iron Led Headlight- Proprietary voltage converter- Installation instructions and warrantyTechnical characteristics of the complete Evok Iron Led front headlight:- 12 Volts;- 25 Watts;- 2.4 Amp;- Up to 7000 Lm power;- 6000K Led (Cool white light);- Ø139mm overall diameter.

Faro Evok Iron Led for Piaggio Piaggio CiaoThe
headlight for Piaggio Ciao is mounted Plug&Play using the connectors
of the original headlight and works with both alternating and direct current. The cable colors match the colors of the original system. The headlight has two light combinations: - Low beam and position - Low beam, high beam, and position

Evok Iron Led Headlight for Piaggio Piaggio SI FL2
The headlight for Piaggio SI FL2 is mounted Plug&Play using the connectors
of the original headlight and works with both alternating and direct current. The cable colors match the colors of the original system. The headlight has two light combinations: - Low beam and position - Low beam, high beam, and position

cast iron
2 transfers
Ø 55.0mm
stroke 51mm
connecting rod: 97.0mm
2 piston rings
without cylinder head

Clutch bell machined from solid complete with springs and primary 72 teeth, compatible with 23, 24, and 25 teeth pinion. Shock absorbers machined from solid.

Clutch bell machined from solid complete with springs and primary 69 teeth, compatible with pinion 26 and 28 teeth. Shock absorbers machined from solid.

WHERE PERFORMANCE BEGINS
The EVOK IRON CLUTCH KIT VESPA SMALL FRAME ensures a significant improvement in resistance to stress for engines up to 35 HP. Tested and approved at the RABBIT 24H ENDURANCE 2023. Thanks to the experience gained over the years in the motorcycle sector, EVOK has developed a range of products that stand out for reliability and quality. EVOK is the bridge between the original spare part and performance, with a range of spare parts that guarantee a step of technical or aesthetic improvement. OUR DNA: - Pioneers of Soft Tuning - Performance - Quality - Plug and Play Products. The important work in the research and development sector is reflected in all product categories, always updated and keeping up with the times, EVOK develops its offer focusing on the Italian and European market. All EVOK components are subjected to accurate quality controls, from production to packaging.

TECHNICAL FEATURES

The EVOK IRON CLUTCH KIT VESPA SMALL FRAME consists of: - 4 Sintered EVOK Discs (Spare part code 100288800) - 3 EVOK Aluminum Driven Discs - 8 Reinforced EVOK Springs - Internal

Electronic ignition EVOK with variable advance cone Ø20mm. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the flywheel weights are machined from solid and are perfectly balanced and zinc-plated. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - Flywheel 1400g - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - Flywheel puller 28x1 mm - Coil fixing plate - Spark plug cap - Hardware kit 7 sales plus - Plug and play, everything necessary for assembly is included - Excellent quality and reliability over time - Return and extended warranty up to 24 months - 24-hour Whatsapp hotline for assistance and specific adjustment consultation upon request - Fan color gray as original to avoid issues during revision or historical register registration - Inclination marks for advance adjustment - Rotor about 1.4kg, for +30% extension.

EVOK electronic ignition with variable advance cone Ø19mm. Thanks to the enlarged cooling fan, the airflow for cooling is 25% higher than the original fan. The rivets applied during the assembly phase of the flywheel are reinforced and ensure exceptional reliability, the weights of the same are made from solid and are perfectly balanced and zinc-coated. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for installation.

- Flywheel 1400g - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - Flywheel extractor 28x1 mm - Coil fixing plate - Spark plug cap - Kit hardware

7 sales plus - Plug and play, everything necessary for installation is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour WhatsApp toll-free number for assistance and consultation for specific adjustments upon request - Fan color gray as original to avoid issues during revision or historical register registration - Inclination notches for advance registration - Rotor approximately 1.4kg, for +30% extension.

Each kit is equipped with everything needed for assembly- Flywheel 1400g- Upgraded cooling fan- 4-pole stator- Graduated stator plate- Ignition coil- Voltage regulator- Flywheel puller 28x1 mm- Coil fixing plate- Spark plug cap- Small parts kit

Dimensions: 90x140 mm

In addition to the base version, we have added our proprietary voltage
converter that optimizes the operation of the headlight even without
the use of a battery.

Technical features of the Complete Front Headlight Evok Iron Led:- 12 Volts;- 25 Watts;- 3000 Lm power;- 6500K Led (Cold white light);- Specific shape for 50 Special. Installation is carried out respecting the colors of the original system.

Package contents:

- Evok Iron Led Headlight
- Proprietary voltage converter
- Assembly instructions and warranty

Technical features of the complete front Evok Iron Led Headlight:
- 12 Volts;
- 25 Watts;
- 2.4 Amp;
- Up to 7000 Lm of power;
- 6000K Led (Cold white light);
- Ø139mm overall diameter.

Alesaggio: 47
Corsa : 43