Albero motore completo Falc Racing CCCorsa C60-110 per Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Related articles
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Including OR'ing
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Pinasco lamellar thermal group in aluminum (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
After the success of the first aluminum thermal unit for Vespa "Farobasso", Pinasco continued development in this field and is now pleased to present the new 160cc thermal unit for Vespa "Farobasso" / 5% cylinder reed valve. Perfectly
interchangeable with the original thermal unit, it keeps the aesthetics unchanged and substantially increases the vehicle's performance. Thanks to the reed valve intake, the "rejection" problems of classic "Piston Port" are eliminated, making the engine even more fun and enjoyable to ride. The power and torque increase
even further compared to the previous cylinder while maintaining reliability. The Pinasco 160cc Reed Valve thermal unit brings all Vespa 5% into modernity while retaining all the original components.
Attention: when using VM / VN / ACMA engine cases, the piston skirt must be shortened by approx. 3-4mm.
Pinasco carburetor d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for assembly, including a specific foam air filter that fits perfectly in the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
NTN crankshaft bearing for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm, polyamide cage
Lamellar thermal group CCcorsa in aluminum (160 cc) for Vespa faro basso 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
This kit has been designed and studied for plug & play assembly,
it does not require any type of machining of the engine casing.
The power developed is 17 HP at 7000 rpm and reaches up to 8500 rpm if
correctly configured. In terms of performance and reliability
nothing to say, 2 years of road testing have been carried out on this product and in the summer of 2019 it covered 10000 km going to and returning
from Nord Kapp.
The kit's production is purely artisanal, coming from
sand castings strictly Made in Italy to provide those
qualities of quality and reliability that distinguish it. It can
be installed on any type of low headlight casing with 3
studs starting from the year 1953. Having the short insertion collar
in the casing, it does not require any machining. It requires the
installation of a 57 stroke crankshaft, 110 rod.
The kit includes: head, cylinder, piston, reed valve pack,
intake manifold, exhaust manifold, rubber sleeve for
24 PHBL carburetor, gaskets, and
Pinasco thermal group gasket kit (160 cc) for Vespa faro basso 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Pinasco carburetor filter d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Piaggio Bearing Crankshaft 25X62X12 mm (C4) for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 V30-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Flywheel side for Vespa 125 V30-TS 1°/150 VL-Super 1°
Measurements: 25x62x12 mm
Lamellar thermal group aluminum stroke (175 cc) for Vespa faro basso 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
This kit has been designed and developed for plug & play assembly, requiring no modifications to the engine casing. The power output is 21 HP at 7800 rpm and can reach up to 8500 rpm if properly configured.
In terms of performance and reliability, nothing to say, as this product has undergone 2 years of road testing and in the summer of 2019 traveled 10,000 km to and from Nord Kapp.
The kit is purely handcrafted, originating from sand castings strictly Made in Italy to provide those quality and reliability characteristics that distinguish it.
It can be installed on any type of low headlight casing with 3 studs from the year 1953 onwards. Having the short insertion neck in the casing, it requires no modifications. It requires the installation of a 60 stroke crankshaft, 110 rod.
The kit includes: head, cylinder, piston, reed valve pack, intake manifold, exhaust manifold, rubber sleeve for 24 PHBL carburetor, gaskets, and various bolts.
Carburetor sleeve Pinasco d.22 for Vespa low light 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for installation, including a specific foam air filter that fits perfectly into the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
Size: 28x36mm
Complete Pinasco piston (Sel.B) for low headlight thermal group (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Sip Premium Bearing Crankshaft 25X62X12 mm (C4) for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 V30-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Flywheel side for Vespa 125 V30-TS 1°/150 VL-Super 1°
Measurements: 25x62x12 mm
High Carbon Chrome Steel
reinforced, made in Japan, C4
9 balls
PIAGGIO carburetor bowl, for PHVA-PHVB carburetor for Vespa ET2/LX/LXV/S/Primavera/Sprint 50ccm 2T AC
Vespa ET2/LX/LXV/S/Primavera/Sprint 50cc 2T AC
Nadella Bearing Crankshaft for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Main feature: Polyamide cage that reduces ball friction
Pinasco aluminum thermal group (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Notes-->5 decantings
High-speed crankshaft bearing kit Pinasco for Vespa 125/150 VM-VN-VNA-VNB-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm 2 pieces
Pinasco high-speed crankshaft bearing (oversized +0.04mm) for Vespa 125/150 VM-VN-VNA-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Pinasco carburetor d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for assembly, including a specific sponge air filter that fits perfectly in the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
PTFE Oil Seal for Crankshaft Falc Racing CCCorsa for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Larchotek Dolomiti lamellar thermal group in aluminum (187 cc) for Vespa low headlight 125/150 VM-VN-VL-VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
The LARCHOTEK Dolomiti 187 brings modern two-stroke engine technology into the world of classic Vespa Wideframe.
Thanks to the Ø63 mm bore, 60 mm stroke, and the reed valve intake directly on the cylinder, this thermal group allows for a generous displacement, high torque, and a wide range of use.
The Dolomiti 187 is not designed as an extreme cylinder in search of maximum performance, its goal is to offer a powerful, elastic, and pleasant-to-use road and touring engine: ready at low revs, progressive in delivery, and capable of comfortably handling even longer transmission ratios.
These features make it particularly suitable for Vespa Wideframe, which due to weight and gear ratio require an engine capable of developing good torque and maintaining it over a wide range of RPM.
The result is a more relaxed ride, with a quick throttle response and greater ease in overcoming climbs and challenging stretches.
The name Dolomiti perfectly encapsulates the philosophy of this project: an engine designed to tackle mountain roads, winding paths,
Cylinder -BGM PRO 150 cc, wide frame, Faro Basso, Ø=57mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA (from engine V55), VB1T, VGL1T, VL1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
BGM PRO cylinder with 150cc and 57 mm stroke suitable for all 2-channel engines. The grey cast iron cylinder has three transfer ports and is suitable for all wide frame engines with a 57 mm stroke. The cylinder with a 57 mm crankshaft also fits 125 cc engines with a 54 mm stroke without any issues. The third port of the cylinder is sealed with an aluminum spacer for the foot gasket, supplied, and the cylinder is evacuated via a corresponding cut in the piston. This means that no modifications to the engine housing are necessary.
Displacement: 150 cc
Stroke: 57 mm
Piston: Ø = 57 mm
Piston rings: 2 x 1.5 mm
Cylinder material: Cast iron
Cylinder head: CNC machined from solid aluminum with additional cooling fins at the bottom
Ports: 3
Spark plug: short thread (e.g., NGK B8HS, Bosch W3AC)
Ignition timing: 18-19°
The cylinder gives very old Vespas significantly more pulling power and top speed. Rapid acceleration, even by today's standards, is the specialty of the BGM PRO 150