Vespa P 200 E VSX1T
SKF wheel hub bearing 6204-C5 20x47x14 mm for Vespa 50/90/125/150/200
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Vespa 150 GS VS5T
Vespa 150 VB1T
Vespa 180 Rally VSD1T
Vespa PX/PE
Measurements: 20x47x14 mm
Needle roller bearing kit for multiple gear shaft for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/180-200 Rally/PX125-200/PE/Lusso/Cosa/T5
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 125 PX VNX1>2T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
2x11.8 mm
21 pieces
SKF bearing 6302-C3 15x42x13 multiple gear (shock absorber) for Vespa 125 GT/Super 2°/150 Sprint/Super/PX125-150X 2°/PX125-150 E/Lusso/'98/MY/'11/Cosa 125-150 1/2-LML Star 125-200 2T/4T
Vespa 125/150
Vespa 125 T5 VNX5T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Vespa 200 Cosa 1/2
Dimensions: 15x42x13
Roller bearing gearbox shaft 28x35x13 mm for Vespa 125 GT 2°/GTR/Super 2°/TS/150 GL 2°/Sprint 2°/V/Super 2°/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Super VNC1T 024900>
Vespa 125 GT VNL1T 60900>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 PX T5
Vespa 150 Super VBC1T 70200>
Vespa 150 Sprint VLB1T 73900>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Measurements: 28x35x13 mm
Nadella roller bearing flywheel side 25X38X15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
Measurements: 25X38X15
Nadella Bearing Crankshaft for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm
Polini HT FOR RACE Z 23 clutch for primary Z65 helical teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
The Polini "HT Clutch for Race" is an innovative racing clutch, designed for the most demanding riders. Designed for Vespa Largeframe, it offers exceptional performance thanks to advanced technologies.
Main features:
-Reduced mass on the crankshaft and numerous adjustment options.
-Suitable for high torque.
-Lightweight aluminum construction to improve performance.
-Needle bearing to reduce friction and improve shifting.
-Aluminum friction discs to optimize grip and power transmission.
Gas valve cable SI 20/20-24/24 carburetors for Vespa 125/150/180/200 Sprint V-PX-TS-GT-GTR-Rally
Vespa 125/150 Sprint V-PX-TS-PE-GT-GTR-Rally
For models without a mixer
Insulating cap Low voltage socket for Vespa P125-150X/S/P200E/PX80-200 E/Lusso/Cosa/T5
Vespa PX
Vespa PE
Black rubber central mat for Vespa 80/125/150/200 PX-PE 1st series
Vespa 80 PX V8X1T> 100000
Vespa 125 PX VNX1T>2T>200000
Vespa 150 PX VLX1T> 600000
Vespa 200 PE VSX1T> 300000
Fuel tank cap with lock for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All except 125 primavera -ET3
All models / Tutti i modelli
All models / Tutti i modelli
chrome
l=85 mm
Ø internal 21mm
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
VMC EXPLORER 244cc Thermal Group Ø 72mm CENTRAL SPARK PLUG
Conversion kit for engines: Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
7-port aluminum cylinder, shell moulding technology, nickel-silicon treated liner
Bore 72 mm, Stroke 60mm, Connecting rod 126mm (quattrini shafts) or 127mm (Sip shafts)
Total displacement 244 cc, Main Transfer Phases: ~ 120° Exhaust: ~ 178°
Recessed head with silicone Oring gasket and 8 fastening points to the cylinder
Steel exhaust manifold with silicone Oring gasket fixed to the cylinder with specific bracket and 4 screws
The cylinder features a sleeve of about 8mm that allows proper guidance to the piston even if mounted with a stroke of 62 and 64 mm
The sleeve has a larger external diameter compared to the original cylinders
and requires boring the crankcase inlet to 76mm for 8mm of
depth.
To perform this task manually, a steel base/guide is provided to be screwed to the crankcases <
Spark plug cap for Vespa V1/V15/V30/VM/VN/VL/VB1T/VNB/VBB/GL/PX/Sprint/Rally
Vespa 98
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Vespa PX
Vespa PE
Cone pin clip of Orto MA/UA/UB23S3 for Vespa 125 VNA/150 VB/VL/GS
Trolley extension for motorcycle mover (rear wheel) -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
Vespa Smallframe, largeframe, wideframe
Brilliant extension for maneuvering assistance by BGM PRO for all classic
Vespa and Lambretta scooters. With the addition for the rear wheel, the
vehicle can be turned on the spot. This way, the scooter can be stored
well and safely even in the smallest corner and can be easily removed
again. All this without any effort.
Grease Gun -NORMFEST- Lever grease gun for 400g or 500g cartridges and bulk grease
Vespa PX (all)
Vespa PE (all)
In black rubber Fixing: Adhesive
Complete silent block with steel tube for Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Silent block--> 35x30x14mm
Tube--> 44x15x9.3mm
Elastic support for shock absorber for Vespa 50/90/125/150/200 PX-PE-Sprint-GT-GTR-TS
Vespa 50, Vespa 90, Vespa 125 from 1958, Vespa 150 from 1958 (excluding Vespa 150 GS), Vespa 160, Vespa 180, Vespa 200
Rivet setting tool set Ø=2mm, 3mm, 4mm, 5mm, 6mm for rivets according to DIN 660
Cable grommet on the body side glove box/left hood for Vespa 125 Primavera ET3/PX-150 PX-200PE-Arcobaleno
Vespa 125 Primavera ET3 VMB1T
Engine wheel oil seal kit ø 27 in FKM plus PTFE for Vespa 125/150/200 PX-TS-GTR-Sprint Veloce
Vespa PX 80 E V8X1T >100000
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139 >
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >87953
Vespa 150 Super 412374 >
Vespa 150 PX VLX1T >455339
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 200 RALLY 0033997 >
Vespa 200 PE >153347
Rear hub oil seal: 27
Gasket between the rear right/left indicator and light body for Vespa 80/125/150/200 PX-PE
Vespa PX 80 E Rainbow
Vespa PX 80
Vespa PX 100
Vespa PX 100 E Rainbow
Vespa P 125 X
Vespa P 125 X E
Vespa PX 125 E Rainbow
Vespa P 125/ETS
Vespa PX 125/TS
Vespa P 150 X
Vespa PX 150 E
Vespa PX 150 E Rainbow
Vespa P 200 E
Vespa PX 200 E
Vespa PX 200 E Rainbow
Front gasket 108 Project between indicator and light body DX/SX for Vespa PX80-200/PE/Lusso/T5 Classic
Vespa PX 80
Vespa PX 80 E Arcobaleno
Vespa PX 100
Vespa PX 100 Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Arcobaleno
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Arcobaleno
Vespa P 200 E
Vespa P 200 E Arcobaleno
Vespa 125 PK S VAM1T Automatic
Front Siem gasket between indicator and shield DX/SX for Vespa PX80-200/PE/Lusso/T5 Classic
Vespa PX 80
Vespa PX 80 E Rainbow
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Rainbow
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Rainbow
Vespa P 200 E
Vespa P 200 E Rainbow
Vespa 125 PK S VAM1T Automatic
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Vespa 50 V5A1T 236001>283299
Vespa 50 V5A1T 580001>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>2T
Vespa 50 Special V5B3T>207316
Vespa 50 Special V5B4T
Vespa 50 V5SA1T 34201> V5SS2T
Vespa 90 V9A1T 31301>
Vespa 90 V9SS2T
Vespa 125 GT 62685>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA2T 028960>
Vespa 125 Primavera ET3 VMB1T > 44965
Vespa 150 Super VBC1T 73780>
Vespa 150 Sprint VLB1T 077175
Long model with 4 mm guide
Brand: Zadi
Metal keys
Vespa PX80/125/150/200/PE/MY/T5
SIP disc brake master cylinder for Vespa PX`98/MY/`11 adaptable to other models
Vespa 125/150/200 PX`98/MY/`11
Adaptable to all other models (requires creating plates for mounting)
Pinasco airbox purifier cover with MIX for Vespa Vespa 180-200 Rally/P80 -150X/P200E/PX80-200E/Lusso /`98/MY/`11/T5
Vespa 150 PX VLX1T
Vespa 200 Rally VSE1T Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
In plastic, 20% more volume, suitable for models WITH mixer
Flywheel puller tool SIP M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Size: 28x1
All models
Practical packaging with reduced dimensions, essential for on-the-road repairs.
The kit contains:
1 Long nose pliers
1 Wire cutter
1 Flathead screwdriver
1 Phillips screwdriver
1 Bit holder
10 Bits
1 Extension
7 Sockets (11/10/9/8/7/6/5 mm)
5 Wrenches (6/5/4/3/2 mm)
Transparent windshield Faco for Vespa 50 PK-125 PK-125-150-200 PX-PE-Rally-TS-Sprint
Vespa PX
Vespa PE
Vespa PK
Vespa 180/200 Rally
Included: Brackets, screws, and assembly instructions
Dimensions--> L 500, H 540 mm
Pair of black grips with Malossi MHR BLACK logo for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The new Malossi MHR grips aim for a trio of elements: design-Safety-comfort.
Every detail has been designed and defined based on these three elements, essential for an aggressive design, secure grip, and comfort while riding.
In particular, the design favors vibration absorption, the dimensions make the grip secure and manageable, and the ergonomic structure allows the palm to rest without inflaming the forearm.
The Malossi MHR BLACK grips are made with a thermoplastic rubber with high mechanical characteristics and excellent heat resistance, the result of extensive research aimed at selecting special polymers with high elasticity and soft touch. This material ensures the MHR BLACK grips' resistance in all usage conditions and, consequently, great durability. Finally, the soft touch conveys a sensation of pleasure and comfort to the user.
Rollbar tube reinforcement 360 Project Garage 2.1 for Vespa 50 V5A1T L/R-Special V5A2>3T/V5B1>4T-90 V9A1T/125 Primavera ET3- 50/125 PK-S-XL-N-HP-FL-80/125/150/160/180/200 PX-PE-Sprint-TS-GL-Rally-VNB-VBB
Vespa 50 V5A1T L/R-Special V5A2>3T/V5B1>4T-90 V9A1T/125 Primavera ET3 Vespa 50/125 PK-S-XL-N-HP-FL
Vespa 80/125/150/160/180/200 PX-PE-Sprint-TS-GL-Rally-VNB-VBB
Reinforcement bar for Vespa Smallframe Frame 2.1 360 PG CNC
Specific reinforcement bar for the Vespa Smallframe frame, designed to improve structural rigidity while maintaining the correct elasticity of the frame.
The 360 PG CNC bar allows for adjusting the tension or compression of the frame cradle, enabling you to adapt the reinforcement to your needs without compromising the structure's flexibility.
Installation is done via front fastening in the holes intended for the spare wheel support and rear fastening at the height of the bag hook.
Finish and materials: Polished steel and CNC machined aluminum
WARNING: For the rear fastening, 2 holes must be made on the frame.
Clutch cover OR ring for Vespa 125 VM/VN/VNA/VNB/VBB/Sprint/GT/GTR/TS/VL-Super/160 GS/180 SS/Rally/PX80-200/PE
Vespa 125 1953>
Vespa 150 1954>
Vespa 160
Vespa 180
Vespa 200
Ring OR clutch cover for Vespa 125 VM/VN/VNA/VNB/VBB/Sprint/GT/GTR/TS/VL-Super/160 GS/180 SS/Rally/PX80-200/PE
Vespa 125 1953>
Vespa 150 1954>
Vespa 160
Vespa 180
Vespa 200