Vespa 150 VB1T
Multifunction spray, lubricant and protective.
Thanks to its semi-fluid consistency, it penetrates the most difficult-to-reach areas, lubricating and protecting. Ideal for chains, hinges, and other metal components that require protection and lubrication. Its high resistance makes it ideal for bicycle and motorcycle chains with and without "O" rings.
8 mm
Wheel rim tightening
M7 MD Racing nuts (4pcs) for VESPA stud bolts 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Special solid nuts for Vespa cylinder prisoners.
They have a height of 10mm compared to the 7mm of commercial ones.
Classic 11mm hexagon made from solid and a 13.8mm ring underneath to rest on a larger surface.
4 pieces
Preloaded washers M7 MD Racing (4pcs) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150 studs
Vespa 50
Vespa 125
Vespa 150
Special harmonic steel washer kit with preload
specifications to compensate the play of thermal excursions of Vespa cylinder studs.
These washers are completely compressed at 1.3kgm (tightening of Vespa studs)
and compensate for the loosening of studs subjected to heating.
Dimensions:
inner diameter 7.5mm
outer diameter 16.8
thickness 1.8mm
washer height at rest 2.18mm
excursion approximately 0.38mm
Removes contaminant deposits from: butterflies, mono injectors, E.G.R. valves, carburetors. Ideal for cleaning external and internal parts. Cleans without the need for disassembly.
All models/All models
Parabola with lamp holder (diam. 115 mm) for Vespa 150 GS/VB1T/VBA1T
Vespa 150 VS1T> VS5T>87589
Vespa 150 VBA1T>110485
Vespa 150 VB1T
Stainless steel screw kit with hex head for fan cover mounting for Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Kit consisting of 3 Mx10 screws
Complete Newfren clutch for Vespa 125 VN1T 06001 ->/ VNA2T 081468/ACMA/150 VL1-3T/VB1T/VD1-2T/VGL1T
Vespa 125 VN1T 06001>
Vespa 125 VN2T
Vespa 125 VNA1T
Vespa 150 VNA2T> 081486
Vespa 150 VL1>3T
Vespa 150 VB1T
3 plated discs, 3 metal ones, 6 springs
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
All models / Tutti i modelli
Chrome full wheel Made in Italy for Vespa 98/125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Included: M8 Nuts (11 mm wrench) and washers Finish: Chrome
Size: 3.50/8
All models
Graft Hole: 5 mm
Right hood hook lever for Vespa 125/150 V1-V30>V33-U-VM-VN-VB-VL
Vespa 125/150 V1-V30>V33-U-VM-VN-VB-VL
Specifically designed for wire exchange
The brass pad does not mark the wire.
Light switch for Vespa 125 VNA1>2T/125 VNB1>2T/150 VB1T/150 VBA1T> 76049
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 150 VB1T
Vespa 150 VBA1T> 76049
3 positions
Chrome cover
for VHSB/VHSC carburetor
Vespa 125 VN1>VN2T
Vespa 150 VL1>VL3T
Vespa 150 VB1T
Vespa 150 GL VGL1T (Foreign)
Finish: Burnished
Zinc Plated Blind Rivet Nut Kit for Saddle and Luggage Rack Mounting
Vespa 150 VL1T>3T
Vespa 150 VB1T
Measurements: M 8 with a 14 mm wrench
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
In galvanized metal
countersunk washer luggage rack Vespa 125 V30>33T Vespa 125 VM1>2T Vespa 125 VN1>2T Vespa 150 VL1>3T Vespa 150 VB1T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Finish: Burnished
for VHSB/VHSC carburetor
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
All Models / Tutti i modelli
Shield anchoring
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
FAR Vintage Classic Rearview Mirror – Left/Right Shield in Black Color
All Models
Anchoring to the shield
Vespa all models/All models
Reinforced external Evok capacitor for contact point ignition Piaggio Vespa/Ciao/Lambretta
Models with contact point ignition
Thanks to the experience gained over the years in the motorcycle sector, EVOK has developed a range of products that stand out for their reliability and quality.
Vespa 125 VNB1T > VNB6T
Vespa 150 VL1T > VL3T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 VB1T
Vespa 150 GS VS1T > VS5T
Vespa 160 GS VSB1T
Thickness: 4 mm
Service Station Manual for Vespa 50-125/PV/ET3125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally
Vespa 50/90/125/150/160/180/200
Cooling spray -WEICON- 400ml for quick installation of ball bearings
All models
Weicon COLD SPRAY, 400ml, ideal for quick installation of ball bearings.
WEICON Cold Spray is versatile and suitable for troubleshooting in the field of electronics and for repairs in the industrial sector.
Metal components such as ball bearings, bushings, chain links, shafts, etc. can be inserted into the tightest of fits with WEICON COLD SPRAY
Vespa 125 VN2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 GLVGL1T Acma
Vespa 50/90/125/150/200 PX-Special