Vespa 125 ETS VMS1T
Kickstand spring attachment plate for Vespa V50/โPV/โET3/โ160GS/โ180SS/โPX/โT5
All Models
Galvanized Finish
Spacer buffer for fender mounting premium version ร 18x6.4x5 mm for Vespa 50/90/125/150/200
All models - Tutti i modelli
Kit 5pcs elastic safety washer rim SIP (tubeless) M8 mm ร 13.5x8.7 mm (thickness): 2.5mm, type NLX8, NORD-LOCK for SIP tubeless rims
Vespa 50/80/90/125/150/160/180/200
Dexter Modern Box 4.0 Muffler (28 mm exhaust) for Vespa PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified PK / HP Padellino โ Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
โ
Technical Features
-Available with an internal diameter collector of 28 mm or 32 mm
-Lower noise than a Proma
-Original-like aesthetics (modern padellino style)
-Excellent torque to make the most of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with tires 3.00 R10 and 90/90 R10
-Slightly shorter collector compared to the Classic Box to avoid interference with the partition (further shorten-able if necessary
Complete thermal group Quattrini M-200-S 67x56.5 (200cc) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
In Aluminum, 6 ports.
ร 67.0mm
Stroke 56.5mm
Head with central spark plug
Recommended spark plug: NGK BR9ECM
Recommended ignition timing: 17ยฐ
Intake manifold 35 mm
4-petal reed valve
EVOK clutch plate with 30mm bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Reinforced gear shift rod screw for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/PV/ET3/PK50 -125/S/XL/XL2
Ref.Orig: 098787
Reinforced model
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Couple of G piston pin stops Polini for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
FB 36 clutch spring kit Fabbri Racing for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
For Fabbri racing clutches
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Dimensions: 20x47x14 mm (Flywheel side )
Roller bearing gear shaft 16x22x12 mm for Vespa 50 N 2ยฐ/L/R/S 2ยฐ/SR/SS/90 2ยฐ/100/125/PV/ET3/PK50-125/XL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS VMS1T
Measurements: 16x22x12 mm
SKF clutch bell bearing 25x47x8 mm (16005) for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS VMS1T
Vespa PK
Dimensions: 25x47x8 mm
SKF bearing 6200/C3 gear shaft SKF 10x30x9 mm for Vespa 50-125/โPrimavera/โET3/โPK50-125/โS/โXL/โXL2-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Measurements: 10x30x9
SKF crankshaft bearing clutch side 17x47x14 mm (6303-C3) for Vespa 50-125/โPV/โET3/โPK50-125/โS/โXL/โXL2/โApe 50
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Vespa 125 PK ETS
Measurements: 17x47x14 mm (C3)
Nadella roller bearing flywheel side 25X38X15 mm for Vespa PK125 S 2ยฐ/โETS/โN/โXL/โXL2/โ125 GTR 2ยฐ/โTS 2ยฐ/โ150 Sprint V 2ยฐ/โSuper 2ยฐ/โ200 Rally 2ยฐ/โPX80-200/โPE/โLusso/โCosa
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
Measurements: 25X38X15
All models / Tutti i modelli
All models / Tutti i modelli
chrome
l=85 mm
ร internal 21mm
Complete thermal group Quattrini M1L 60 version S 60x51 for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Cone pin clip of Orto MA/UA/UB23S3 for Vespa 125 VNA/150 VB/VL/GS
Mounting and dismounting tool cross -BGM PRO- for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The BGM PRO ball crimping tool is an intelligently designed tool. It can be used to easily and conveniently install the gear balls with the spring in the main shaft of Vespa Smallframe engines.
Easy disassembly/assembly of gear balls
The gear balls are held firmly in place
The main shaft is held by the tool - both hands free to mount the gear lever
100% made in Germany
Without this tool, assembling the gear claw is a real game of patience. How do you position and sufficiently preload the balls on both sides at the same time without the gear spring shooting them into the infinite expanse of the workshop? It's not uncommon for the balls to simply disappear and you need new ones, of course exactly on a weekend...
With the BGM PRO tool, the job is done in no time. The whole process is so enjoyable that you want to do it over and over again. Simply because it is so nice... Indispensable in every Vespa workshop.
BGM Pro RACING full circle crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm
Stroke 51 rod 97
flywheel side bearing: 25mm
flywheel side oil seal: 24mm
flywheels:
87mm flywheel side
86mm pinion side
cases to be bored
Trolley extension for motorcycle mover (rear wheel) -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
Vespa Smallframe, largeframe, wideframe
Brilliant extension for maneuvering assistance by BGM PRO for all classic
Vespa and Lambretta scooters. With the addition for the rear wheel, the
vehicle can be turned on the spot. This way, the scooter can be stored
well and safely even in the smallest corner and can be easily removed
again. All this without any effort.
Grease Gun -NORMFEST- Lever grease gun for 400g or 500g cartridges and bulk grease
Complete clutch assembly for Vespa 50/90/125 Primavera ET3-PK/S/XL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Vespa 125 PK ETS VMS1T
Composed of 3 cork discs + 2 steel discs
Complete silent block with steel tube for Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Silent block--> 35x30x14mm
Tube--> 44x15x9.3mm
Rivet setting tool set ร=2mm, 3mm, 4mm, 5mm, 6mm for rivets according to DIN 660
Front gasket 108 Project between indicator and light body DX/SX for Vespa PX80-200/PE/Lusso/T5 Classic
Vespa PX 80
Vespa PX 80 E Arcobaleno
Vespa PX 100
Vespa PX 100 Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Arcobaleno
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Arcobaleno
Vespa P 200 E
Vespa P 200 E Arcobaleno
Vespa 125 PK S VAM1T Automatic
Front Siem gasket between indicator and shield DX/SX for Vespa PX80-200/PE/Lusso/T5 Classic
Vespa PX 80
Vespa PX 80 E Rainbow
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Rainbow
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Rainbow
Vespa P 200 E
Vespa P 200 E Rainbow
Vespa 125 PK S VAM1T Automatic
SIP disc brake master cylinder for Vespa PX`98/MY/`11 adaptable to other models
Vespa 125/150/200 PX`98/MY/`11
Adaptable to all other models (requires creating plates for mounting)
Base plate thermal group FlowPlate - LS ENGINEERING - for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP (mounting Quattrini M1L cylinders on PIAGGIO cases without boring and matching the ports)
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
8 mm base gasket for thermal group for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
1 mm spacer for thermal group for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
Three-hole puller for disassembling the conical gear of the primary transmission for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Provided are no. 3 M4 screws with recessed hexagon and one central hex head screw no. 13
Required wrench: 19
Magnet flywheel fan 12 blades CNC/RACING VMC in gold anodized aluminum
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK S/XL, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PK S/XL
Complete Evok "Soft Iron Clutch" for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
EVOK "Soft Iron Clutch" Clutch Kit for Vespa Smallframe (Up to 18 HP)
Are you looking for the perfect combination of lever smoothness and impeccable grip? The EVOK Soft Iron Clutch Kit is specifically designed for all Vespa Smallframe with power up to 18 HP.
Resulting from the continuous research and development of the Italian brand, this kit represents the perfect bridge between the original spare part and high performance: it guarantees significantly higher stress resistance without sacrificing everyday modulatability.
๐ WHY CHOOSE THE EVOK SOFT IRON CLUTCH?
CNC Engineering from Solid: The clutch body is made of CNC aluminum with hard anodizing treatment in the iconic EVOK orange color, while the inner basket is made from solid hardened steel for maximum longevity.
Kevlar Ferodo Racing Discs: Includes Kevlar-lined discs developed in collaboration with Ferodo Racing, designed to withstand high temperatures and eliminate slipping issues.
All models
Practical packaging with reduced dimensions, essential for on-the-road repairs.
The kit contains:
1 Long nose pliers
1 Wire cutter
1 Flathead screwdriver
1 Phillips screwdriver
1 Bit holder
10 Bits
1 Extension
7 Sockets (11/10/9/8/7/6/5 mm)
5 Wrenches (6/5/4/3/2 mm)
Pair of black grips with Malossi MHR BLACK logo for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The new Malossi MHR grips aim for a trio of elements: design-Safety-comfort.
Every detail has been designed and defined based on these three elements, essential for an aggressive design, secure grip, and comfort while riding.
In particular, the design favors vibration absorption, the dimensions make the grip secure and manageable, and the ergonomic structure allows the palm to rest without inflaming the forearm.
The Malossi MHR BLACK grips are made with a thermoplastic rubber with high mechanical characteristics and excellent heat resistance, the result of extensive research aimed at selecting special polymers with high elasticity and soft touch. This material ensures the MHR BLACK grips' resistance in all usage conditions and, consequently, great durability. Finally, the soft touch conveys a sensation of pleasure and comfort to the user.