Vespa PX 200 E VSX1T
Petals lamellar pack MRP Vforce 4 (thickness 0.42mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Vespa 50/90/125/150/200 PX-Special
SIP license plate holder, for German license plate, rear all models
All models
180x200 mm
Material: plastic
black
IDM PARMAKIT electronic control unit for Parmakit electronic ignitions
Flywheel side crankshaft seal Malossi in FKM 24X35X6 mm for Vespa 125/150/200 PX
Vespa PX/PE
Vespa ETS
Vespa 50/90/125/150/200 PX-Special
All models/All models
BGM Pro Electronic Magnet Flywheel with Dual Phase for Vespa 125/150/200 PE/PK
Vespa PX
Vespa PE
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.3kg
Crimaz disc brake master cylinder assembly at the handlebar (without pump) for Vespa 80/125/150/200 PX-PE
Vespa 80/125/150/200 PX-PE
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Vespa 50/90/125/150/200
Clutch slider for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All Models
Mounting in place of the bearing on soft support
Vespa 50/90/125/150/200
for VHSB/VHSC carburetor
for carburetor VHSB/VHSC
Complete strip kit for 108 Project black footboard for Vespa 80/125/150/200 PX-PE 1st Series
Vespa 80 PX V8X1T >30160
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >44000
Vespa 150 PX VLX1T >410580
Vespa 200 PE VSX1T >138292
Powder coating, very durable.
Vespa 125 PX 1982>1983
Vespa 150 PX 1982>1983
Vespa 200 PE 1982>1983
9 Wires: 3 Yellow, 2 Blue, Purple, Brown, Gray, White
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Tightening with 14 mm wrench
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
Gas oleopneumatic, Compression and extension can be adjusted
separately through 16 millimetric adjustments. The spring preload is
precisely adjustable, body made of very resistant light alloy,
spring and tank anodized in Dark Gray color.
Height--> 225 mm
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
ร 29 mm
for bearing 25x38x15/25x52x15 with bearing ring
a=95 mm
ร 85 mm
ceramic
red
in gift box
SIP PERFORMANCE RADIAL Classic NT disc brake "Classic Look" front for Vespa 80/125/150/200 PX-PE 2nd series with ร 20 mm pin - PK50-125/โS/โSS/โXL/โXL2/โAutomatic
Vespa 80/125/150/200 PX-PE 2nd series pin ร 20 mm
Vespa 125 PX E VNX2T 1115>
Vespa 150 PX E VLX1T 346430>
Vespa 200 PX E VSX1T 112624>
Vespa PK50-125/โS/โSS/โXL/โXL2/โAutomatic
With SIP Sport brake disc, with RADIAL silver brake caliper, WITHOUT brake pump, WITHOUT brake hose
Approval: TGA for Brake caliper 5644 and Front brake caliper support 39072
Vespa 50/90/125/150/200
SIP classic bag/luggage in hazelnut color
480x300x270 mm
approx. 35 l
nylon
beige brown RAL 1011
Pair of smoked original SIEM light bodies (right and left) for Vespa 80/125/150/200 PX-PE-My-2011-LML
Vespa PX 80
Vespa PX 80 E Arcobaleno
Vespa PX 100
Vespa PX 100 Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Arcobaleno
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Arcobaleno
Vespa P 200 E
Vespa P 200 E Arcobaleno
Color: Smoke
Reinforced floorboard profiles "Easy" ST Corse in Stainless Steel for Vespa 80/125/150/200-PX-PE-LML-T5
Vespa 80/125/150/200-PX-PE-LML-T5
Vespa Floorboard Reinforcement Profiles | Stainless Steel Anti-Crack Kit
Problem solved: The most stressed area of the floorboard, where the stand and brake pedal screws rest, is subject to continuous stress. Every time you use the stand, the sheet metal flexes. Result? Unsightly and difficult-to-repair paint and filler cracks.
Solution: These stainless steel profiles create a structural reinforcement that distributes the loads and protects the paint, keeping the floorboard perfect over time. It's not just a screw cover: it's a real mechanical stiffening.
Complete Kit Contains:
2 stainless steel profiles (right and left)
Numerical control laser cutting for millimetric precision
Professional sandblasted finish
8 M6x25 hex socket head screws with stainless steel domed head Ideal for uniform fastening without compromising aesthetics
Key advantages in summary:
โ
Effective structural reinforcement: Distributes flexural loads
โ
Anti-crack protection:
"Easy" ST Corse platform reinforcement profiles in stainless steel Black Version for Vespa 80/125/150/200-PX-PE-LML-T5
Vespa 80/125/150/200-PX-PE-LML-T5
Vespa Floorboard Reinforcement Profiles | Stainless Steel Anti-Crack Kit
Problem Solved: The most stressed area of the floorboard, where the stand and brake pedal screws are located, is subject to continuous stress. Every time you use the stand, the sheet metal flexes. The result? Paint and filler cracks, unsightly and difficult to repair.
Solution: These stainless steel profiles create a structural reinforcement that distributes loads and protects the paint, keeping the floorboard perfect over time. It is not just a screw cover: it is a real mechanical stiffening.
Complete Kit Contains:
2 stainless steel profiles (right and left)
Numerically controlled laser cutting for millimetric precision
Professional sandblasted finish
8 M6x25 hex screws with domed head in stainless steel Ideal for uniform fastening without compromising aesthetics
Key Benefits at a Glance:
โ
Effective structural reinforcement: Distributes flex loads
โ
Anti-crack
Vespa 80/125/150/200-PX-PE-LML-T5
Vespa Footboard Reinforcement Profiles | Stainless Steel Anti-Crack Kit
Problem Solved: The most stressed area of the footboard, where the stand and brake pedal screws rest, is subject to continuous stress. Every time you use the stand, the metal flexes. Result? Paint and filler cracks, unsightly and difficult to repair.
Solution: These stainless steel profiles create a structural reinforcement that distributes loads and protects the paint, keeping the footboard perfect over time. It is not just a screw cover: it is a real mechanical stiffening.
Complete Kit Contains:
2 stainless steel profiles (right and left)
2 profiles for fuel tank
Numerical control laser cutting for millimetric precision
Professional sandblasted finish
8 M6x25 hex head screws with stainless steel dome head Ideal for uniform fastening
without compromising aesthetics
4 Spacer bushings for tank brackets
Key Benefits at a Glance:
โ
Effective structural
All models
JET HELMET - CITY ONE
Outer shell made in two sizes
Thermoplastic material
Retractable sun visor
Wind tunnel tested
Maximum silence
Maximum comfort
Maximum safety
Pinlock ready
Bluetooth ready
Inner tube SIP 3.00/10 - 3.50/10 for Vespa 125 Primavera ET3/GT/GTR/TS/PX-150 Sprint/Sprint V./PX-160 GS/180 SS/Rally-PE-Ape 50
Vespa 50 since '71
- Vespa 125 since '66
- Vespa 150 since '66
- Vespa 150 GS VS1>5T
- Vespa 160 GS VSB1T
- Vespa 180 SS VSC1T
- Vespa 180 Rally VSD1T
- Vespa 200 Rally VSE1T
- Vespa PE
90ยฐ Valve
Premium quality
3.00/10,3.50/10
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PX/Rally/Cosa
Kit Consists of: Reinforced springs and perforated cups.
Starter rod with knob for Vespa 125/150/180/200 GTR-TS-PX-Super-Sprint veloce-Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa 150 Super VBC1T 221195>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa PX 150 E Arcobaleno VLX1T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa 150 PX VLX1T Millennium '98
Vespa 150 PX 2011 Z
DEXTER racing clutch plate with axial thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Michelin Inner Tube 10 B 43.00/10 - 3.50/10 for Vespa 125 Primavera ET3/GT/GTR/TS/PX-150 Sprint/Sprint V./PX-160 GS/180 SS/Rally-PE-Ape
Vespa 50 since '71
- Vespa 125 since '66
- Vespa 150 since '66
- Vespa 150 GS VS1>5T
- Vespa 160 GS VSB1T
- Vespa 180 SS VSC1T
- Vespa 180 Rally VSD1T
- Vespa 200 Rally VSE1T
- Vespa PE
90-degree valve
3.00/10,3.50/10
Dell'orto SI 20/20 MIX Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Oil can support - luggage rack for inner shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Measurements---> L 13.5 cm H18.5 cm
Vespa 50/90/125/150/160/180/200
l=640 mm
l=270 mm
in recycled truck tarpaulin
black
empty, without tools
Vespa 125/150/160/180/200
Note: Long Step
Comparison--> BOSCH W3C/W3CO/W3CC/W3CP/W260MZ2/W275T2/W280MZ2 / CHAMPION N2C/N2/N60/OE040 / DENSO W27ES/W27ESU / NGK B9ES
RDV swivel engine stand adapter from vise for Vespa 125/150/160/180/200 VNB-VBB-GT-GTR-TS-Sprint-GL-Rally
Vespa 125/150/160/180/200 VNB-VBB-GT-GTR-TS-Sprint-GL-Rally
Carburetor Gasket Kit SI 20.20-26.26D/E/G Vespa 125-150-200 PX PE
Vespa 80/100/125/150/200 PX PE- Sprint Veloce
For Carburetors SI20>SI24
8 Pcs Kit.