Vespa 50 Spare Parts
Welcome to the section dedicated to the icon that made scooter history in Italy: the Vespa 50. Whether you are restoring a glorious Vespa 50 in any of the models, here you will find everything you need to bring your "vespino" back to its former glory.
Our catalog offers a complete selection of spare parts for vintage Vespa 50, chosen to ensure quality, reliability, and fidelity to the original.
Wheel rim (modification from wheels 2,3/4 x 9 2.75 x 9 to 3,50 x 10) for Vespa 50 R-Special
Vespa 50 R V5A1T 752189> (Adaptable)
Vespa 50 Special V5A2>3T (Adaptable)
Aluminum
M8 nuts and grover washers
Full wheel rim modification for Vespa 50 S/SR/Sprinter/Revival/90/100 1, modification 9-->10 inches for Vespa 50 N/L/R
Vespa 50 V5A1T N,L (modification)
Vespa 50 V5SA1T
Vespa 50 V5SS2T
Vespa 90 V9A1T
M 8 nuts (11mm spanner), washers
Aluminum
3.00 x 10
Vespa 50-100/N/L/R/S/SR
M 6 with 8 mm key
Round folding rearview mirror left or right FAR for Vespa 50/90/125/150/200 Special-GT-VNB-PX-Rally
Vespa 50/80/90/125/150/180/200
Adjustable for all smartphone brands, CNC machined forged aluminum, black anodized
M14x1.25, wrench width 20.8mm
shielded/long thread
corresponds to BOSCH W4CS/ DENSO IW24/W24ESG-U/W24ESRZ-U
Original SIEM rear light bulb holder spring for Vespa 50 Special
Vespa 50 Special V5B3>4T
Warning: Compatible only with original SIEM taillights
BARRDAHL - Cleaner, detergent, degreaser, deoxidizes, protects electrical contacts Electrical Contact Cleaner 500
All models
Particularly effective for cleaning electrical and electronic equipment
Continental conti-twist tire 90/90/10 50m for Vespa 50/90/125 N-L-R-Special-Primavera-ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
Load index: 50M
Notes: Tubeless
ATHENA brake shoe plate gasket for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 PK (All)
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Hello-YES-Bravo
External coil - BGM PRO with fixed timing for IDM ignition - Ducati blue type Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
for IDM ignition - Ducati type blue Vespa PX, PK, Lambretta - used for Polini IDM, Vespatronic, VesPower, Varitronic, Flytech, Parmakit
Vespa 50 PK XL-HP
All models
• With rotating magnetic clip.
• Excellent lighting.
• Low energy consumption.
• Long lifespan.
• Batteries (not included): 3 x AAA
• Battery life: ± 6 h
• Light source: 1W Cob + 1 Led
• Brightness: 100 lm
• Light temperature: 6000° K
• Protection class: IP 44
Vespa Primavera/Sprint 50-150ccm 2T/4T AC
Fork cover PIAGGIO to be painted for Vespa LX/LXV 50-150ccm
Vespa LX/LXV 50-150ccm
Vespa 50 Special V5A2T>3T (Adaptable)
Vespa 50 Special V5B1T>4T (Adaptable)
Vespa 90 V9A1T 141544 >
Vespa 125 Primavera VMA2T 0140162 >
Vespa 125 Primavera ET3 VMB1T
Main feature: With attachment under the headlight
Quick Shift Gear Command Pulley "Short Shifter" for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK N
Vespa 50 PK Rush
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Ø 50 mm
aluminum, CNC milled
silver anodized
Complete VMC Pro CUP 2 piston with a diameter of 56 for Vespa 50 Special/NLR/Primavera/ET3
VMC Pro CUP 2
Multi-purpose Lithium Grease BARDAHL M.P.G. MPG NLGI (250ml package)
500g
Replacement black SPORT Crimaz pads for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Dimensions: 51.50x40x6.80 cm
Primary transmission gear set Easy Crimaz z27 on 69 clutch bell for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary transmission gear set Easy Crimaz z24 on 72 clutch bell for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary transmission pair TOP Crimaz z26 on bell 69 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear shaper tool
1.5 with relative corrections for the sprockets added to the original
pair.
The tooth width has been widened (1 mm towards the inside) to
achieve greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater travel of the damper preserves the gearbox and cruise.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.
TOP Crimaz primary transmission pair z26 on bell 69 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear hob
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm towards the inside) to
achieve greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater travel of the shock absorber preserves the gearbox and the cruise.
In the center, there is a roller bearing on the most
stressed part and a guiding bushing on the tail. This solution
allows the bell to be compatible with the original starting gears.
Primary transmission pair TOP Crimaz z25 on 69 bell with reinforced clutch basket and shock absorbers for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module hob
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm towards the inside) to
have greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater travel of the shock absorber protects the gearbox and cruise.
In the center there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.
Primary transmission pair TOP Crimaz z25 on 72 bell with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear shaper
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm inward) to
provide greater strength without compromising smoothness.
The spring seats have been revised to use springs with square
wire. The greater travel of the shock absorber preserves the gearbox and clutch.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.
Primary transmission pair TOP Crimaz z24 on 72 bell with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module 1.5 gear shaper tool with relative corrections for the pinions added to the original pair.
The width of the tooth has been widened (1 mm inward) to have greater resistance without compromising smoothness. The spring seats have been revised to use springs with square wire. The greater stroke of the shock absorber preserves the gearbox and the cruise. In the center, there is a roller bearing on the most stressed part and a guide bushing on the shaft. This solution allows the bell to be compatible with the original starting gears.
Primary transmission pair TOP Crimaz z23 on bell 72 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module
1.5 gear shaper tool with relative corrections for the pinions added to the original pair.
The width of the tooth has been widened (1 mm towards the inside) to
provide greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater stroke of the shock absorber preserves the gearbox and cruise.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting gears.
Primary transmission gear pair TOP Crimaz z22 on 72 bell with reinforced clutch basket and shock absorbers for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module 1.5 gear cutter tool with relative corrections for the pinions added to the original pair.
The width of the tooth has been widened (1 mm towards the inside) to have greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater stroke of the damper preserves the gearbox and the driveshaft.
In the center, there is a roller bearing on the most stressed part and a guide bushing on the shaft. This solution allows the bell to be compatible with the original starter gears.
Crimaz clutch bell with double spring seat for Vespa 50/90/125 Primavera ET3-PK/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Born for drag racing, it optimizes the clutch operation both in release and grip.
The 2 support planes for the springs ensure that the clutch plates descend performing the correct movement.
Completely reinforced at critical points, it is made from solid high-strength steel. Designed for central spring clutches/double central spring.
Compatible with original clutch and extractor.
Crimaz intake closure cap on Quattrini Vespa V50/V90/SS50/SS90/125- ET3/PK S/PK XL engine casing
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The suction cap is made of stainless steel with a thickness of 1mm. It is manufactured through laser cutting and subsequent laser marking. Useful for protecting the luggage compartment from dirt when not in use. Included are no. 4 white zinc plated T.B.E.I M6x6 screws with locking coating.
Extra short intake manifold for GT reed valve Quattrini or DEA Racing for Vespa 50/125 Special-N-L-R-ET3
The intake manifold, machined from solid, is provided already worked and ready to be installed. The reduced length and the particular taper of the duct improve the engine's response across the entire power range. Ideal for VHSB 34 LD carburetor or alternatively carburetors with a 44mm diameter connection. Compatible with all QUATTRINI reed valve cylinders for Vespa Smallframe.
Born for the track, it anchors to the engine casing on the engine pillar.
It comes with 2 anti-vibration mounts to be fixed on the bracket slots, and 2
raw sheet metal plates to be welded onto the exhaust in the ideal position.
Its total adjustability allows the exhaust to be positioned without tension, preventing it from breaking. Made of galvanized steel.
Crimaz gold brake pads replacement for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Crimaz black brake pads replacement for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Primary transmission gear pinion 28 Teeth (28-69) for Vespa 50-90-125 Primavera/ET3/PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Fits perfectly on bell 27-69, complete with washer and nut
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
In galvanized metal.