Replacement black SPORT Crimaz pads for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Original reference: CRIFD5043N5
Dimensions: 51.50x40x6.80 cm
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Related articles
Vespa 50/125/150/200
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Crimaz brake pedal for hydraulic brake Vespa 50 R 2°/S 3°/Special V5B3T 2° /90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80 -200/PE/Lusso/`98/MY/`11/T5
Vespa 50 V5A1T 914748>
Vespa 50 Special V5B3T 230536>
Vespa 90 V9A1T 184927>
Vespa 125 Primavera VMA2T 0192145>
Vespa 125 Primavera ET3 VMB1T 52721>
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa 50/125 PK
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Kit specifically designed for the installation of the disc brake on Vespa, both small frame and large frame.
The kit includes a high-quality braided hose, produced in Europe, with a length of 1450 mm and an outer diameter of 7.5 mm. It comes with three different fittings to ensure maximum compatibility with every type of fork.
One of the three fittings is crimped directly onto the hose; on the opposite end, one of the two fittings included in the kit should be installed.
The installation involves threading the hose inside the fork and the handlebar, cutting it to size, and then making the final connection.
For mounting the screw-on fitting, it is necessary to remove about 35 mm of the outer sheath of the braided hose.
Length--> 1450 mm
20° fitting
45° fitting
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Tubo freno anteriore in acciaio inox rivestito di colore nero, con attacchi in acciaio cromato Ø8 mm inclinati a 20° e lunghezza totale di 115 cm.
Fornito completo di gommini per il fissaggio, n. 2 bulloni raccordo olio M8x1 e n. 4 O-ring di tenuta per un’installazione pronta e sicura.
Prodotto Made in Italy, realizzato con materiali di alta qualità per garantire resistenza, durata e massime prestazioni nel tempo.
VMC Quick Release Competition Brake Hose Kit with Quick Release for Hydraulic Disc Brakes
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
The real innovation of this VMC kit is the Quick Release system, created by a leading company in brake hose production and based on the same principle used in racing motorcycles. Thanks to this system, it is possible to disconnect and reconnect the caliper or brake pump in seconds, without the need to bleed the system again each time.
A fundamental advantage for track use, especially during an endurance race or in pit stop operations between sessions, where every minute saved can make a difference. The system also ensures high sealing and reliability, without compromising on build quality.
The kit is equipped with a three-layer braided steel brake hose, the same used for some time in our brake hose kits. A high-quality solution, designed for those who demand maximum braking control on modified Vespa, MiniGP, pitbike, or high-performance scooters.
The stainless steel structure ensures a direct and constant transmission of braking force, offering a precise, clear, and repeatable command feel, brake after brake and stop after stop.
Product intended exclusively for track use.
The kit must be installed by competent personnel, strictly following the assembly instructions. Any
Braided Evok Iron Brake Hose for VMC Disc Brake Pump and Caliper
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Aeronautical Brake Hose with Stainless Steel Braid for Vespa
Features and Materials
Inner Core in PTFE (Teflon) The hose is equipped with a high-flow PTFE inner liner, characterized by high chemical resistance and compatible with synthetic brake fluids DOT 3, DOT 4, and DOT 5.1.
External reinforcement in stainless steel braid, the exposed metal braid structure is designed to minimize radial expansion of the hose under pressure, limiting the classic spongy effect of the lever during more intense braking. The result is a more direct, precise, and consistent braking response.
The kit includes two banjo fittings with non-crimped ferrule, designed to facilitate the passage of the hose inside the fork or the steering tube of the Vespa, simplifying installation operations.
Technical Specifications
Inner core: PTFE (Teflon).
Compatible fluids: DOT 3, DOT 4, and DOT 5.1.