Spare Parts Vespa 50 Sprinter V5SS2T
An exclusive selection of spare parts for Vespa 50 Sprinter (chassis V5SS2T), the rare "fast" version produced in the '70s for the foreign market. Here you will find the hard-to-find components for this collector's model: from the iconic "Sprinter" adhesive stripes for the shield and sides, to the specific thermal group that made it faster than the standard 50. Rely on our catalog for a faithful restoration of this piece of Vespa history.
Inner Tube Good ride for Vespa 125 Primavera ET3/GT/GTR/TS/PX-150 Sprint/Sprint V./PX-160 GS/180 SS/Rally-PE-Ape 50
Vespa 50 from '71, Vespa 125 from '66, Vespa 150 from '66, Vespa 150 GS VS1>5T, Vespa 160 GS VSB1T, Vespa 180 SS VSC1T, Vespa 180 Rally VSD1T,
Vespa 200 Rally VSE1T, Vespa PE
3.00/3.50-10
90-degree valve
RMS Classic Inner Tube 3.00/3.50-10 TR87 for Vespa 125 Primavera ET3/GT/GTR/TS/PX-150 Sprint/Sprint V./PX-160 GS/180 SS/Rally-PE-Ape 50
Vespa 50 from '71, Vespa 125 from '66, Vespa 150 from '66, Vespa 150 GS VS1>5T, Vespa 160 GS VSB1T, Vespa 180 SS VSC1T, Vespa 180 Rally VSD1T,
Vespa 200 Rally VSE1T, Vespa PE
3.00/3.50-10
90 degree valve
Vee Rubber
Clutch nut locking washer for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK - PK XL - PK FL2-Ape 50
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Vespa PK
Vespa XL
Vespa PK FL2
Vespa 125 ETS VMS1T
Steel
Complete clutch mounted with reinforced spring POLINI for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Vespa 125 PK ETS VMS1T
Composed of 3 cork discs + 2 steel ones
Complete clutch "VMC HARD WORK" for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Complete clutch IRON CLUTCH EVOK 35 hp for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
WHERE PERFORMANCE BEGINSThe
EVOK IRON CLUTCH KIT VESPA SMALL FRAME, ensures a significant
improvement in stress resistance for engines up to 35
HP.Tested and approved at the RABBIT 24H ENDURANCE 2023Thanks
to the experience gained over the years in the
motorcycle sector, EVOK has developed a range of products that
stand out for reliability and quality.EVOK is the bridge between
the original spare part and performance, with a range of spare parts that
guarantee a step of technical or aesthetic improvement.OUR DNA:- Pioneers of Soft Tuning- Performance- Quality- Plug and Play ProductsThe important
work in the research and development sector is reflected in all
product categories, always updated and keeping up with the times,
EVOK develops its offer focusing on the Italian and
European market.All EVOK components undergo thorough quality checks, from production to packaging.
TECHNICAL FEATURES
The EVOK IRON CLUTCH KIT VESPA SMALL FRAME consists of:- 4 EVOK sintered discs (Spare part
Complete Polini Sport Clutch with Wave Spring for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
- 4 Clutch discs, thickness 1.9 mm
- 3 Metal clutch discs, thickness 1 mm
- 1 Wave Spring
Complete clutch Cif by Fabbri Racing MONOSPRING up to 15hp for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
TECHNICAL SPECIFICATIONS:
The clutch is composed of:
-> Clutch basket made from solid steel
-> 1 steel spring h mm.48
-> Spring pusher and closure disc made from an innovative alloy used on all Fabbri Racing clutches. This alloy ensures the longevity of the spring holder and closure disc.
-> 4 lined discs with organic friction material
-> 3 intermediate discs in Swedish steel with a thickness of mm.0.8
-> High-strength steel seeger ring
-> Plate and spring suitable for installation on all Vespa Small Frame models
CRIMAZ black racing rack clutch cover for Vespa PK50XL2/ FL/ HP/ PK125FL/ XL2 also suitable for Vespa 50/ 50 Special/ ET3/ Primavera-Ape 50
Vespa PK50XL2/ FL/ HP/ PK125FL/ XL2
suitable also for Vespa 50/90/125 Primavera VMA1>2T/ET3
Evok Iron Clutch Cover for Vespa PK50XL2/ FL/ HP/ PK125FL/ XL2 also suitable for Vespa 50/ 50 Special/ ET3/ Primavera-Ape 50
Vespa PK50XL2/ FL/ HP/ PK125FL/ XL2
suitable also for Vespa 50/90/125 Primavera VMA1>2T/ET3
Crankshaft bearing SKF (6204/ C4) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Measurements: 20x47x14 mm (Flywheel side )
Pinasco bearing crankshaft flywheel side (20x47x14mm) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125
High-speed bearing with bakelite cage, reduced rolling friction, this ensures better fluidity and quietness of the engine significantly increasing the number of revolutions.
Pinasco bearing crankshaft clutch side (17x47x14mm) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125
High-speed bearing with bakelite cage, reduced rolling friction, this ensures better fluidity and quietness of the engine, significantly increasing the number of revolutions.
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Dimensions: 20x47x14 mm (Flywheel side )
Malossi bearing crankshaft flywheel side tolerance C4 (20x47x14mm)
Vespa 50/90/125
Special precision bearings.
High-speed bearings with increased load, designed and tested for racing internal combustion engines.
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Dimensions: 20x47x14 mm
Cage in polyamide
Crankshaft bearing SKF flywheel side 20x47x14 mm (6204 TN9-C3) for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50 gear shaft wheel side for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso 1°-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3-PK
Dimensions: 20x47x14 mm
Cage in polyamide
Seeger ring for clutch bearing safety and primary gear pin Vespa 50 N/L/R-Special-90-125 Primavera ET3/PK/XL/XL2-125 GT 2°/GTR 2°/TS/150 Sprint 2°/V 2°/Super 2°200 Rally/P80-200/PE/Lusso/T5/Cosa-Ape 50
Vespa 50 S V5SA1T
Vespa 50 N/L/R V5A1T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Multifunction spray, lubricant and protective.
Thanks to its semi-fluid consistency, it penetrates the most difficult-to-reach areas, lubricating and protecting. Ideal for chains, hinges, and other metal components that require protection and lubrication. Its high resistance makes it ideal for bicycle and motorcycle chains with and without "O" rings.
Reinforced key kit Fabbri Racing for Vespa Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Reinforced Crimaz key kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Piston pin roller cage (12x17x13) for Vespa 50 N/L/R-Special-/PK50/S/XL/XL2-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Size: 12x17x13 mm
Clutch key for Vespa 50/90/125/Primavera/ET3/PK50-Ape 50-125/S/XL-flywheel side GS 150-160
Vespa 50 V5A1T N,L,R (clutch side)
Vespa 50 Special V5A2>3T (clutch side)
Vespa 50 Special V5B1>4T (clutch side)
Vespa 90 V9A1T (clutch side)
Vespa 125 Primavera VMA1T>2T (clutch side)
Vespa 125 Primavera ET3 VMB1T (clutch side)
Vespa PK (clutch side)
Vespa 150 GS VS1T>5T (clutch and flywheel side)
Vespa 180 SS VSC1T
Measurements: 3x9.3mm
VMC steel key kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
1 VMC steel key 3.7x7x9.3
2 VMC steel key 3x15x13
Crankshaft Quattrini A-8736 full circle ⌀ 87 cone 20 stroke 51 rod 97 for Vespa 50/90/125 Primavera ET3 / PK-Ape 50
Vespa 50/90/125 Primavera ET3 / PK
Full shoulders Ø87mm, stroke 51mm, connecting rod 97mm, shaft length 48mm.
Pin 15 mm
Reinforced SS Crimaz spring for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125 Primavera ET3
Cross gear shift spring with balls for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50/90/125 Primavera ET3
PIAGGIO wheel rim in Aluminum color for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: M8 nuts and grover washers
8 mm
Wheel rim tightening
Zinc-plated hex nut kit Pcs.5 (M8 with 13mm wrench) for Vespa 50/125/150/200 Special-Primavera-GT-GTR-TS-GS-GL-Sprint-Sprint Veloce-Rally-PX
Vespa 50 Special V5B1>3T
Vespa 50 PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 PK
Vespa 125 PX
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Sprint VLB1T
Vespa 180 Rally VSD1T
Vespa 200 rally VSE1T
Vespa 200 PE
Wheel rim fastening
Vespa 50 Special V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
3.00/10
M8 nuts and grower washers
Chromed
Complete thermal group Pinasco (102cc) in cast iron for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore: 55
Stroke: 43
Displacement: 102 cc
Complete Polini evolution 2 thermal group (136 cc) for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Diameter: 58 mm
Stroke 51 mm
- Bore the cylinder fitting hole with a milling cutter to a diameter of 64 mm +0.01/-0.00 depth 20mm
- It is necessary to remove the ignition cover casing that protrudes from the cylinder plane
- Place the base and intake gaskets and perform the matching with a milling cutter
Complete Malossi cast iron thermal group (75 cc) for Vespa 50 N/L/R-50 Special-PK-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Stroke 43 mm, bore 47 mm, 6 transfer ports
Cylinder base gasket in paper for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
Exhaust manifold fastening kit (2 pcs) for Vespa 50 N-L-R/Special/PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Complete thermal group Polini (102cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
6 Transfers/Bore: 55/Stroke: 43/Displacement: 102 cc
recommended spark plug: L78C Champion
Thermal group VMC ET6-60 144cc Ø 60mm and stroke 51mm Vespa 50/125-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
6-port aluminum cylinder, shell moulding technology, Nikasil-treated liner
Bore diameter 60mm Stroke 51mm Displacement 144cc SINGLE PORT EXHAUST
Main Transfer Phases 126° Exhaust 186°, exhaust stud spacing 56mm, exhaust outlet diameter 32mm
Piston with 2 Rik steel rings complete with pin and clips.
Die-cast aluminum head with SIDE spark plug and 4 additional fixing screws.
Squish 1.1mm ± 0.1mm. Tightening torque for M7 studs: 11÷12 Nm, Tightening torque for M6 screws 10÷11 Nm
Complete with bolts and cylinder gaskets of various thicknesses.
It is a versatile cylinder suitable for mild tuning as well as more extreme modifications.
With more generous expansion exhausts like the VMC EVO 52, it transforms into a classic 2-stroke racing engine.
When fitted with the Vmc Siluro Sport, the cylinder becomes a fast touring engine with generous torque from low revs and excellent top-end.
Note: To be mounted on