Spare Parts Vespa 50 Sprinter V5SS2T
An exclusive selection of spare parts for Vespa 50 Sprinter (chassis V5SS2T), the rare "fast" version produced in the '70s for the foreign market. Here you will find the hard-to-find components for this collector's model: from the iconic "Sprinter" adhesive stripes for the shield and sides, to the specific thermal group that made it faster than the standard 50. Rely on our catalog for a faithful restoration of this piece of Vespa history.
Primary transmission straight-toothed bell EVOK z69 for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Clutch bell machined from solid complete with springs and 69-tooth primary, compatible with 26 and 28-tooth pinion. Shock absorbers machined from solid.
Primary transmission gear 22 Teeth (22-72) for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly by replacing the original 24-tooth sprocket.
Ratio--> 3.30
Primary drive gear DRT z25 on crown z69 for Vespa 50/90/125 Special-Primavera-ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly by replacing the original 27-tooth sprocket.
Primary transmission gear set Polini with straight teeth Z 27x69 (2.56) for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Z 27 X 69 with straight teeth
with shock absorber
Bevel gear primary transmission pair z26 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the keyway.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type locking compound on
the fixing nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.
DRT primary transmission gear Z 25 on crown Z 61 (2.44) for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Clutch basket with primary gear repair kit VMC for Vespa 50/125 Special-Primavera-ET3-Ape 50 002783
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Great upgrade kit for the primary transmission ratio of
all 125 Primavera/ET3, PK80-125 S/XL/XL2 engines (also usable
in 50cc engines if a primary transmission ratio with cush drive is installed).
Primary Basket With Cush Drive Overhaul Kit Vmc For Vespa Smallframe
Tested on engines with power over 35hp and used for years with
satisfaction by many customers both on track and on the road.
Super balanced and made of high-strength steel with anti-wear surface treatment, it is supplied with increased resistance springs with original Piaggio dimensions to avoid modifications to the bell or spring seats as in competing products.
Compatible with Piaggio and aftermarket gears available on the market.
The perfect choice to pair with our Vmc Hard Work 4 and 5 disc clutches.
Say goodbye to the thought of the cush drive and enjoy your Vespa to the fullest!
APPLY STRONG THREAD LOCKER TO THE SCREW THREADS BEFORE ASSEMBLY
Primary transmission gear pair Z 24x61 for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Z 24x61 with helical teeth
With shock absorbers
Primary transmission gear pair straight teeth Z 24x72 for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Z 24 X 72 with straight teeth
with shock absorber
The CGM 265 MICRO is the full-face helmet designed specifically for young motorcyclists. Created to offer the perfect blend of maximum protection and absolute comfort, this model stands out for its extraordinary lightness, crucial to avoid straining the neck of the little ones while riding.
Safety meets style: with modern and captivating graphics, wearing the helmet becomes fun for young bikers, while sizes specific for children and teenagers ensure a stable, precise, and secure fit.
Why choose it: Strengths
Exceptional Lightness: With an average weight of only 1050 gr, it minimizes cervical fatigue.
Visibility and Safety: Interiors equipped with high-visibility reflective bands for safe travel even in low light conditions.
Perfect Climate: Air Stream System ventilation with 3 zones and internal ducts for dynamic and constant air circulation.
Maximum Practicality: Quick-release visor and fully removable and washable interiors for hygienic and quick maintenance.
Technical Specifications and Comfort
The CGM 265 MICRO does not compromise on the features of adult helmets, adapting them to a junior format:
Long Swinging Vis
Engine door gasket and bushing kit for Vespa 50/90/125 Primavera ET3
Vespa 50 N V5A1T 92877>
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Scooter-Vespa 50 cc new plates from 2004
A high-quality product designed for all 50cc Vespas, created to replace the old plastic license plate holder. Simple and compact design that retains the entire original rear line of your Vespa.
A license plate holder with a completely new and original concept. How beautiful can the lines of the Vespa be without being interrupted by the classic rear license plate holder? We redesign everything and pretend that in 1993, the year the license plate became mandatory, it was absolutely essential not to ruin the Vespa's rear line: thus, the "Hide" license plate holder was born.
It maintains the idea and all the lines that Corradino D'Ascanio designed, creating a masterpiece called Vespa.
This all stainless steel license plate holder consists of a solid 4mm supporting structure and a plate that, besides holding the license plate, contrasts with the finishes of the supporting structure. The satin stainless steel along with the black painted one gives a strong character to this accessory that, although hidden, certainly does not go unnoticed. The "White on Black" engraved logo, which distinguishes the originality of this product, is now indispensable.
Materials: As always, the researched study of the best material remains
Complete chrome luggage rack for Vespa 50-125 Primavera-ET3Rally180, Vespa Rally200, Sprint150, TS125, GT125, GTR125-PX-PE
Vespa 50/90/125/150/160/180/200
Complete black luggage rack for Vespa 50-125 Primavera-ET3Rally180, Vespa Rally200, Sprint150, TS125, GT125, GTR125-PX-PE
Vespa 50/90/125/150/160/180/200
Product 100% Made in ITALY
All models / Tutti i modelli
Useful for regulating voltage fluctuations in light bulbs
Complete 5-speed gearbox FABBRI Racing z 11-56, 15-53, 18-50, 20-47, 21-46 for Vespa 50, 90, 125 ET3 Primavera, PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Complete gearbox for track use, ensures optimal gear shift,
mountable only on Quattrini or Fabbri racing crankcases with respective
modifications on the Quattrini crankcase, according to our instructions.
Evok magnetic license plate holder with specific internal housing for Apple® AirTag® for Vespa 50 N/L/R-Special-PK
Scooter-vespa 50 cc new license plates from 2004
The Evok magnetic license plate holder is designed with a specific internal housing for Apple® AirTag® (sold separately), ensuring a secure and discreet integration. This housing is carved within the structure, preserving the aesthetics of the license plate holder while providing an effective tracking solution.
Color: Glossy white
TECHNICAL DATA SHEET:
- Outer shell in thermoplastic
- Scratch-resistant paint
- Internal extra smoked visor
- Removable and washable cheek pads
- Micrometric closure
- Removable peak
- Anti-theft ring on the strap
KIT Black Sleeve by the Meter TEFLON for Vespa 50/90/125/150/160/180/200
All Models
With an internal Teflon tube that facilitates the sliding of the wire
External Diam. 5 mm
Internal Diam. 2.5 mm
Vespa 50/90/125 Primavera ET3 / PK
2-hole manifold
Flywheel side bearing 20x47x14
Ball bearing 25X52X15 SKF 6205/C4 engine casing Quattrini and Malossi for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Quattrini and Malossi engine casings
Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Clutch plate MALOSSI with thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL
Vespa 50/90/125
Malossi also thinks about the most hidden corners of the engine, as in the case of the thrust plate for Vespa Smallframe. If you are an experienced Vespa enthusiast, you certainly know that every time you pull the clutch lever, a brass pin cries from the effort.
At Malossi, we wondered how to solve the issue and responded with a new thrust plate for Vespa Smallframe that guarantees a longer lifespan for the pin, better lever feel, and greater efficiency.
Why choose the thrust plate for Vespa Smallframe
First of all, let's specify that the thrust plate is an accessory we recommend adding to our clutch for Vespa Smallframe, even though it is perfectly compatible with the original one.
Replacing the original Vespa plate with the Malossi one means saving the brass pin from sliding in its seat, effectively exponentially increasing its useful life.
The advantages don't end there because, with the Malossi thrust plate for Vespa Smallframe, the clutch disengagement is smoother, and gear changes are softer and more precise.
Features of the thrust plate for Vespa Smallframe
The original thrust plate is a single block, consequently, with
This hand cleaner paste is specifically designed to naturally remove paints, adhesives, glues, synthetic components, and other difficult-to-remove stains, thanks to the action of walnut powder. "Paint & Graffiti" removes all types of paints and petroleum-based product stains. It eliminates ink, toner, pen/marker, glue, adhesives, primer stains, and much more without using chemical or petroleum-based products that could be harsh on the skin. The essentially natural product contains water, walnut shells (produced by a tree commonly known as the soap tree), citrus-based cleaning agents, and six types of emollients that ensure excellent immediate results. A small portion of the product removes any type of dirt and odor, leaving a delicate citrus scent and providing extraordinary softness to the skin. • Easily removes paint, ink, pen marks, adhesives, and much more. • The most effective method to remove paint and petroleum stains from hands. • The product is 100% natural without the use of solvents. • Contains special emollients and conditioners. • 50% more effective than any other soap. • USDA Certified. 100% Natural • Uses washing nuts, the only natural abrasive in the world. • Uses only natural citrus fragrances.
The 107A is the reference model of the CGM brand, halfway between a
demi-jet and a jet, it is quite covering but at the same time
extremely compact and lightweight. Ergonomic and comfortable helmet, it is
made in two shell sizes in thermoplastic material to
offer optimal fit and wearing comfort for all
sizes. It is also equipped with a ventilation system with perforated interiors
with metal nets, visor with multi-click movement and with
bayonet fastening system. The interiors and cheek pads, made in soft and
soft hypoallergenic fabric, are also completely and easily
removable and washable.
Compact and lightweight demi-jet helmet with removable visor
with buttons, easy to store in the under-seat compartment due to its size.
ECE-R 22.05 APPROVAL
SIZES: XS (53-54cm), S (55-56cm), M (57cm), L (58cm), XL (59cm)
SIZES: (continued) L (58cm), XL (59cm)
AVERAGE WEIGHT SIZE M: 990 +/- 50gr
THERMOPLASTIC SHELL
SCRATCH-RESISTANT PAINT
VISOR WITH BUTTONS
REMOVABLE CHEEK PADS
MICROMETRIC BUCKLE
ANTI-THEFT RING ON THE STRAP
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the metal front air vents and the rear shell cuts that also house the air extractors. The thermoformed interiors, completely removable and washable, are equipped with a removable chin strap and neck collar with zip, and in all graphic variants, are embellished with vintage-style brown eco-leather details. The PIX can be equipped with a long visor for greater wind protection or with a modern-shaped visor, the interchangeable visors share the fastening system which, in the graphic versions, is made of metal. The helmet's equipment is completed by the micrometric buckle, the anti-theft ring, the strap holder elastic, and in the graphic variants, the rear goggle strap.
The 107A is the reference model of the CGM brand, halfway between a
demi-jet and a jet, it is quite covering but at the same time
extremely compact and lightweight. Ergonomic and comfortable helmet, it is
made in two shell sizes in thermoplastic material to
offer optimal fit and wearing comfort for all
sizes. It is also equipped with a ventilation system with perforated interiors
with metal nets, visor with multi-step movement and with bayonet
fastening system. The interiors and cheek pads, made of soft and
hypoallergenic fabric, are also completely and easily
removable and washable.
The 107A is the reference model of the CGM brand, halfway between
a demi-jet and a jet, it is quite covering but at the same time
extremely compact and lightweight. Ergonomic and comfortable helmet, it is
made in two shell sizes in thermoplastic material to
offer optimal fit and wearing comfort for all
sizes. It is also equipped with a ventilation system with perforated interiors
with metal meshes, visor with multi-click movement and bayonet
fixing system. The interiors and cheek pads, made of soft and
comfortable hypoallergenic fabric, are also completely and easily
removable and washable.
Engineered from its predecessor 107 FLORENCE, the 167 FLO
is the new benchmark for your urban journeys. Designed in 3
external shell sizes and a total of 8 sizes, it ensures maximum
fitting comfort combined with safety, lightness, and compact design.
Characterized by the interchangeability of the visor: long, for greater
wind protection or shaped, for a more captivating look.
It features the AIR STREAM SYSTEM ventilation system, hexagonal
thermoformed interiors with fully removable and washable ExtraCool fabric
with high visibility bands. The features are completed by the
anti-theft ring on the strap, the micrometric buckle, and the strap
retaining elastic.
ECE-R 22.06 APPROVAL
SIZES: XXS (51-52cm), XS (53-54cm), S (55cm), M1 (56cm),M2 (57-58cm), L (59cm), XL (60cm),
Gear/throttle pulley kit for Vespa 50/N/L/R/S/SR/90/R/125/PV/GT/GTR/Super/150 GL/Sprint/Veloce/Super/180 Rally/SS/200 Rally
Vespa 50 S V5SA1T > 67570
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T > 881915
Vespa 50 Sprinter V5SS2T
Vespa 90 V9A1T >122983
Vespa 90 Racer V9SS2T
Vespa 125 GT VNL1T>VNL2T (CH) (F)
Vespa 125 GT VNL1T>VNL2T 30001>
Vespa 125 GT R VNL2T
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Super VNC1T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce V
In galvanized steel, complete with stops and spacers
Engine Gasket Kit PREMIUM in Aramid for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Vespa 125 PK ETS
FASIT Material:
This material is a mixture of cellulose and synthetic fibers, asbestos-free, which ensures a very effective seal.
The same material is used to manufacture gaskets for modern engines.
All models / Tutti i modelli
Trapezoidal
Ø 100 mm
Stainless steel and polished aluminum
CONTINENTAL inner tube 3.00/10 - 3.50/10 for Vespa 125 Primavera ET3/GT/GTR/TS/PX-150 Sprint/Sprint V./PX-160 GS/180 SS/Rally-PE-Ape 50
Vespa 50 from '71
- Vespa 125 from '66
- Vespa 150 GS VS1>5T
- Vespa 160 GS VSB1T
- Vespa 180 SS VSC1T
- Vespa 180 Rally VSD1T
- Vespa 200 Rally VSE1T
- Vespa PE
Continental
90-degree valve
3.00/10-3.50/10
Inner Tube Vee Rubber 3.00/10 - 3.50/10 for Vespa 125 Primavera ET3/GT/GTR/TS/PX-150 Sprint/Sprint V./PX-160 GS/180 SS/Rally-PE-Ape 50
Vespa 50 from '71, Vespa 125 from '66, Vespa 150 from '66, Vespa 150 GS VS1>5T, Vespa 160 GS VSB1T, Vespa 180 SS VSC1T, Vespa 180 Rally VSD1T,
Vespa 200 Rally VSE1T, Vespa PE
3.00/3.50-10
90-degree valve
Vee Rubber