Spare parts and accessories for Vespa 125
Explore the largest online catalog of spare parts and accessories for Vespa 125, the beating heart of Piaggio's history. Whether you own a rare Vespa 125 Faro Basso or VNB, a legendary Primavera ET3, an elegant GT/GTR, or the timeless Vespa PX 125, here you will find everything you need for your restoration. Our selection covers every era: from the 'grandmothers' of the 1950s to Smallframe and Largeframe, offering high-quality mechanical components, electrical parts, and bodywork. Get your 125 back on the road with reliable and specific spare parts for each frame code.
Crimaz Easy 4-claw Cross (4 Speeds) 50.2 mm for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Rounded corner, height--> 50.2 mm
Crimaz 4-claw cruciform (4 Speeds) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Rounded corner, height--> 50.2 mm
4 claw cross 50.2 Benelli for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Height: 50.2 mm
Reinforced VMC cross (4 Speeds) 50.2 mm for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Rounded corner, height--> 50.2 mm
Reinforced Parmakit Cross for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Rounded corner, height--> 50.2 mm
Parmakit SP 09 CLASSIC Thermal Group - G.T Vespa ET3 - d.55 121cc for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Thermal Group Parmakit SP 09 - CLASSIC
PLUG & PLAY
- aluminum cylinder Ø 55 elliptical exhaust port
- nicasil lining
- fusion head with side spark plug hole
- Vertex piston with a steel ring
DIAMETER: 58
DISPLACEMENT: 135
PIN: 15
STROKE: 51
ROD: 97
TRANSFERS: 5
4-claw cross 50.2 Evok for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5SA1T 69444>
Vespa 50 Special V5B3T 94315>
Vespa 50 Special V5B4T 1514>
Vespa 125 Primavera VMA2T 150203>
Vespa 125 Primavera ET3 VMB1T 8161>
Vespa 125 PK ETS
Made of steel with specific heat treatments to ensure maximum durability over time. Thanks to a play-free coupling on the gear pin, it is possible to use a medium hardness spring; this solution ensures precise and smooth gear changes without requiring excessive effort. Furthermore, additional processes have been introduced on this model to optimize smoothness during gear engagement.
In the package, you will find a reinforced evok spring + 2 balls.
Parmakit Puffo Challenger Thermal Group - for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Thermal Group Parmakit "PUFFO Challenger"
Manifold Ø 30
- aluminum cylinder Ø 57 - nicasil-lined
- intake manifold Ø 30 mm
- "integral" head with side spark plug hole
- 4-petal reed valve
- Vertex piston with a single steel ring
- Vespa PK manifold with flow guide
DIAMETER: 57
DISPLACEMENT: 130
WRIST PIN: 15
STROKE: 51
CONNECTING ROD: 97
TRANSFER PORTS: 5
Thermal Group Parmakit ECV - VESPA - APE - Ø 57 130 cc for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Parmakit ECV Thermal Group
PLUG & PLAY
- aluminum cylinder Ø 57 elliptical exhaust port
- nicasil plated liner
- fusion head with lateral spark plug hole
- Vertex piston with a steel ring
DIAMETER: 57
DISPLACEMENT: 130
PIN: 15
STROKE: 51
ROD: 97
TRANSFERS: 5
Thermal Group Parmakit SP 09 EVO - G.T Vespa ET3 d.60 144cc b105 for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Thermal Group Parmakit SP 09 - EVO
- aluminum cylinder Ø 60 SPLIT EXHAUST PORT
- nicasil liner - “integral” head with lateral spark plug hole
- forged Vertex piston with a steel ring
DIAMETER: 60
DISPLACEMENT: 144
PIN: 15
STROKE: 51
TRANSFER PORTS: 5
ROD: 105
Parmakit SP 09 EVO Thermal Group - G.T Vespa ET3 d.60 SP09 EVO 144cc for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Thermal Group Parmakit SP 09 - EVO
- aluminum cylinder Ø 60 SPLIT EXHAUST PORT
- nicasil liner
- “integral” head with lateral spark plug hole
- forged Vertex piston with one steel ring
DIAMETER: 60
DISPLACEMENT: 144
PIN: 15
STROKE: 51
ROD: 97
TRANSFERS: 5
Complete thermal group Polini with RACING head (130 cc) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Brand: Polini
Bore: 57
Stroke: 51
Displacement: 130 cc
Cylinder base gasket in paper for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
M7 MD Racing nuts (4pcs) for VESPA stud bolts 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Special solid nuts for Vespa cylinder prisoners.
They have a height of 10mm compared to the 7mm of commercial ones.
Classic 11mm hexagon made from solid and a 13.8mm ring underneath to rest on a larger surface.
4 pieces
Thermal Group Parmakit ECV
PLUG & PLAY
- aluminum cylinder Ø 55 elliptical exhaust port
- nicasil coating
- fusion head with lateral spark plug hole
- Vertex piston with two steel rings
DIAMETER: 55
DISPLACEMENT: 121
PIN: 15
STROKE: 51
ROD: 97
TRANSFERS: 5
Polini Evolution 2 aluminum thermal group head D 58 central spark plug (long thread) for Vespa 50 Special/NLR/Primavera/ET3-Ape 50
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Parmakit Cast Iron Thermal Group Vespa ET3 d.57 -130cc Ape 50
Parmakit Cast Iron Thermal Group
PLUG & PLAY IN CAST IRON
cast iron cylinder Ø 57 elliptical exhaust port
aluminum head with side spark plug hole
Vertex piston with two steel rings
DIAMETER: 57
DISPLACEMENT: 130
WRIST PIN: 15
STROKE: 51
CONNECTING ROD: 97
TRANSFER PORTS: 5
Preloaded washers M7 MD Racing (4pcs) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150 studs
Vespa 50
Vespa 125
Vespa 150
Special harmonic steel washer kit with preload
specifications to compensate the play of thermal excursions of Vespa cylinder studs.
These washers are completely compressed at 1.3kgm (tightening of Vespa studs)
and compensate for the loosening of studs subjected to heating.
Dimensions:
inner diameter 7.5mm
outer diameter 16.8
thickness 1.8mm
washer height at rest 2.18mm
excursion approximately 0.38mm
thermal group bolt kit for Vespa 50-125/PV/ET3/PK50-125/S/X
Vespa 50-125/PV/ET3/PK50-125/S/X
Complete thermal group VMC SUPER G 2.0 for 2-Transfer crankcase (177 cc) in cast iron for Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
Vespa 125 VNB1>6T, Vespa 125 GT VNL1>2T, Vespa 125 GTR VNL2T, Vespa 150 VBB1>2T, Vespa 150 GL VLA1T, Vespa 150 Sprint VLB1T
The VMC SUPER G 2.0 is specifically designed for 2-port crankcases for Vespa Large Frame 125/150. This kit differs from the version for 3-port crankcases thanks to the use of a dedicated piston and specific adapter plate, designed to ensure correct assembly and the best performance on this configuration.
The kit stems from VMC's constant commitment to developing advanced technical solutions and using high-quality materials, with the aim of satisfying even the most demanding Vespa enthusiasts.
The shape of the ports at the base of the cylinder has been deliberately kept conservative, allowing for plug & play installation on original crankcases without the need for base machining. For those who wish to achieve superior performance, the ports can still be widened and matched, increasing the flow and improving the overall performance of the engine.
The cylinder also features an innovative exhaust design, developed after numerous studies and tests by the VMC team. This configuration optimizes the torque curve, offering progressive accelerations and a more lively ride. To maintain these characteristics unchanged, any modification to the exhaust shape is strongly discouraged.
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Ape AB
Complete original SIEM headlight for Vespa 125/150/200 PX-PE 2nd series Arcobaleno
Vespa 125 PX Rainbow
Vespa 150 PX Rainbow
Vespa 200 PE Rainbow
Vespa 125 T5
Size: 100x45 mm
black/aluminum
fastening: 2 pins
hole spacing: 80mm
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T>024899
Vespa 125 GT VNL1>2T>60899
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 Super VBC1T>70199
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T>73899
100% Made in Italy
Removes contaminant deposits from: butterflies, mono injectors, E.G.R. valves, carburetors. Ideal for cleaning external and internal parts. Cleans without the need for disassembly.
Specific for Vespa Faro Basso
Cable tie fastening
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 yellow - Vespa Smallframe
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing
Flat type cross with reinforced thread VMC for Vespa PX 125/150/200 Arcobaleno 2°/'98/MY/'11/T5/Cosa adaptable to LML Star 125-200 2T/4T/Deluxe 2T/4S
Vespa 125 PX VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 Cosa
Vespa 150 PX 624302>
Vespa 150 Cosa
Vespa 200 PE VSX1T 315267>
Vespa 200 Cosa
Reinforced Flat VMC Cross for Vespa large frame, PX '84, MY, T5, COSA
Made of special steel with related vacuum carburizing treatment with a surface hardness of 56/60 HRC
A chamfer has been machined on the corners of the cross ends to preserve the integrity of the gears and the selector
The cross has slightly increased dimensions compared to the original ones, which might require small adjustments to be made on the wheel axle before assembly.
Vespa PX
Vespa PE
Gas-pressurized rear shock absorber (Nitrogen) with separate compensation reservoir.
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PX, Vespa 150 PX, Vespa 200 PX, Vespa PX Arcobaleno
Rear Shock Absorber
ADJUSTMENT
The continuously adjustable millimetric ring for spring preload and the knob with clicks (12 clicks) for Compression damping adjustment allow you to customize the suspension setting according to your needs and riding preferences.
Bitubo adjustable front shock absorber for Vespa 50 N/L/R-Special-PK/90/125 Primavera ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Gas-pressurized shock absorber (Nitrogen) with separate compensation reservoir.
ADJUSTMENT
The continuously adjustable millimetric ring for spring preload, and the knob with clicks (12 clicks) for Compression damping adjustment, allow you to customize the suspension setting according to your needs and riding preferences.
Tapered needle carburetor Dell'orto for SI 20.15/17-20.20/24.24/26.26D/E/G/PHB Vespa 125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Vespa 125 from '59 (excluding Primavera ET3)
Vespa 150 from '59
Vespa 160
Vespa 180
Vespa 200
Square section
Tapered needle carburetor Dell'orto SHB/SHBC for Vespa 50/90/125/Primavera/ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Triangular section
All models/All models
Stainless steel screw kit with hex head for fan cover mounting for Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Kit consisting of 3 Mx10 screws
Stator fixing screw M5x12 mm for Vespa 50/90/125 Primavera-Ape 50 ET3/PK50-125/S/XL/XL2/ETS
Front carbon fender for Vespa 50/90/125 Special-N-L-R-Primavera-ET3 with PK fork (shock absorber on the right)
Vespa 50/90/125 Special-N-L-R-Primavera-ET3 with PK fork (shock absorber on the right)
Made from high-quality carbon fiber, it offers a glossy finish
(or matte at the customer's choice) provided by 3 layers of
UV-resistant clear coat. Where necessary, carbon/kevlar reinforcements are present to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Black windshield with black arms "Moto Nostra" for Vespa 125-150-200 PX-PE
Vespa PX
Vespa PE
Included: Brackets, screws and assembly instructions
Dimensions--> L 105mm, H 340mm