Spare Parts and Accessories for Vespa
Welcome to the Spare Parts and Accessories section of RDV Scootershop, the reference point for every scooter enthusiast. Explore a catalog of over 8,900 products dedicated to Classic Vespa (from the 50 Special to the PX), Modern Vespa, Ape, Lambretta, and Piaggio mopeds (Ciao, Si, Bravo). We offer a complete range from precision mechanics (cylinder kits, crankshafts, clutches) to bodywork, upholstery, and electrical systems. Find the best aftermarket and tuning brands (such as Malossi, Polini, DR, Pinasco) and original faithful spare parts for the restoration or maintenance of your vehicle.
Vespa 125 PX/PE
Vespa 125 Cosa
Shift selector rod for Vespa 125 VNA/VNB1-4/150 VBA/VBB1M 1°/VGLA
Vespa 125 VNA1>2T
Vespa 125 VNB1>4T
Vespa 150 VBB1M>1735
Vespa 150 VBA1T
Vespa 150 GL VGLA1T
Length-->86.70mm
Ø 16.9 mm
thread M7
Complete piston with deflector 150cc from diameter 57.00 to diameter 58.80 mm
Vespa 150 VL1>3T
Vespa 150 VB1T
By clicking on purchase, all available sizes will be displayed
Length-->79mm
Pin-->15x48.5x10mm
Compression-->30
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 Super VNC1T
By clicking on purchase, all available sizes will be displayed
Length-->70mm
Pin-->15x44x10mm
Compression-->35
Advanced crankshaft ZIRRI cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Valve type
Stand reinforcement plate for Vespa 125 VNB2-6/Super/GT/GTR/TS/150 VBB/Super/GL/Sprint/V./160 GS/180 SS/Rally
Vespa 125 VNB2-6/Super/GT/GTR/TS/150 VBB/Super/GL/Sprint/V./160 GS/180 SS/Rally
Size: 229x99mm
Thickness: 2mm
Top case mounting screws for plate for Vespa Primavera/Sprint/GTS/PX
Vespa Primavera/Sprint/GTS/PX
Length: 40mm
All models / Tutti i modelli
For tires 3.00x10, 3.50/10
Economy Version
Clutch thrust bearing for Vespa 125 V15T engine V22M>/ V30T>33T/VU1T/VM/VN1>2T/150 VL1>3T/VB1T/Ape AB1T>4T/AC1>3T/Pentaro
Vespa 125 V15T engine V22M>/ V30T>33T/VU1T/VM/VN1>2T/150 VL1>3T/VB1T/Ape AB1T>4T/AC1>3T/Pentaro
Vespa 50/125/150/200/250/300
DOT: 2016
Vespa 125 Granturismo
PLUM COLOR 146
Primary couple with extended DRT ratio (Z 22/62) for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 PX, Vespa 125 TS, Vespa 150 PX, Vespa 150 Sprint Veloce
For clutch 6 springs
Polini intake manifold with 3 holes d.30mm for Vespa 125 PK XL/N/HP/FL
Vespa 50 PK XL/N/HP
Vespa 125 PK XL/N/HP
Vespa 125 PK ETS VMS1T
Sleeve attack (diameter 34mm)
For carburetors PHBL PHBH -22 - 24 - 25 - 28
6-way socket connector stator wiring to bt plug for Vespa 50-125 PK/S/XL/N/HP/FL
Vespa 50-125 PK/S/XL/N/HP/FL
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 SS V5SS1>2T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 90 SS V9SS1>2T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Elastic strap for battery fastening for Vespa PX80-200 E-T5/Cosa Elestart/PX125-200 E '98/MY/'11/LML Star 125-200 2T/4T/Star
Vespa 50/100/125/150/200 PX PE PK
Pair of footrests for Vespa 125 VNB2T 09001->/VNB3-6/GT/GTR/Super/TS/150 VBB1T 17451->/VBB2T/GL/Sprint/V/160 GS/180 SS/Rally
Vespa 125 VNB3T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB1T 17451>
Vespa 150 VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBB2T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
20 mm
Vespa 50 PK XL V5X3T
Vespa 50 PK N
Vespa 100 PK XL
Vespa 100 PK XL
Vespa 125 PK XL
Vespa 125 PK XL Plurimatic
Kit composed of 5 pcs
Oil canister support - luggage rack for inner shield right and left side -MRP- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, e.g. Sprint, V50, Primavera, VNB, VBB etc.
Powder-coated black steel, very stable design Incl. rubber with which you can e.g. attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
Engine Gasket KIT -BGM Pro silicone- including o-rings for Vespa 50/90/125 Primavera ET3-Special
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Front shock absorber BGM Pro SC /F16 competition in black color for Vespa 80/125/150/200 PX-PE-LML
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Arcobaleno
With the Sport and Competition line, BGM Pro offers two series of high-quality shock absorbers in its product range. Both share perfect workmanship, high-quality materials, and ABE approval. The shock absorbers are very lightweight despite their high load capacity because they are made of high-strength CNC aluminum and have an exceptional hard anodized surface protection. The front shock absorbers are 15 mm shorter than standard shock absorbers, thus lowering the front of the vehicle. This benefits driving stability, top speed, and, not least, the aesthetic appearance. Additionally, the swing arm angle is reduced, which improves the damper response. The resulting larger wheel stabilizes handling at higher speeds.
Height--> 240 mm
RIPARO START outdoor cover in black polyester for scooter/vespa with top case and windshield
Note: For models with top box and windshield
Complete handlebars for Vespa V1-15/Hoffmann A/B/ACMA -> 3310
Vespa V1-15/Hoffmann A/B/ACMA -> 3310
Complete with levers and primary wand.
Complete clutch Fabbri Racing for CIF- 12R "SUPER RACING" for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VESPA SMALL FRAME: VESPA 50-90-125 PRIMAVERA-ET3-PK-PK XL
APE 50
SETUP SPRING CHOICE:
->6 large springs: for touring engines 10/12 hp: using 6 springs makes the clutch lever operation more comfortable
->12 springs: for engines up to 25 hp: using 12 springs ensures slip resistance
->18 springs: for engines over 30 hp: adding 6 small springs (CIF ART. 5569-MF) inside the 6 large ones.
NB: with the use of 18 springs, it is suggested to use a clutch cover with a rack-and-pinion clutch release to make the clutch softer)
TECHNICAL SPECIFICATIONS:
The clutch is composed of:
->Clutch basket made from solid steel
->6 springs diameter mm.14 in harmonic steel
->6 springs diameter mm.10 in harmonic steel
->Spring holder and closure disc made in an innovative alloy used on all Fabbri Racing clutches. This alloy ensures the
Pair of 150cc segments from diameter 57.8 to diameter 60 mm for Vespa 150 PX
Vespa P 150 X VLX1T
Vespa PX 150 E VLX1T
By clicking on purchase, all available sizes will be displayed
Thickness --> 2.5 mm
Main features:
Diameter: 63 mm
Elastic bands included
Vespa 125 VM1>2T
Vespa 125 VN1>2T
In metal, Aluminum color.
Elastic band segment QUATTRINI 72x1 for M232/244 cylinders Vespa 200 Rally/P200E/PX200 E/'98/MY/Cosa 200
Vespa 200 Rally/P200E/PX200 E/'98/MY/Cosa 200
Lamellar pack Quattrini engine crankcase "C1" for Vespa 50/90/125 Primavera ET3 / PK
Vespa 50/90/125 Primavera ET3 / PK
77x77x40 mm
incl. gaskets
4 valves without stop
Quattrini crankshaft (20 mm cone) for Vespa 50/125 Special-ET3-N-L-R-PK50 XL/XL2 to 125cc
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Round flywheels, stroke 51mm
Shoulders 87
Fits both bearings 20x47x14
Ideal for Quattrini M1B
Quattrini high-speed oil seal kit (24x35x7) for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Compatible with Carter Quattrini and Pinasco
Carbon rear light cover for Vespa 125/150/180 GTR-TS-Sprint V-Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint 0118590 >
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally
Vespa 200 Rally
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 50 PK/S/XL/Rush/N
Vespa 125 PKS/XL/Rush/N
Pre-welded crossbars
Dimensions: 60x43.3cm Sheet thickness: 10/10 (1 mm as Original)
Shield sheet metal for Vespa 125 Super-GT-GTR-TS/ 150 Sprint-Sprint Veloce
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Raw
Traversini NOT included
Vespa 125 VNB3T>VNB6T
Vespa 150 GS VS1T>VS3T
Vespa 150 VBA1T
Vespa 150 VBB1T>VBB2T
Vespa 125 V30>33T
Vespa 125 U VU1T (Utility)
Material: 40 NI Cr Mo 15 (Sim. Piaggio)
Piaggio top case in dragon red 894 for Vespa LX/S 50-150ccm/PX2011 125-150ccm
Vespa LX/S 50-150ccm/PX2011 125-150ccm
32 l
including mounting material, without backrest