VMC Quick Release Competition Brake Hose Kit with Quick Release for Hydraulic Disc Brakes
Original reference: VMC005603
The real innovation of this VMC kit is the Quick Release system, created by a leading company in brake hose production and based on the same principle used in racing motorcycles. Thanks to this system, it is possible to disconnect and reconnect the caliper or brake pump in seconds, without the need to bleed the system again each time.
A fundamental advantage for track use, especially during an endurance race or in pit stop operations between sessions, where every minute saved can make a difference. The system also ensures high sealing and reliability, without compromising on build quality.
The kit is equipped with a three-layer braided steel brake hose, the same used for some time in our brake hose kits. A high-quality solution, designed for those who demand maximum braking control on modified Vespa, MiniGP, pitbike, or high-performance scooters.
The stainless steel structure ensures a direct and constant transmission of braking force, offering a precise, clear, and repeatable command feel, brake after brake and stop after stop.
Product intended exclusively for track use.
The kit must be installed by competent personnel, strictly following the assembly instructions. Any
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Related articles
Crimaz handlebar disc brake master cylinder for Vespa 125 Primavera ET3/TS/Rally/GL/Sprint
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Vespa 50/125/150/200
Crimaz handlebar disc brake master cylinder for Vespa 50 Special V5B3T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
The kit is installed using the two mirror mounting holes, using the Crimaz braided tube it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz rear disc brake kit for Vespa Vespa 125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 125 GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Crimaz brake pedal for hydraulic brake Vespa 50 R 2°/S 3°/Special V5B3T 2° /90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80 -200/PE/Lusso/`98/MY/`11/T5
Vespa 50 V5A1T 914748>
Vespa 50 Special V5B3T 230536>
Vespa 90 V9A1T 184927>
Vespa 125 Primavera VMA2T 0192145>
Vespa 125 Primavera ET3 VMB1T 52721>
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa 50/125 PK
Crimaz handlebar disc brake master cylinder for Vespa 50 V5A1T N/L/R
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Disc brake master cylinder assembly Crimaz for handlebar (without pump) for Vespa 50 Special V5B3T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz disc brake master cylinder on the handlebar for Vespa 50/125 PK S-XL
Vespa 50-125 PK S-XL
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz handlebar disc brake master cylinder for Vespa 50 Special V5B3T
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Crimaz handlebar disc brake master cylinder for Vespa 80/125/150/200 PX-PE
Vespa 80/125/150/200 PX-PE
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (you just need to enlarge the fork exit hole).
Vespa 50 SS V5SS1T
Vespa 50 Sprinter V5SS2T
Vespa 90 SS V9SS1T
Vespa 90 Racer V9SS2T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Crimaz handlebar disc brake master cylinder for Vespa 125 T5 VNX5T
Vespa 125 T5 VNX5T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz disc brake master cylinder assembly at the handlebar (without pump) for Vespa ET3/TS/Rally/GL/Sprint
Vespa ET3/TS/Rally/GL/Sprint
The kit is installed using the two mirror mounting holes, and by using the Crimaz braided tube, it will be possible to install it in the original position (just widen the fork exit hole).
Crimaz disc brake master cylinder assembly at the handlebar (without pump) for Vespa 80/125/150/200 PX-PE
Vespa 80/125/150/200 PX-PE
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Crimaz disc brake master cylinder assembly at the handlebar (without pump) for Vespa 50/125 PK S-XL
Vespa 50-125 PK S-XL
The kit is installed using the two mirror mounting holes, and by using the Crimaz braided hose it will be possible to install it in the original position (just widen the fork exit hole).
Crimaz disc brake master cylinder assembly at the handlebar (without pump) for Vespa 50/90 SS
Vespa 50 SS V5SS1T
Vespa 50 Sprinter V5SS2T
Vespa 90 SS V9SS1T
Vespa 90 Racer V9SS2T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork outlet hole).
Crimaz disc brake master cylinder assembly at the handlebar (without pump) for Vespa 50 V5A1T N/L/R
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Complete Crimaz handlebar disc brake assembly (without pump) for Vespa 125 T5 VNX5T
Vespa 125 T5 VNX5T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz black brake pads replacement for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Crimaz gold brake pads replacement for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Replacement black SPORT Crimaz pads for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5
Dimensions: 51.50x40x6.80 cm
Polini brake pump on the handlebar (right) for Vespa 125 Primavera VMA1>2T-ET3-178.0103
Vespa 125 Primavera VMA1>2T-ET3
The kit is installed using the two mirror mounting holes.
Master cylinder with a diameter of 11 mm
Pompa freno Ottopuntouno VB-11 CNC Ø11mm per Vespa 50 Special V5B3T
Vespa 50 Special V5B3T
-Installazione Plug & Play: Si monta direttamente sui manubri a faro rettangolare (Vespa 50 Special) senza alcuna modifica strutturale.
-Estetica Perfetta: Il kit include la coppia di leve (destra per la pompa, sinistra a filo per la frizione) identiche nel design, per garantire continuità visiva e simmetria sul manubrio.
-Qualità Premium: Leve realizzate in alluminio ricavato dal pieno per massima resistenza e feeling di guida.
-Origine: 100% Made in Italy.
_Compatibilità: Vespa 50 Special (Faro Rettangolare).
-Raccordo Olio: Foro bullone M10x1.
-Regolazioni: Pompa dotata di vite per la regolazione del punto di frenata.
-Colorazioni disponibili: Argento / Nero.
Contenuto del Kit
-1x Corpo pompa freno.
-1x Leva freno ricavata dal pieno (CNC).
-1x Leva frizione a filo ricavata dal pieno (CNC) coordinata.
-Tutti gli accessori necessari per il montaggio e funzionamento.
⚠️ Avvertenze Legali e destinazione d'uso:
-Prodotti destinati esclusivamente alle competizioni.
-Limitazioni: Vietato l’uso su strada pubblica.
-Responsabilità: L'azienda declina ogni responsabilità per l’uso improprio del componente.
Pompa freno Ottopuntouno VB-11 CNC Ø11mm per Vespa 125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa 125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
-Installazione Plug & Play: Si monta direttamente sui manubri a faro rettangolare (Vespa 50 Special) senza alcuna modifica strutturale.
-Estetica Perfetta: Il kit include la coppia di leve (destra per la pompa, sinistra a filo per la frizione) identiche nel design, per garantire continuità visiva e simmetria sul manubrio.
-Qualità Premium: Leve realizzate in alluminio ricavato dal pieno per massima resistenza e feeling di guida.
-Origine: 100% Made in Italy.
_Compatibilità: Vedi elenco
-Raccordo Olio: Foro bullone M10x1.
-Regolazioni: Pompa dotata di vite per la regolazione del punto di frenata.
-Colorazioni disponibili: Argento / Nero.
Contenuto del Kit
-1x Corpo pompa freno.
-1x Leva freno ricavata dal pieno (CNC).
-1x Leva frizione a filo ricavata dal pieno (CNC) coordinata.
-Tutti gli accessori necessari per il montaggio e funzionamento.
⚠️ Avvertenze Legali e destinazione d'uso:
-Prodotti destinati esclusivamente alle competizioni.
-Limitazioni: Vietato l’uso su strada pubblica.
-Responsabilità: L'azienda declina ogni responsabilità per l’uso improprio del componente.
Front disc brake kit Dexter Racing (caliper color of choice) for Vespa 125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5
Vespa 125 GT/GTR/TS/150 GL/Sprint/V//Rally/TS
Front Disc Brake Kit with Integrated Anti-Dive System – Patented
For Vespa Rally, Sprint, GL, TS, GT (Traditional 10" Wheel)
Are you looking for the safety of modern braking without ruining the classic line of your Vespa? This kit represents the ultimate technological evolution for past Largeframe models. A new generation braking system that combines stopping power, handling, and safety on rough roads, drastically reducing the annoying front dive during braking.
Everything is engineered to maintain an absolutely original aesthetic appearance, well integrated with the vintage design: no visual compromise, just pure effectiveness.
🛠️ Applications and Compatibility
The kit is ready to install and specific for all Vespas with a traditional 10" wheel and fork of the same type, including:
Vespa 180 / 200 Rally
Vespa 150 Sprint / Sprint Veloce
Vespa 150 GL
Vespa 125 TS
Vespa 125 GT / GTR
And all models with equivalent wheel axle and front chassis.
💎 The Patented Innovation (System with Pat
VMC brake pump kit for Vespa 50/90/125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa 50/90/125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
VMC Brake Pump Kit + Coordinated Clutch Lever for Vintage Vespa
The new solution by VMC is finally available to bring disc brakes to the original vintage Vespa handlebars, without aesthetic compromises or adapted solutions.
After last year's preview, a fully integrated and specifically designed system for Vespa is hitting the market: not an adaptation of motorcycle pumps with external linkages, screws, and brackets, but a kit designed for a direct, clean, and definitive installation.
The project, born from an idea by Massimo Santinello, effectively solves the ergonomic and aesthetic issues typical of disc conversions on vintage models.
✅ Patented design and total integration
The VMC pump body directly replaces the original lever support on the handlebar, maintaining a line consistent with the Vespa style.
No external linkage or homemade system
Elimination of mechanical play typical of traditional kits
Precise and direct actuation
Clean and perfectly integrated aesthetics
🚀 Braking efficiency and maximum compatibility<
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black cover and aluminum levers for Vespa 50 Special V5B3T
Vespa 50 Special V5B3T
-Plug & Play Installation: Mounts directly onto handlebars with rectangular headlight (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and riding feel.
-Origin: 100% Made in Italy.
_Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: Bolt hole M10x1.
-Adjustments: Pump equipped with a screw for adjusting the braking point.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x Full CNC brake lever.
-1x Coordinated full CNC cable clutch lever.
-All necessary accessories for assembly and operation.
⚠️ Legal Warnings and intended use: 
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black cover and aluminum levers for Vespa 125/150/200 PX-PE
Vespa 125/150/200 PX-PE
-Plug & Play Installation: Mounts directly on handlebars with rectangular headlight (Vespa 50 Special) without any structural modifications.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and driving feel.
-Origin: 100% Made in Italy.
_Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for braking point adjustment.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x Solid brake lever (CNC).
-1x Coordinated cable clutch lever (CNC).
-All necessary accessories for installation and operation.
⚠️ Legal Warnings and intended use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black or orange cover and black levers for Vespa 125/150/200 PX-PE
Vespa 125/150/200 PX-PE
-Plug & Play Installation: Mounts directly on handlebars with a rectangular headlight (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left with cable for the clutch) identical in design, ensuring visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made from solid aluminum for maximum strength and riding feel.
-Origin: 100% Made in Italy.
_Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for brake point adjustment.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x CNC machined brake lever.
-1x CNC machined coordinated clutch lever with cable.
-All necessary accessories for assembly and operation.
⚠️ Legal Warnings and Intended Use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The company declines
Evok Iron Brake Pump By 8.1 P-11 CNC Ø11 mm black or orange cover and black levers for Vespa 50/125 PK S-XL-N
Vespa 50/125 PK S-XL-N
-Plug & Play Installation: Mounts directly on handlebars with a rectangular headlight (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and driving feel.
-Origin: 100% Made in Italy.
_Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for brake point adjustment.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x Solid CNC brake lever.
-1x Coordinated solid CNC clutch cable lever.
-All necessary accessories for installation and operation.
⚠️ Legal Warnings and Intended Use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The company declines any responsibility
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black cover and aluminum levers for Vespa 50/125 PK S-XL-N
Vespa 50/125 PK S-XL-N
-Plug & Play Installation: Mounts directly on handlebars with rectangular headlight (Vespa 50 Special) without any structural modifications.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left with cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made from solid aluminum for maximum strength and riding feel.
-Origin: 100% Made in Italy.
_Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for brake point adjustment.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x CNC solid brake lever.
-1x Coordinated CNC solid cable clutch lever.
-All necessary accessories for installation and operation.
⚠️ Legal Warnings and Intended Use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The company disclaims all
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black or orange cover and black levers for Vespa 125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa 125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
-Plug & Play Installation: Mounts directly on handlebars with rectangular headlight (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and driving feel.
-Origin: 100% Made in Italy.
_Compatibility: See list
-Oil Fitting: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for adjusting the braking point.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x Solid brake lever (CNC).
-1x Coordinated solid cable clutch lever (CNC).
-All necessary accessories for installation and operation.
⚠️ Legal Warnings and Intended Use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The company declines all
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black cover and aluminum levers for Vespa 125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa 125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
-Plug & Play Installation: It mounts directly on handlebars with rectangular headlights (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left with cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and riding feel.
-Origin: 100% Made in Italy.
_Compatibility: See list
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for brake point adjustment.
-Available colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x Solid brake lever (CNC).
-1x Matching solid cable clutch lever (CNC).
-All necessary accessories for installation and operation.
⚠️ Legal Warnings and intended use:
Complete DEXTER brake pump kit for Vespa 50/90/125 Primavera/ET3/GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Vespa GT/GTR/Super/TS/150 Sprint/Sprint V/GL/Super/180SS/Rally
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black or orange cover and black levers for Vespa 50 Special V5B3T
Vespa 50 Special V5B3T
-Plug & Play Installation: Mounts directly on handlebars with rectangular headlight (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and riding feel.
-Origin: 100% Made in Italy.
-Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for adjusting the braking point.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x CNC solid brake lever.
-1x Coordinated CNC solid cable clutch lever.
-All necessary accessories for assembly and operation.
⚠️ Legal Warnings and intended use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The company declines all responsibility for