Vespa 150 PX Disc Brake
Black color. The "Termowarm" electric leg warmer panel is powered by a Power Bank and has a heating duration of about 1.5 hours (with a 5000 mAh power bank).
- Electric leg warmer panel
- Compatible with the Termoscud storage pocket
- Powered by a Power Bank (not included) with a minimum capacity of 5000 mAh (5V/2A)
- High tenacity Oxford nylon exterior
- Internal aluminum layer to reflect heat towards the legs
- Back side in Aero 3D mesh to evenly distribute heat
- On/Off power button
- Power bank pocket
- Heating duration depending on battery power (approx. 1.5h with 5000 mAh)
VMC tubeless aluminum rim in polished aluminum color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-mounted valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
100% synthetic high-performance lubricant specific for 2-stroke engines.
Very useful built-in measuring cup.
Vespa 50/90/125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Piaggio Gear 4th Gear 35 Teeth for Vespa PX150-200 E Lusso 2°/'98/MY/'11/Cosa 150-200
Vespa PX150-200 E Lusso 2°/'98/MY/'11/Cosa 150-200
Front luggage rack Cuppini in black with headlight holder (not included) for Vespa 125/150/180/200 Sprint-GL-PX-Rally180, Vespa Rally200, TS125, GT125, GTR125-/-PE
Vespa 50/90/125/150/160/180/200
Product 100% Made in ITALY
Cuppini front luggage rack in white with headlight mount (not included) for Vespa 125/150/180/200 Sprint-GL-PX-Rally180, Vespa Rally200, TS125, GT125, GTR125-/-PE
Vespa 125/150/160/180/200
100% Made in ITALY Product
Front optical group with Led Grabor "original version" for Vespa PX80-200/PE/Lusso/'98/MY/'11
Vespa PX80-200/PE/Lusso/'98/MY/'11
The LED projector has a brightness three times higher than an original PX optical group (1300 lumens). The power consumption is only 20 W. This corresponds to the luminous efficiency of a conventional 100 Watt spotlight.
Warning: the high beam is very weak compared to the low beam
All models
Valid for the mounting of one tire on a tubeless rim
By purchasing "TIREMOUNTING", a tire and a tubeless rim, you will receive the tire directly mounted on the rim at home. (for two rims/tires, purchase two "TIREMOUNTING")
VMC Tubeless 2.0 Easy Fitting aluminum rim in dark gray color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly easier, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical measure that makes a difference especially in practice, where mounting a tire can prove to be long, tiring, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making the assembly accessible even to those who do not have daily experience with
VMC Tubeless 2.0 Easy Fitting aluminum rim in Aluminum Grey color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly simpler, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is found inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical feature that makes a difference especially in practice, where mounting a tire can be long, tiring, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making the assembly accessible even to those who do not have daily experience with this
VMC Tubeless 2.0 Easy Fitting aluminum rim in black color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly simpler, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is found inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical feature that makes a difference especially in practice, where mounting a tire can prove to be long, laborious, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making assembly accessible even to those who do not have daily experience with
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
Original Piaggio air filter for Vespa 125/150 PX-Sprint-rally
Vespa 125 PX VNX1M> 2M
Vespa 125 TS VNL3M
Vespa 125 Cosa VNR1>2T
Vespa 150 PX VLX1M
Vespa 150 Sprint Veloce VLB1M
Vespa 150 Cosa VLR1T
Vespa 180 Rally VSD1T
SIP "Classic" bag/suitcase, large for luggage rack in olive green
480x300x270 mm
approx. 35 l
canvas
olive green
with lock
Large bag, for luggage rack,
480x300x270 mm,
Capacity 35l
Color black
Practical multi-pocket bag
Mounting on spare wheel for 8 and 10 inch wheels
Quick Throttle Disc pulley for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush
Vespa 50 PK N
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Vespa 125 T5
Ø 50 mm
aluminum, CNC milled
silver anodized
short stroke, with hollow bushing
Brake pedal protection Vespa 50 R 2°/S 3°/Special V5B3T 2°/90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa 50 V5A1T 914748 >
Vespa 50 Special V5B3T 230536 >
Vespa 90 V9A1T 184927 >
Vespa 125 Primavera VMA2T 0192145 >
Vespa 125 Primavera ET3 VMB1T 52721 >
Vespa 90 V9B1T 5363 >
Vespa PX
Vespa PE
Vespa PK
50x38x24 mm
Shockproof brake pedal gasket for Vespa 50 R 2°/S 3°/Special V5B3T 2°/90/125 Primavera 2°/ET3 2°/PK50/125/S/XL//PX80/125/150/200/PE/T5/'98/MY/'11
Vespa 50 V5A1T 914748>
Vespa 50 Special V5B3T 230536>
Vespa 90 V9A1T 184927>
Vespa 125 Primavera VMA2T 0192145>
Vespa 125 Primavera ET3 VMB1T 52721>
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa 50/125 PK
Prisoner for drum Vespa 50 N/L/R-Special-90-125 Primavera-PX-Sprint-GT-GTR-TS-Rally-SS
Vespa 50/90/125/160/180/200
Measurements: M 8 x L 30 mm
Upper ring for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 VM/VN/VNA-TS/150 VL/VB/GS/VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11
Galvanized
Upper steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Vespa 125/150/200 Cosa
Complete
Lower steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete with dust washer
Spacer buffer for fender mounting premium version Ø 18x6.4x5 mm for Vespa 50/90/125/150/200
All models - Tutti i modelli
Kit 5pcs elastic safety washer rim SIP (tubeless) M8 mm Ø 13.5x8.7 mm (thickness): 2.5mm, type NLX8, NORD-LOCK for SIP tubeless rims
Vespa 50/80/90/125/150/160/180/200
Smoked front and rear light body kit SIP for Vespa 125/150/200 PX-PE
Vespa PX 80
Vespa PX 80 E Arcobaleno
Vespa PX 100
Vespa PX 100 Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Arcobaleno
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Arcobaleno
Vespa P 200 E
Vespa P 200 E Arcobaleno
Vespa 125 PK S VAM1T Automatic
Glass: colored black
without bulbs
without gasket
Approval: with E number
Bushing kit, buffers, hood caps for Vespa 125/150/200 PX-PE-T5
Vespa 125 PX T5
Vespa 125 PX VNX2T
Vespa 150 PX VLX1T
Vespa 200 PX VSX1T
Vespa 200 PX Rainbow
Rear luggage rack traveler CUPPINI for Vespa 80/125/150/200 PX-PE-Arcobaleno
Vespa PX, Vespa PE
luggage rack 43x25 cm
chrome
foldable
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Vespa PX
Vespa PE
Vespa PX Rainbow
Vespa PE Rainbow
5 Faston original Piaggio voltage regulator for Vespa 125/150/PE/PX200E /Luxury/T5/2011
Vespa 125/150/PE/PX200E /Lusso/T5/2011
SKF wheel hub bearing 6204-C5 20x47x14 mm for Vespa 50/90/125/150/200
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Vespa 150 GS VS5T
Vespa 150 VB1T
Vespa 180 Rally VSD1T
Vespa PX/PE
Measurements: 20x47x14 mm
Needle roller bearing kit for multiple gear shaft for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/180-200 Rally/PX125-200/PE/Lusso/Cosa/T5
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 125 PX VNX1>2T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
2x11.8 mm
21 pieces
Roller bearing gearbox shaft 28x35x13 mm for Vespa 125 GT 2°/GTR/Super 2°/TS/150 GL 2°/Sprint 2°/V/Super 2°/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Super VNC1T 024900>
Vespa 125 GT VNL1T 60900>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 PX T5
Vespa 150 Super VBC1T 70200>
Vespa 150 Sprint VLB1T 73900>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Measurements: 28x35x13 mm
Nadella Bearing Crankshaft for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm
Insulating cap Low voltage socket for Vespa P125-150X/S/P200E/PX80-200 E/Lusso/Cosa/T5
Vespa PX
Vespa PE
All models / Tutti i modelli
Complete thermal group BGM PRO 177/187 cc (also for Elestart/electric start) side spark plug for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
The BGM PRO 177cc is an improved and more powerful version of the proven BGM177 cylinder for Vespa PX125/150, now also compatible with models equipped with electric start.
Everyday Performance
The BGM177 cylinder is designed to offer high performance, durability, and reliability for daily use. By replacing the original cylinder, it is possible to double the power of the standard 125cc engine, with generous torque that allows for smooth riding. The cylinder can also be configured to reach over 20 HP, provided it is paired with the right carburetor, exhaust, and crankshaft. It is therefore an ideal solution for beginners who want to expand performance in the future.
With a displacement of 177cc, the BGM PRO 177 cylinder ensures a safe and relaxed riding experience, maintaining the same reliability and durability as a 200cc engine, operating in the same RPM range as a standard engine. It also offers low fuel consumption and good range. It is compatible with standard components, requiring only a small adjustment of the carburetor jet and spark plug.
Main Features
Material: