Spare Parts Vespa 50 PK V5X1T
Explore our range of spare parts for Vespa PK 50 and PK 50 S (frame V5X1T). Heir to the Special, this 1980s Vespa requires specific components: from electronic ignition (control unit and stator) to the squared bodywork. Find thermal groups, 4-speed clutch kits, indicators and original plastics to keep the "Eighties" charm of this modern classic intact.
Black color. The "Termowarm" electric leg warmer panel is powered by a Power Bank and has a heating duration of about 1.5 hours (with a 5000 mAh power bank).
- Electric leg warmer panel
- Compatible with the Termoscud storage pocket
- Powered by a Power Bank (not included) with a minimum capacity of 5000 mAh (5V/2A)
- High tenacity Oxford nylon exterior
- Internal aluminum layer to reflect heat towards the legs
- Back side in Aero 3D mesh to evenly distribute heat
- On/Off power button
- Power bank pocket
- Heating duration depending on battery power (approx. 1.5h with 5000 mAh)
VMC tubeless aluminum rim in polished aluminum color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-mounted valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
Valvola gas Dell'orto (45) carburatore PHBH per Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Per carburatore PHBH
Dischi frizione Fabbri Racing FB 36 / FB 45 per Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
4 dischi sinterizzati carbonio, 3 infradischi
100% synthetic high-performance lubricant specific for 2-stroke engines.
Very useful built-in measuring cup.
Complete aluminum thermal group VMC Type R (114 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50
VMC has designed this kit to bring a breath of fresh air compared to the competition
The TYPE-R 58 is a cylinder with modern duct fluid dynamics designed to develop substantial torque already at low and medium revs
The perfect cylinder to liven up Piaggio Ape and Vespa 50 engines
Thermal group kit in aluminum with high-quality Nikasil coating for a total displacement of 114cc
The kit fits on "short" stroke crankshafts 43 mm, bore diameter 58mm, 6 transfers, Phases approximately 124°-172°
Exhaust outlet diameter 28mm, Exhaust stud spacing 52mm
Cast aluminum head with side long-thread spark plug
The kit includes 4 m6 Allen screws for better head fastening and 4 m7 studs specific for the cylinder
which eliminate the inconvenient fastening system typical of other short-stroke cylinders for smallframe Vespa on the market.
Fabbri racing polygonal clutch bell for Vespa 50/90/125 Primavera ET3-PK/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
In Tempered Steel
For Fabbri Racing Clutches
Electronic ignition EVOK (cone 20 kg.1.4) for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition EVOK with variable advance cone Ø20mm. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the weights of the same are machined from solid, perfectly balanced and galvanized. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - Flywheel 1400g - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - Flywheel puller 28x1 mm - Coil fixing plate - Spark plug cap - Small parts kit 7 sales plus - Plug and play, everything necessary for assembly is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour Whatsapp hotline for assistance and consultation for specific adjustments on request - Fan color gray as original to avoid problems during revision or historical register registration - Inclination notches for advance adjustment - Rotor approximately 1.4kg, for +30% extension.
Electronic ignition EVOK (cone 19 kg.1.4) for Vespa 50/90/125 Primavera ET3/PK50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
EVOK electronic ignition with variable advance Ø19mm cone. Thanks to the larger cooling fan, the airflow for cooling is 25% higher than the original fan. The rivets applied during the assembly phase of the flywheel are reinforced and ensure exceptional reliability, the flywheel weights are made from solid material and are perfectly balanced and zinc-coated. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit comes with everything needed for installation.
- 1400g flywheel - Larger cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit
7 sales plus points - Plug and play, everything needed for installation is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour WhatsApp helpline for assistance and consultation for specific adjustments upon request - Fan color gray like the original to avoid issues during inspection or historical register registration - Inclination marks for advance registration - Rotor approximately 1.4kg, for +30% extension.
Vespa 50 PK/S/XL/N/HP
Vespa 125 PK/S/XL/N/HP/ETS
In galvanized steel
Vespa 50 Special V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
3.00X10
Included: M8 nuts and grover washers
Sheet metal as thick as the original
Vespa 50/90/125/150/180/200
Measurements--> Blind hole with diam. 17 mm, length 100 mm
Primary transmission pair Polini Evolution straight teeth Z 24x72 (3.00) for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Transmission ratio: Z24/72 = 3.00
Street / Road configuration, designed for road engines.
Bell and shock absorber: Reinforced bell, shock absorber with high-strength springs.
Primary pinion: traditional fastening system.
All models
Valid for the mounting of one tire on a tubeless rim
By purchasing "TIREMOUNTING", a tire and a tubeless rim, you will receive the tire directly mounted on the rim at home. (for two rims/tires, purchase two "TIREMOUNTING")
VMC Tubeless 2.0 Easy Fitting aluminum rim in dark gray color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly easier, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical measure that makes a difference especially in practice, where mounting a tire can prove to be long, tiring, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making the assembly accessible even to those who do not have daily experience with
VMC Tubeless 2.0 Easy Fitting aluminum rim in Aluminum Grey color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly simpler, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is found inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical feature that makes a difference especially in practice, where mounting a tire can be long, tiring, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making the assembly accessible even to those who do not have daily experience with this
VMC Tubeless 2.0 Easy Fitting aluminum rim in black color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly simpler, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is found inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical feature that makes a difference especially in practice, where mounting a tire can prove to be long, laborious, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making assembly accessible even to those who do not have daily experience with
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
SIP "Classic" bag/suitcase, large for luggage rack in olive green
480x300x270 mm
approx. 35 l
canvas
olive green
with lock
Large bag, for luggage rack,
480x300x270 mm,
Capacity 35l
Color black
Practical multi-pocket bag
Mounting on spare wheel for 8 and 10 inch wheels
Quick Throttle Disc pulley for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush
Vespa 50 PK N
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Vespa 125 T5
Ø 50 mm
aluminum, CNC milled
silver anodized
short stroke, with hollow bushing
Rivet for fuel tank cap fastening for Vespa 50-200 V50/PV/ET3/PK/S/VNA-T4/Super/TS/GT/GTR/Sprint/V/Rally/SS180/PX
All models
Measurements: Diam. 3 mm, L 40 mm
Premium rubber fuel tank cap gasket for Vespa 50/90/125 N-L-R-Special-Primavera-ET3
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Size: Ø i 27.7 mm
Material: Viton
Made in Italy
Brake pedal protection Vespa 50 R 2°/S 3°/Special V5B3T 2°/90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa 50 V5A1T 914748 >
Vespa 50 Special V5B3T 230536 >
Vespa 90 V9A1T 184927 >
Vespa 125 Primavera VMA2T 0192145 >
Vespa 125 Primavera ET3 VMB1T 52721 >
Vespa 90 V9B1T 5363 >
Vespa PX
Vespa PE
Vespa PK
50x38x24 mm
Shockproof brake pedal gasket for Vespa 50 R 2°/S 3°/Special V5B3T 2°/90/125 Primavera 2°/ET3 2°/PK50/125/S/XL//PX80/125/150/200/PE/T5/'98/MY/'11
Vespa 50 V5A1T 914748>
Vespa 50 Special V5B3T 230536>
Vespa 90 V9A1T 184927>
Vespa 125 Primavera VMA2T 0192145>
Vespa 125 Primavera ET3 VMB1T 52721>
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa 50/125 PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
In Tempered Steel
Prisoner for drum Vespa 50 N/L/R-Special-90-125 Primavera-PX-Sprint-GT-GTR-TS-Rally-SS
Vespa 50/90/125/160/180/200
Measurements: M 8 x L 30 mm
Primary transmission pair Z27x69 (2.56) with straight teeth and shock absorber for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2- Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Z 27 X 69 with straight teeth and shock absorbers
Vespa 50 V5a1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Note: Original Piaggio
SIP PERFORMANCE Engine Gasket KIT for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Aramid
black
rubberized
incl. o-rings
Complete Polini clutch with WAVE spring for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Elastic ring clutch pack tightening for Vespa 50/90/125 N/L/R-Special-PK-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK S,XL
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
In Harmonic Steel>
Upper ring for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 VM/VN/VNA-TS/150 VL/VB/GS/VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11
Galvanized
Upper steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Vespa 125/150/200 Cosa
Complete
Lower steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete with dust washer
Spacer buffer for fender mounting premium version Ø 18x6.4x5 mm for Vespa 50/90/125/150/200
All models - Tutti i modelli
Kit 5pcs elastic safety washer rim SIP (tubeless) M8 mm Ø 13.5x8.7 mm (thickness): 2.5mm, type NLX8, NORD-LOCK for SIP tubeless rims
Vespa 50/80/90/125/150/160/180/200
Front suspension pin washer for Vespa 50/90/125 PK-Special-N/L/R-Primavera-Primavera ET3
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/ XL
M12 mm Ø 12.2mm/21.1 mm (thickness): 2.5mm