Classic Vespa
Ducati ignition pick-up for Vespa 125 Primavera ET3-T5-PX-150/200 PE-Rally
Vespa 125 PX T5 VNX5T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX VNX2T
Vespa 150 PX VLX1T 345649>
Vespa 200 PE VSX1T 300000>
Vespa 200 Rally VSE1T 0033997>
Vespa PK
Luminous body with grey canopy for Vespa 125 GTR VNL2T/125 TS VNL3T/150 Sprint 0118590 > /Sprint Veloce VLB1T
Vespa 125 GTR VNL2T Vespa 125 TS VNL3T Vespa 150 Sprint 0118590 > Vespa 150 Sprint Veloce VLB1T Vespa 180 Rally Vespa 200 Rally
Gray roof
– half-finger glove in genuine sheepskin
– aero 3D mesh insert on the back
– ergonomic shape
– easy to remove
– short cut on the wrist
– velcro adjustment on the wrist
Gas valve/throttle SIP 4.2 carburetor 24-24 for Vespa 200 PE-Rally
Vespa 200
For SI 24-24 carburetors
CNC machined
The throttle valve limits the air flow to the engine. Its degree of opening is determined by the rotation of the throttle grip. The more open it is, the more air can flow. Some butterflies are equipped with air pockets at the top and cutaways at the bottom. These add extra air to the fuel mixture, reducing its volume. Sliders with a flat bottom do not add extra air and are therefore ideal for compensating for a too lean midsection.
Sliders with two additional air pockets are mounted on the SI carburetors currently supplied to meet the exhaust values required by the new PX. However, these slides reduce the mixture to such an extent that tuned engines may experience problems ranging from partial load ringing to piston sticking. The solution to the problem: simply replace the installed throttle valve with a
Black Cuppini luggage rack for Vespa 50 N/L/R-Special-90/125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Lower fastening by means of tie rods
Measurements--> 32x24 cm32x24 cm
Vespa PX
Vespa PE
Black background, chrome frame, scaled to 120 KM/H
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa PX disc brake
Rear brake cam Evok with adjuster for Vespa PK50-125/S/XL/XL2
Vespa PK50-125/S/XL/XL2
EVOK Rear Brake Cam for Vespa PK and Smallframe
EVOK rear brake cam from the "Special Adjustment" series, designed for Vespa PK and Smallframe models. Allows the use of the brake cable with threaded rod type Vespa T5, enabling more precise and easier adjustment compared to the traditional clamp system.
Made of high-strength case-hardened steel with anti-wear treatment, it guarantees reliability, durability, and a smoother braking action over time. Ideal for replacing worn components that can compromise the modulatability and efficiency of braking.
Features:
Compatible with Vespa PK and Smallframe
Prepared for brake cable with threaded rod type T5
Micrometric adjustment of cable tension
High-strength case-hardened steel
Greater reliability compared to the traditional clamp system
Simple and immediate installation
Package contents:
1 EVOK rear brake cam
2 threaded clamps with adjustment nut
Mounting advice: apply high-temperature grease to the contact surfaces to ensure optimal smoothness and greater component longevity.
Engine compartment door for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Black
Odometer scale 120 km/h for Vespa 50 N/L/R/ Piaggio Ciao-Si-Bravo
Vespa 50 V5A1T N L R
Background color White, scaled to 120 KM/H
Modified manifold for Simonini Down under Carbon expansion mounting on Vespa 50 N-L-R
Simple and intuitive interface with 3 buttons
Use without App
Functions: Music & GPS - Calls
Communication up to 2 riders
Bluetooth Version: 5.2
Range up to 500 meters
Duration: 12 hours with background music - 8 hours of conversation
Waterproof IP65
Voice commands
Vespa PX
Vespa PE
Vespa 125 T5
Color:Black
Dust cover brake shoes budget version for Vespa 125/150/200 PX-T5
Vespa PX
Vespa PE
Vespa 125 T5
Color:GRAY
Vespa 50/90/125/150/200 PX-Special
P&A gray profile kit for Vespa 125 V1-33/VN/VM/VNA/VNB/150 VB1T/VBA/VBB/VL1-3T/GS VS1-5
Vespa 125 V1T > V15T
Vespa 125 V30T > V33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 GS VS1T > VS5T
Color: Gray
Kit for a Vespa (270 cm )
VMC Quick Release Competition Brake Hose Kit with Quick Release for Hydraulic Disc Brakes
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
The real innovation of this VMC kit is the Quick Release system, created by a leading company in brake hose production and based on the same principle used in racing motorcycles. Thanks to this system, it is possible to disconnect and reconnect the caliper or brake pump in seconds, without the need to bleed the system again each time.
A fundamental advantage for track use, especially during an endurance race or in pit stop operations between sessions, where every minute saved can make a difference. The system also ensures high sealing and reliability, without compromising on build quality.
The kit is equipped with a three-layer braided steel brake hose, the same used for some time in our brake hose kits. A high-quality solution, designed for those who demand maximum braking control on modified Vespa, MiniGP, pitbike, or high-performance scooters.
The stainless steel structure ensures a direct and constant transmission of braking force, offering a precise, clear, and repeatable command feel, brake after brake and stop after stop.
Product intended exclusively for track use.
The kit must be installed by competent personnel, strictly following the assembly instructions. Any
Pair of smoked rear light bodies (right and left) SIEM for Vespa 50/125 PK XL-N-Plurimatic-FL2-Rush
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK N FL1 from 1989
Vespa PK 50 N Speedmatic (FL1) from 1989
Vespa PK 50 FL2 from 1990
Vespa PK 50 Rush
Vespa 125 PK XL
Smoked
Front shock absorber YSS for Vespa 50/125 Special-PK-Primavera
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK
Color: Black body and spring
Gas OLEOpneumatic with hardness adjustment via ring
Front spare wheel support jerry can holder (Hunersdorff "fuel friend") -MRP- for Vespa Smallframe, Largeframe 10 inch
Vespa Smallframe, Largeframe 10 inch
Rear shock absorber support for Vespa V1-15/Hoffmann A/B/ACMA -> 3310
Vespa V1-15/Hoffmann A/B/ACMA -> 3310
M9 mm
SIP puller for flywheel side crankshaft bearings for Vespa 50 1° V5A1T -> 92876/S 1° V5SA1T -> 15324/90 1° V9A1T -> 25000
Vespa 50 1° V5A1T -> 92876/S 1° V5SA1T -> 15324/90 1° V9A1T -> 25000
BGM Classic Tire 3.50/8 46P 150 km/h for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
3.50/8
Black
Front Wheel Hub Fa Italia for Vespa PX 125/150/200E 2°/T5 for Vespa PK50-125/XL/XL2/Automatic
Vespa 125 PX Rainbow
Vespa 150 PX Rainbow
Vespa 200 PX Rainbow
In Aluminum, complete with bearings.
Vespa 50 PK V5X1T (D)
Vespa 50 PKS Elestart V5X2T (D)
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa PK 80 S Automatic VA81T
Vespa PK 80 S V8XST
Vespa 100 PK XL V9X2T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa PK 125 S Automatic VAM1T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 PK Automatic VVM2T
Note--> Complete with bearings
Pair of right and left engine crossbar buffers for Vespa 160 GS/180 SS/180 Rally/200 Rally 1st series
Vespa 160 GS
Vespa 180 SS
Vespa 200 Rally
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK/S/XL
Gas oleo-pneumatic, spring preload adjustment via ring nut, black body and spring
Spaco Carburetor Lic. Dell°rto SI 24 -24 E for Vespa 200 Rally/P200E/PX200 E/Lusso
Vespa 200 PX
Vespa 200 PE
Calibration-->160-BE3-118 min 160-55
Valve: 04
30X40 cm
Embossed image
Metal sign with Vespa motif 300x400 mm - Iconic Vespa since 1946 blue/white
Sip speedometer scaled to 140 Km/h for Vespa 50 Special V5A2>3T/V5B1>4T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Black background, scaled to 160 KM/H
Pair of -ARIETE- brown footrests for Vespa 50 Special V5B3T-125 Primavera ET3
Vespa 50 V5A1T R 789905>
Vespa 50 Special V5A2T 77696>
Vespa 50 Special V5B1T>3T
Vespa 50 Special Elestart V5A3T 5308>
Vespa 50 Special V5B4T
Vespa 90 V9A1T 57855>
Vespa 125 Primavera VMA2T 52767>
Vespa 125 Primavera ET3 VMB1T
Ø 20 mm
Material: rubber
chestnut brown RAL 8015
Complete shock absorber -CARBON- for Vespa 50/125 Special-PK-Primavera
Vespa 50 V5A1T L (adaptable / Adaptable Vespa 50 V5A1T N,R)
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1>4T
Vespa 50 V5SS1T
Vespa 50 PK S
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 90 V9SS1T
Vespa 125 Primavera VMA1T>2T
Plastic sheath in gray color
100% Made in Italy
Register M6 x 14mm (Øint.=6.7mm, thread pitch 0.75) with locknut - (used for carburetor bowl/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa
Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa
SIP extractor for flywheel side crankshaft bearing/gear selector shaft bearing for Vespa PX80-200/PE/Lusso/Cosa
29/40 mm
1 extractor, 4 parts, S45C
Crimaz elastic engine crossbar buffers for Vespa V50/V90/SS50/SS90/125- ET3/PK S/PK XL
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Born for the soft use of the Vespa, they reduce the elastic effect of the
traditional rubber support ensuring excellent driving comfort. The elastic joints are contained by a cup made
of acetal resin that further dampens vibrations
without compromising wheel alignment.
The central stainless steel shaft is fixed to the frame with 2 M10 screws replacing the original through bolt.
Designed for Quattrini engine casings, they are compatible with Piaggio engine casings. Check the seat size, it must not exceed diam.
39.25mm
GRIMECA drum, NT front brake disc for Vespa PK50-125/S/SS/XL/XL2/Automatic/P200E 2°/PX80-150E 2°/Lusso/'98/MY/'11/T5
Vespa PK50-125/S/SS/XL/XL2/Automatica/P200E 2°/PX80-150E 2°/Lusso/'98/MY/'11/T5
Ø 20 mm
black
Primary couple with extended Pinasco ratio (Z 23/65) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Complete set of shock absorbers
Vespa 50/80/90/125/150/180/200
total length (without thread) 280 mm
reflective diameter: 125 mm
Mounting bracket