Classic Vespa
Intake manifold BGM PRO Ø24mm compatible with Dellorto PHBL24/25, Polini CP23/24- Vespa Wideframe 125cc Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
BGM Pro Touring Exhaust for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
The new BGM Pro Touring muffler is a real wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the unobtrusive design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust right from low revs.
Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.
Stroke: 57 mm
Connecting rod length: 110 mm
Piston pin: Ø15 mm
Connecting rod bearing: needle bearing (upper and lower)
One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.
The balance factor has been improved, among other things, thanks to a hollow crank pin.
The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155
Cylinder -BGM PRO 150 cc, wide frame, Faro Basso, Ø=57mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA (from engine V55), VB1T, VGL1T, VL1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
BGM PRO cylinder with 150cc and 57 mm stroke suitable for all 2-channel engines. The grey cast iron cylinder has three transfer ports and is suitable for all wide frame engines with a 57 mm stroke. The cylinder with a 57 mm crankshaft also fits 125 cc engines with a 54 mm stroke without any issues. The third port of the cylinder is sealed with an aluminum spacer for the foot gasket, supplied, and the cylinder is evacuated via a corresponding cut in the piston. This means that no modifications to the engine housing are necessary.
Displacement: 150 cc
Stroke: 57 mm
Piston: Ø = 57 mm
Piston rings: 2 x 1.5 mm
Cylinder material: Cast iron
Cylinder head: CNC machined from solid aluminum with additional cooling fins at the bottom
Ports: 3
Spark plug: short thread (e.g., NGK B8HS, Bosch W3AC)
Ignition timing: 18-19°
The cylinder gives very old Vespas significantly more pulling power and top speed. Rapid acceleration, even by today's standards, is the specialty of the BGM PRO 150
Rollbar 2.0 reinforcement tube BLACK SERIES S.T.corse for Vespa 50/125 PK-S-XL-N-HP-FL
Vespa 50/125 PK-S-XL-N-HP-FL
🏁 Rollbar 2.0 black series – Professional Frame Reinforcement
Evolution, Rigidity, and Racing Design.
The new Rollbar 2.0 in Semi-gloss Black (powder coating) is the benchmark for those seeking maximum stability on the track. Designed to eliminate frame flex, it acts directly on the critical torsion point of the central tunnel, transforming the behavior of your Vespa.
🛠️ Technical Excellence Features
Premium Materials: Central tube in 38mm Stainless Steel for extreme resistance.
Lightweight Ergal: New centering bushings made from solid Ergal CNC, designed to reduce weight without sacrificing strength.
Laser Precision: Laser-cut stainless steel brackets bent with CNC technology for millimeter fitting.
Soft-Touch Protection: All support points are covered in high-friction rubber to stabilize the system and protect the bodywork.
🚀 Why choose it?
-Total Anti-Torsion System: Unlike standard models, it binds the frame between the under-seat and under-handlebar, eliminating flex and torsion even
Lamellar manifold to carter Falc 2 holes elastic fitting D.34/36/38/39 mm for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
It mounts without making modifications to the frame, also suitable for rotated cylinders
Flywheel mass for electronic ignition VAPE (200GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 1850g is achieved.
Material: Galvanized Fe360
Screws for fastening included
Flywheel mass for VAPE electronic ignition (800GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 2450gr is achieved.
Material: Galvanized Fe360
Screws for fastening included
YGros Race ignition by VAPE fixed advance 12 V 110W AC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
-Flywheel: 1650 Gr CNC
-12 magnets
-110 watts
-9 coils
-Fixed advance
Flywheel mass for electronic ignition VAPE (500GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 2150g is achieved.
Material: Galvanized Fe360
Screws for fastening included
YGros Race ignition by VAPE variable advance 12 V 110W AC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
-Flywheel: 1650 Gr CNC
-12 magnets
-110 watts
-9 coils
-Variable Timing
Lamellar manifold to the Falc 2-hole crankcase with elastic fitting D.30-35 mm for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
It mounts without making modifications to the frame, also suitable for rotated cylinders
Complete top case for Vespa 125 TS/Rally (also suitable for Vespa 125 GT/GTR/Super/150 Sprint/V/Super)
Vespa 125 GT VNL1>2T (adaptable/Adaptable)
Vespa 125 GTR VNL2T (adaptable/Adaptable)
Vespa 125 TS VNL3T (adaptable/Adaptable)
Vespa 150 Sprint VLB1T (adaptable/Adaptable)
Vespa 150 Sprint Veloce VLB1T (adaptable/Adaptable)
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
oiled metal
incl. lock, luggage rack rubber
Vespa 125 PX VNX1T>2T>200000
Vespa 150 PX VLX1T > 600000
Vespa 200 PE VSX1T> 300000
Original Piaggio Aluminum Shield Edge for Vespa 50 V5A1T L/R-Special V5A2>3T/V5B1>4T-90 V9A1T/125 Primavera ET3
Vespa 50 V5A1T L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Original Piaggio
Vespa 50 V5SS2T
Vespa 90 V9SS2T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Fixing nut and washer DRT clutch assembly for Vespa 125/150/200 VM-VN-GT-GTR-VNA-VBA-VBB-GL-Sprint-PX
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Tightening with a 14 mm wrench
Multiple spindle nut safety lock for Vespa 180-200 Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa PX 80 E V8X1T
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millenium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa P 150 X VLX1T 264565>
Vespa PX 150 E VLX1T
Vespa PX 150 E Arcobaleno VLX1T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa 150 C
Clutch z20 (67/68) - BGM PRO Superstrong 2.0 Touring CR Ultralube - Cosa2 Coating (14mm aluminum/sintered) - 20 teeth for primary wheel 67/68T - Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125
Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125
Touring CR aluminum/sintered Unlike the STD type, the Touring CR uses an ultra-modern pad type with sintered material, as is also common in the motorcycle sector. The coating support is made of high-strength aluminum with reinforced discs (width 14 mm) and an extra-wide clutch lining. The wide lining ensures smooth clutch engagement behavior and the large friction surface is extremely durable. The doubling of the material on the discs, which engage in the clutch basket, is designed for extremely high mileage. Thanks to the large contact surface, the basket and linings remain in perfect condition in the long term. Ideal for powerful engines that have to face long journeys.
MALOSSI Piston Ø 61.4 WITH Ø 15 PIN AND 2 SEMI-TRAPEZOIDAL RINGS) for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Michelin S83 TUBELESS Tire 3.00-10 42J TL/TT for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
3.00/10
Black
1L Package
2T
Braided Evok Iron Brake Hose for VMC Disc Brake Pump and Caliper
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Aeronautical Brake Hose with Stainless Steel Braid for Vespa
Features and Materials
Inner Core in PTFE (Teflon) The hose is equipped with a high-flow PTFE inner liner, characterized by high chemical resistance and compatible with synthetic brake fluids DOT 3, DOT 4, and DOT 5.1.
External reinforcement in stainless steel braid, the exposed metal braid structure is designed to minimize radial expansion of the hose under pressure, limiting the classic spongy effect of the lever during more intense braking. The result is a more direct, precise, and consistent braking response.
The kit includes two banjo fittings with non-crimped ferrule, designed to facilitate the passage of the hose inside the fork or the steering tube of the Vespa, simplifying installation operations.
Technical Specifications
Inner core: PTFE (Teflon).
Compatible fluids: DOT 3, DOT 4, and DOT 5.1.
Vespa PX
Vespa PE
All except Arcobaleno
Light: LED
Approval: Not approved
Installation: Fits perfectly inside the original headlight, works even without a battery.
Complete Evok Iron Led Headlight for Vespa 50 PK S/Elestart/Automatic
Vespa PK 50
Vespa PK 50 S
Vespa PK 50 S Automatic
Original left front turn signal for Piaggio Vespa PK 50-125 S/SS
Vespa 50 PK
Vespa 50 PK S
Vespa 50 PK SS
Vespa 80 PK
Vespa 80 PK S
Vespa 100 PK
Vespa 100 PK S
Vespa 125 PK
Vespa 125 PK S
Black with orange luminous body
Complete with lamp holder and black gasket
Dellorto insulating reduction bushing for Vespa 125 Primavera VMA1T/VMA2T-ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Compatible with SHBC19:19 carburetors (23 mm manifold fitting)
Reinforcements for footboard (2 pcs.) for Vespa 50 N/L/R-Special-90/125 Primavera ET3
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
K shape
Raw steel
Floorboard strips (2 pcs.) for Vespa 50 N/L/R-Special-90/125 Primavera ET3
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
Crude steel
All models
Evok Iron Brake Master Cylinder By 8.1 P-11 CNC Ø11 mm black or orange cover and black levers for Vespa 50 Special V5B3T
Vespa 50 Special V5B3T
-Plug & Play Installation: Mounts directly on handlebars with rectangular headlight (Vespa 50 Special) without any structural modification.
-Perfect Aesthetics: The kit includes a pair of levers (right for the pump, left cable for the clutch) identical in design, to ensure visual continuity and symmetry on the handlebar.
-Premium Quality: Levers made of solid aluminum for maximum strength and riding feel.
-Origin: 100% Made in Italy.
-Compatibility: Vespa 50 Special (Rectangular Headlight).
-Oil Connection: M10x1 bolt hole.
-Adjustments: Pump equipped with a screw for adjusting the braking point.
-Available Colors: Silver / Black.
Kit Contents
-1x Brake pump body.
-1x CNC solid brake lever.
-1x Coordinated CNC solid cable clutch lever.
-All necessary accessories for assembly and operation.
⚠️ Legal Warnings and intended use:
-Products intended exclusively for competitions.
-Limitations: Prohibited for use on public roads.
-Responsibility: The company declines all responsibility for
VMC clutch pressure plate with bearing for Vespa 125 VBA/VBB/VNB/Super/GT/GTR/TS/PX-150 Super/GL/Sprint/S Veloce/PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 125 PX T5 VNXST
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Specification for VMC 10 SPRINGS CLUTCH
Also fits standard Piaggio large frame clutches with 6, 7, and even 8 springs.
Made of anodized aluminum, complete with axial bearing, external sealing o-ring, central plate in burnished steel with sealing o-ring on the bearing.
Magnet flywheel fan 14 blades CNC/RACING VMC in gold anodized aluminum
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK S/XL, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PK S/XL
Front right underbody reinforcement bracket flywheel side for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK
Vespa 50 PK S
Black anti-rust coating
Metal
With central welding
Vespa 150 VL3T
Vespa 150 VB1T
Clutch cover BOLLA ELABORAZIONI with rack for Vespa PK50XL2/ FL/ HP/ PK125FL/ XL2 also suitable for Vespa 50/ 50 Special/ ET3/ Primavera-Ape 50
Vespa PK50XL2/ FL/ HP/ PK125FL/ XL2
suitable also for Vespa 50/90/125 Primavera VMA1>2T/ET3
BOLLA ELABORAZIONI satin skull fan cover for Vespa 50 N/L/R-Special-125 Primavera ET3-PK
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK-S-XL-N-HP-FL
Thickness already incorporated, compatible with original or IDM ignitions
BOLLA ELABORAZIONI fan cover black skull for Vespa 50 N/L/R-Special-125 Primavera ET3-PK
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK-S-XL-N-HP-FL
Thickness already incorporated, compatible with original or IDM ignitions