Engine tools
Engine pullers, including those specific for clutch and flywheel, are essential tools for maintenance operations on the Vespa. These tools allow for the safe and precise removal of vital components such as the flywheel and clutch without damaging them. Flywheel pullers are designed to remove the flywheel from the engine without causing damage to the threads or surface, while clutch pullers allow for the separation of the clutch from the engine for accurate maintenance or replacement. Made of durable steel, the pullers ensure effective and safe removal, making them indispensable for Vespa repair and maintenance work.
PLC Racing engine mount support for Vespa 50/90/125/150/160/180/200 (except Faro Basso/VB1/VL crossbar)
The brake cleaner is a product designed to quickly remove dust, dirt, oil, and brake fluid from brake and clutch systems. It dries in a few minutes and helps to extend the life of brake discs and pads.
Variomatic pulley tool SIP for Vespa GTS/GTS Super /GTV/GT60/GT/GT L 125-300ccm ('03-'13/'17-'22)
Vespa 125 GT L ( Euro 3 ) ZAPM31100 4T LC
Vespa 125 GT L ZAPM31101 4T LC
Vespa 125 GT ZAPM31100 4T LC
Vespa 125 GTS Super i.e.ZAPM45300 / ZAPM45301 4T LC
Vespa 125 GTS Super Sport ZAPM45300 4T LC
Vespa 125 GTS ZAPM31300 4T LC
Vespa 125 GTV ZAPM31301 4T LC
Vespa 200 GT 60° i.e. ZAPM45102 4T LC
Vespa 200 GT L ZAPM31200 4T LC
Vespa 200 GT ZAPM31200 4T LC
Vespa 250 GTS i.e. ABS ZAPM45101 4T LC
Vespa 250 GTS i.e. ZAPM45100 4T LC
Vespa 250 GTV i.e.
The fastening tool is necessary to loosen and secure the Vario nut. To do this, the tool is placed on the pulley with the two retaining tabs and screwed into the engine housing via the bushing and the screw. Now you can easily loosen/tighten the nut with a ratchet or torque wrench. No workshop should be without this tool, but it is also advisable to always carry the fastening tool with you during tours. Anyone who has ever tried to change a broken V-belt in the middle of nowhere without a fastening tool will know how important the small fastening tool can be for the Vario.
Gear tree assembly tool for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 V1-GTR 2°/TS 2°/150 VL-Sprint V2°/Super 2°/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 V1-GTR 2°/TS 2°/150 VL-Sprint V2° /Super 2°/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
M16x1.25, M14x1.5, M12x1.5, M12x1.25, RH M10x1.5, LH M10x1.5 mm
10 parts
Verify compatibility independently
All models
For stroboscopic visualization of timing marks
Usable on 4 or 2 stroke engines up to two sparks per revolution.
L 310 x W 285 x H 110 mm
12-month warranty
Supplied in a plastic case complete with cables and rubber shockproof cap and connection clamps
VMC EASY engine mount support for Vespa 50/90/125 N/L/R-Special-Primavera-PK
Vespa 50/90/125 N/L/R-Special-Primavera-PK
Bearing and fork pin assembly/disassembly tool for Vespa PK50-125/S/SS/XL/XL2/P150X 346431-
All models
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing 25X38X15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
D. 29 mm
360° Rotating Engine Support for Bench Mounting/Dismounting Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/boxer/Grillo
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing ring also suitable for Vespa 160 GS/180 SS/180-200 Rally 1°
Vespa 160 GS/180 SS/180-200 Rally 1st
All models
The ignition timing is important for the thermal health of the
engine and for delivering all the power. If the
engine is rebuilt, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source (e.g., a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12 volt battery via the alligator clips and the inductive clip on the spark plug cable (without direct contact with the wire)
Clutch Group Extractor Tool for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Size: 28x1
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Crankshaft disassembly tool clutch side Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2
Vespa 50 N/L/R- Special-125/PV/ET3/PK50-125/S/SS/XL/XL2
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
Liquid silicone gasket, resistant to glycol. Ideal for flexible flanges. Machined surfaces, metal or plastics. • The product withstands water and glycol mixtures. • Excellent for components with high torque capacity. • Enhanced formula with oil resistance and excellent adhesion. • 8 times more flexible than cork and/or composite gaskets and 3 times more resistant to oils than conventional silicone gaskets. • Operating temperature: -54°C to 260°C • Non-corrosive to sensors present in the engine (such as Lambda and others). • Low odor. Dries in 40 minutes.
Piaggio YES-HELLO-Bravo-Cricket
M17 x 1mm
Medium strength threadlocker "LOCTITE 243" locks nuts, screws, bolts, studs (10ml)
All models
SIP Extractor Tool for flywheel side gearbox shaft bearing for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Except Vespa 50 N 1963/64 (small door)
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Hub nut removal tool for 125 VNA/VNB/GT/GTR-150 VBA/VBB/GL/Sprint/S.Veloce/Rally
Vespa 125 Super VNC1T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T> 76107
Vespa 125 GTR VNL2T> 118278
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T >1151814
Vespa 150 Sprint V. VLB1T> 0165002
Vespa 180 Rally VSD1T
High-quality tool, redesigned by our staff to make it more resistant, the teeth of each individual piece have been hardened and subsequently burnished.
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing 20x47x14 mm for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50
Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50
For bearing dimensions: 20x47x14 mm
Gear shaft disassembly tool for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Engine stud removal tool set for Vespa 90/125/150/180/200 all models
All models
Measurements in the kit:
M6x1.0 mm/M7x1.0 mm/M8x1.25 mm
Piaggio Vespa
Bottle 300 ml
Clutch ring disassembly tool for Vespa 125 V1-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso -> 1994/Cosa 1/T5
vespa 125
vespa 150
Vespa 160
Vespa 180
Vespa 200
All except 125 primavera -ET3
900 gr net
Brown
BARRDAHL - Cleaner, detergent, degreaser, deoxidizes, protects electrical contacts Electrical Contact Cleaner 500
All models
Particularly effective for cleaning electrical and electronic equipment
Multi-purpose Lithium Grease BARDAHL M.P.G. MPG NLGI (250ml package)
500g
Handwashing Paste (4 kg) particularly suitable for removing various types of dirt such as grease, oils, and inks; essential for mechanics
The particular formulation allows for deep cleansing of the epidermis by combining the chemical action of detergents with the mechanical action of microgranules.
Based on glycerin for soft, hydrated skin with a lemon fragrance.