Vespa PX 200 E VSX1T
All models/All models
Complete clutch BGM Pro Superstrong CNC Z 22 for elastic gear 67/68 teeth Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
BGM PRO Super Strong clutch What is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs which works well in a power range up to 20hp / 22Nm.
With separately available stiff springs, the clutch does not disappoint, even with configurations of more than 40 hp.
Stainless steel screw kit with hex head for fan cover mounting for Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Kit consisting of 3 Mx10 screws
Clutch side oil seal 31x62.1x5.8/4.3mm BGM in FKM/Viton (E10/ethanol resistant) brown rubber
Vespa 125/150/200 PX
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
Socket: ba20d
Side stand SIP 82° with black stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=245 mm
aluminum
black
with 2 springs, self-folding
SIP side stand 82° with red stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=245 mm
aluminum
red
with 2 springs, self-folding
SIP 76° side stand with chrome stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=205 mm
aluminum
chrome
with 2 springs, self-folding
All models / Tutti i modelli
Polini Evo ignition fan for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE
Vespa PX
Vespa PE
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.4 Kg
All models
Graft Hole: 5 mm
Low voltage socket for Vespa 80/125/150/150/200 PX-PE without electric start
Vespa 80/125/150/150/200 PX-PE without electric start
Airbox Purifier Cover Polini for Vespa 180-200 Rally/P80 -150X/P200E/PX80-200E/Lusso /`98/MY/`11/T5 (with mixer)
Vespa 150 PX VLX1T
Vespa 200 Rally VSE1T Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The airbox for the original carburetor casing. Even the largest carburetor
is useless if it cannot draw enough air into a PX engine. The airboxes for the SI carburetor casings provide a remedy
here, as their significantly larger volume provides the engine with a
good 20% more air compared to the original carburetor casing cover. The engine responds much better, especially at
low revs.' of volume, suitable for models WITH mixer
Footrest bracket m16 GP racing parts in Black for Piaggio Ciao/SI/Bravo
Piaggio Ciao/SI/Bravo
The aluminum bar, of high strength, due to its 16mm diameter, provides a stable base for the knurled footpegs, a design that ensures excellent grip and super effective non-slip for both shoes and asphalt and off-road boots.
The footpegs are mounted directly onto the bar and secured using a nut-against-nut system, with the insertion of a washer that prevents loosening. To ensure further security, it is advisable to apply a minimal amount of threadlocker on both sides. The assembly requires only two wrenches: one 22 mm and one 20 mm.
Once properly secured, the footrests will remain stable and safe, requiring very little maintenance.
The knurled footrests are available in five colors:
-timeless aluminum color
-black, elegant and timeless
-gold, for a touch of luxury
-red, bold and gritty
-blue, lively and modern
Vespa 125 PX T5 VNX5T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T
Specifically designed for wire exchange
The brass pad does not mark the wire.
Gear selector prisoner m7x50 for Vespa 125-200 VNA-VBA-GT-TS-PX T5/Cosa
Vespa 125-200 VNA-VBA-GT-TS- PX T5/Cosa
Complete sport RDV Race one seat in black with black stitching for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE first series
The brand new " RDV race one " sport saddle is a perfect combination of sporty aesthetics (black stitching, sporty seat in harmony with the Vespa curves) and good comfort (metal base, 2.5 cm foam for the seat), innovative magnetic closure to ensure the best aesthetic result, entirely designed and conceived by our Staff, made with the technical support of the company Nisa SRL. 100% MADE IN ITALY
Note: For PX/PE models, it fits perfectly ONLY on tanks with a wing nut cap.
For PX/PE Arcobaleno models with a quick release cap, it can be installed by removing or lowering the central buffers provided (otherwise the central part touches before the rear part)
In the new model, the RDV logo is embossed on the rear.
Vespa PX PE T5
Primary couple with extended Malossi ratio (Z 24/63) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an evolventimeter.
The HTQ Malossi gears are made using exclusively materials that exceed the strict standards imposed by our technicians with rigorous tests and trials.
The final processing uses numerically controlled machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and strength.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Coupled in pairs to respect the correct operating clearance, the HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Original Piaggio Turn Signal Relay For Vespa 125/150/200 PX-PE New Model 2011-2012
Vespa PX
Vespa PE
Vespa PX Arcobaleno
Vespa Cosa
Vespa PK all types
6-12 VOLT, 10/21 WATT
2 Carbon Plates Kit MALOSSI 100x100mm (thickness 0.3mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
for VHSB/VHSC carburetor
Vespa 50/125 PK XL/N/HP
Vespa 80/125/150/200 PX
Compatible with all Vespa models EXCEPT for Vespa 160 GS
for VHSB/VHSC carburetor
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
Primary couple with extended DRT ratio (Z 24/62) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Luggage rack with backrest and handles, chrome for Vespa PX80-200/PE
Vespa PX
Vespa PE
With padded backrest and handles.
Fastening with tank bolts.
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
All Models / Tutti i modelli
Shield anchoring
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
SIP BE2 emulsifier for SI 20.15-17 A-D/20.20-26.26E/G/H/27.23
Vespa 80/125/150/200
For carburetors type SI
FAR Vintage Classic Rearview Mirror – Left/Right Shield in Black Color
All Models
Anchoring to the shield
Vespa all models/All models
Service Station Manual for Vespa 50-125/PV/ET3125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally
Vespa 50/90/125/150/160/180/200