Vespa P 200 E VSX1T
Rubber fuel tank cap gasket for Vespa 125 V1-33/VM/VN/VNA-TS/150 VL/VB/VBA-T4/GS VS1-5/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 125 from 1959 (excluding primavera ET3)
Vespa 150 from 1959
Vespa 160
Vespa 180
Vespa 200
Thickness: 4 mm
Notes: Resistant to unleaded gasoline
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
By clicking on buy, all available sizes will be displayed
Length-->81mm
Pin-->16x59x11mm
Compression-->42.5
All models / Tutti i modelli
Barrel: 8x8 mm
Length: 2200 mm
Diameter: 1.86 mm
Electronic ignition YGros Race by VAPE variable advance 12 V 110W DC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Cosa
Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Cosa
Flywheel approx. 1650g in CNC aluminum
9 coils
12 magnets
12V
DC
110 watts
VARIABLE Advance
All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
Rear brake shoe cam retaining spring Vespa 125 V1-TS/150 VL-Super/Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa 125/150/160/180/200
In Burnished Steel
Ref. Orig. 078521
Front LED headlight assembly for Vespa PX80-200/PE/Lusso/'98/MY/'11
Vespa PX80-200/PE/Lusso/'98/MY/'11
The LED projector has a brightness three times higher than an original PX optical group (1300 lumens). The power consumption is only 20 W. This corresponds to the luminous efficiency of a conventional 100 Watt spotlight.
Warning: the high beam is very weak compared to the low beam
FAN FABBRI RACING for VAPE electronic ignition for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Screws for fastening included
Front LED headlight unit Evok for Vespa PX80-200/PE/Lusso/'98/MY/'11
Vespa PX80-200/PE/Lusso/'98/MY/'11
The LED projector has a brightness three times higher than an original PX optical unit (1300 lumens). The power consumption is only 20 W. This corresponds to the luminous efficiency of a conventional 100 Watt spotlight.
Flywheel mass for electronic ignition VAPE (250g) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Screws for fastening included
Flywheel mass for VAPE electronic ignition (680g) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Screws for fastening included
Carburetor nozzle measurement and cleaning tool with 20 inserts (from 0.45 to 1.5 mm)
All models
Original SIEM Right Rear Turn Signal for Vespa PX80/125/150/200/PE/Lusso/T5
Vespa PX 80 E Rainbow
Vespa PX 80
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa P 125 X E
Vespa PX 125 E Rainbow
Vespa P 125/ETS
Vespa PX 125/TS
Vespa P 150 X
Vespa PX 150 E
Vespa PX 150 E Rainbow
Vespa P 200 E
Vespa PX 200 E
Vespa PX 200 E Rainbow
Black with bright orange body
Complete with lamp holder
Gasket
Plastic
Vespa 50/80/90/125/150/180/200
280 mm
125 mm
Mounting bracket
Blue Glass
Maximum jet for carburetors SI 20.15-17 A-D/20.20-24.24-26.26E/G/H/27.23
Front luggage rack CUPPINI black with gasoline can holder (5l can not included) for Vespa 80/125/150/200 PX-PE-Arcobaleno-MY
All up to the PX model / All Models >PX
Including tie rods and pads for fastening
Front luggage rack CUPPINI chrome with gasoline can holder (5l can not included) for Vespa 80/125/150/200 PX-PE-Arcobaleno-MY
All up to model PX / All Models >PX
Includes Tie Rods and Pads for Fixing
METZELER ROADTEC Tire 3.50/10 59J for Vespa 125/150/200 GT-GTR-Sprint-GL-PX-PE-Rally-SS-Ape 50
Vespa 125 GT
Vespa 125 GTR
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
Vespa PX
3.50/10
Black
Oversized BGM clutch cover for Vespa 125 125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE /Lusso/Cosa/T5
Vespa VNA-TS/150 VBA-Super/Rally/PX80-200/PE-Lusso/Cosa/T5
Vespa PX 125
Vespa PX 150
Vespa PX 200
Vespa PE 200
Ref. Orig.177497
Electronic control unit idm EVOK variable advance for POLINI/PINASCO/VMC ignitions
Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/200
Polini air filter Ø39 short for carburetors PHVA/B-PHBN-PHBG-PHBL
Vespa 50/90/125/150/200
Reinforced internal lever for POLINI clutch control rod for Vespa 125 VNB-TS/150 VBB-Super/Rally/PX80-200/PE/Lusso/Cosa/T5/PK50/125 XL/XL2/LML Star/Deluxe 125-150 2T/4T
Vespa 50 Special V5B3T 95878>96377
Vespa 90 V9A1T 41584>160960
Vespa 125 VNB1M 070738>
Vespa 125 VNB2>6T
Vespa 125 GT/GTR/TS/PX
Vespa 150 VBB1M 10798>
Vespa 150 VBB2T
Vespa 150 Sprint/V/GL/PX/Cosa
Vespa 180 SS/Rally
Vespa 200 Rally/PE
Internal lever for clutch control rod for Vespa 125 VNB-TS/150 VBB-Super/Rally/PX80-200/PE/Lusso/Cosa/T5/PK50/125 XL/XL2/LML Star/Deluxe 125-150 2T/4T
Vespa 50 Special V5B3T 95878>96377
Vespa 90 V9A1T 41584>160960
Vespa 125 VNB1M 070738>
Vespa 125 VNB2>6T
Vespa 125 GT/GTR/TS/PX
Vespa 150 VBB1M 10798>
Vespa 150 VBB2T
Vespa 150 Sprint/V/GL/PX/Cosa
Vespa 180 SS/Rally
Vespa 200 Rally/PE
Complete shield sheet metal for Vespa 125/150/200 PX-PE VNX1T-VNX2T-VLX1T-VSX1T
Vespa 80 PX
Vespa 125 PX VNX1>T
Vespa 150 PX VLX1T
Vespa 200 PE VSX1T
Finish: Raw
Main features: With crossbars and reinforcements under the handlebar already welded.
MICHELIN S1 TT/TL Tire (100/90/10) Vespa 125/150/160/180/200 for Vespa Sprint-GL-GTR-TS-PX-Rally-Ape 50
Vespa 125 GT(non-standard)
Vespa 125 GTR(non-standard)
Vespa 125 TS VNL3T(non-standard)
Vespa 150 GS VS1>5T(non-standard)
Vespa 150 GL(non-standard)
Vespa 150 Sprint VLB1T(non-standard)
Vespa 150 Sprint Veloce VLB1T(non-standard)
Vespa 160 GS VSB1T(non-standard)
Vespa 180 SS VSC1T(non-standard)
Vespa 180 Rally VSD1T(non-standard)
Vespa 200 Rally VSE1T(non-standard)
Vespa PE(non-standard)
Vespa PX (non-standard)
Vespa 125/150/200 Cosa
Vespa P 125 X VNX1T
Vespa P 200 E VSX1T
Note--> Reprint
Complete cam lever kit for rear brake shoes for Vespa 125 GT/GTR/Super/TS/150 Sprint/V/Super/Rally/PX80-200/PE/Lusso/T5
Vespa 125 GT/GTR/Super/TS/150 Sprint/V/Super/Rally/PX80-200/PE/Lusso/T5
Ring OR clutch release lever/oil pump Ø 12x9x1.7 mm for Vespa 50/90/125/Primavera/ET3/PK50/125/S/XL- PX-PE
Vespa 50
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PX
Vespa PE
SIP clutch ring disassembly tool for Vespa 125 V1-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso -> 1994/Cosa 1/T5
vespa 125
vespa 150
Vespa 160
Vespa 180
Vespa 200
All except 125 primavera -ET3
Complete light with reflector for Vespa 80/125/150/200 PX-PE
Vespa PX
Vespa PE
All except Arcobaleno
Flywheel mass for electronic ignition VAPE (200GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 1850g is achieved.
Material: Galvanized Fe360
Screws for fastening included
Flywheel mass for VAPE electronic ignition (800GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 2450gr is achieved.
Material: Galvanized Fe360
Screws for fastening included
YGros Race ignition by VAPE fixed advance 12 V 110W AC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
-Flywheel: 1650 Gr CNC
-12 magnets
-110 watts
-9 coils
-Fixed advance
Flywheel mass for electronic ignition VAPE (500GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 2150g is achieved.
Material: Galvanized Fe360
Screws for fastening included
YGros Race ignition by VAPE variable advance 12 V 110W AC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
-Flywheel: 1650 Gr CNC
-12 magnets
-110 watts
-9 coils
-Variable Timing
Vespa 125 PX VNX1T>2T>200000
Vespa 150 PX VLX1T > 600000
Vespa 200 PE VSX1T> 300000