Vespa P 200 E VSX1T
Complete Oil Seal Kit - BGM PRO, FKM/Viton® (resistant to E10) Ø 30 for Vespa 80/125/150/200 PX-PE-Rainbow-Elestart
Vespa PX 80 E V8X1T 3000001> 3000996
Vespa PX 125 E VNX2T 87954>
Vespa 125 PX E Arcobaleno VNX2T>280358
Vespa 125 PX E Arcobaleno Elestart VNX2T> 280358
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 Cosa VNR1T
Vespa PX 150 E VLX1T 455340>
Vespa PX 150 E Arcobaleno VLX1T >711687
Vespa PX 150 E Arcobaleno Elestart VLX1T >711687
Vespa 150 Cosa VLR1T
Vespa P 200 E VSX1T 153348>
Vespa PX 200 E VSX1T 153348>
Vespa PX 200 E Arcobal
WHY FKM The FKM material (fluorocarbon rubber) is extremely resistant to heat, friction, and fuel/ethanol. In Germany, the current super fuel already contains up to 5% ethanol. In other countries, the ethanol/alcohol content is even higher. Conventional sealing rings can swell or soften when in contact with ethanol-containing fuels. The BGM PRO FKM oil seals, on the other hand, offer perfect protection. Additionally, FKM is twice as resistant to temperatures compared to conventional NBR oil seals (blue), has excellent gas impermeability, and is also highly resistant to aging.
SUITABLE FOR An engine equipped with BGM PRO FKM oil seals can therefore operate without issues even with E10 fuel (10% alcohol). The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds. The BGM PRO FKM oil seals are therefore suitable for all engines, whether they are original engines or high-performance tuned engines.
BGM PRO ADVANTAGES The BGM PRO oil seals offer the additional feature of double sealing. All oil seals that seal to the atmosphere have a so-called
Oil seal kit for engines Ø 27 -BGM PRO, FKM (E10/ethanol-resistant) rubber, brown for Vespa 125/150/200 PX-TS-GTR-Sprint Veloce
Vespa PX 80 E V8X1T >100000
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139 >
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >87953
Vespa 150 Super 412374 >
Vespa 150 PX VLX1T >455339
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 200 RALLY 0033997 >
Vespa 200 PE >153347
Rear hub oil seal: 27
Vespa 50/90/125/150/160/180/200
KOSO signal filter for reliable RPM detection directly on the HT cable — universally applicable and ideal in cases of inaccurate RPM readings.
If the RPM signal is inaccurate, the KOSO RPM signal filter can help.
Improved signal at the tachometer input
Universal application
Sometimes, an electronic tachometer may have difficulty displaying the RPM accurately. If the signal is detected directly from the HT cable, the cause may be a "distorted" pulse. The voltage peaks generated by each ignition pulse are not then detected or counted with sufficient precision by the tachometer.
The KOSO signal filter helps to filter the individual ignition pulses more cleanly, thus allowing for a more reliable display of the RPM.
Connection to the SIP speedometer/tachometer
Red = positive 12 V DC
Green = Ground
Brown = brown wire of the SIP tachometer
Place the clamp on the HT cable and set it to 1 pulse in the adjustment menu.
Technical details
Operating voltage: 12 V
Silent Block muffler 30x30mm (1pc) M8 mount Vespa 50/90/125 Primavera ET3-PK
Silent Block exhaust 20x30mm (1pc) M8 mount Vespa 50/90/125 Primavera ET3-PK
Vespa P 80 V8A1T
Vespa PX 80 E
Vespa P 125 X VNX1T
Vespa PX 125 E
Vespa 125 PX E Rainbow
Vespa 125 PX E Rainbow Elestart VNX2T>200000
Vespa PX 125 T5 VNX5T (parking light)
Vespa P 150 X VLX1T
Vespa PX 150 E VLX1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
BA9S Socket 6v 0.3 watt
CRIMAZ easy type cross with thread for Vespa 125/150/200 Sprint v-TS-PX-PE-Rally
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
Vespa PX
Vespa PE
Including rod and base gasket
Primary gear 65 teeth DRT multiple gear pin complete with shock absorbers for Vespa 125 GT/GTR/Super/TS/150 GL/Sprint/V/Super/160 GS/180 SS/180 Rally/P80-150X/PX80-150 E/Lusso/'98/MY/'11/Cosa 125-150/T5
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T Millennium '98
Z 65 teeth
Ref. Orig. 1127205-026227
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T Millennium '98
Z 65 teeth
Ref. Orig. 1127205-026227
Black Steel License Plate Frame 180X180 mm for all plates since 1999
All models branded since 1999 / All models branded since 1999
In Metal
Dimensions: 180x180 mm
Material: 100% Cotton
Nisa seat cover in Midnight Blue for Vespa 80/125/150/200 PX-PE 1st series
Vespa PX 80
Vespa PX 125
Vespa PX 150
Vespa 200 PE
Special support bracket for mirror and smartphone in galvanized metal (left/right) for Vespa 50/80/90/125/150/180/200
Vespa 50/80/90/125/150/180/200
Rear shock absorber SPORT version adjustable for Vespa 50/90/125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Color: Body and spring Black
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
Size: 2.10x10"
Universal anti-theft chain LAMPA with ATROX shackle lock, 10mm section, 90 cm length
All models
Guaranteed security
Vespa 50/90/125/150/160/180/200
Tool bag with tools Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - brown
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Included:
- 6 ring spanners in sizes (7, 8, 9, 10, 11, and 13mm).
- A set of 10 pieces of ½" socket wrenches in sizes (10, 11, 13, 14, 17, 19, 21, 22, and 24mm)
- A set of 41 pieces of ¼" socket wrenches in sizes from 4mm to 14mm and bits for slotted, Phillips, hex, and TX keys
- Needle nose pliers
- Tube wrench
- Spark plug wrench
- 10 cable ties
- 10m insulating tape
- 100g of winding wire
- 11-piece Bowden cable repair kit
- Canvas tool bag with 5 compartments
Kit lower and upper bearing set P&A for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete black king queen seat for Vespa 125/150/200 VNB/VBB/GL/Sprint/TS/GTR/PX/PE
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE (All)
Two-seater, plastic bottom, with handle and lock
100% MADE IN ITALY
Note: Very Comfortable
Carburetor-air filter, crankcase-air filter gasket pair in aramid for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
In aramid
2 Pcs.
Pair of BGM Pro silent blocks engine crossbar - MEDIUM - for Vespa PX200/Rally 200 (VSE1T) (2nd series)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder to help).
ATTENTION--> Directional silent blocks, they must be mounted according to the direction of travel in the following way: Left direction of travel: red mark, right direction of travel: green mark.
Front shock absorber buffer kit BGM PRO (2 Pcs) for Vespa 80/125/150/200 PX-PE
Vespa PX (all)
Vespa PE (all)
Vespa 50 PK XL Rush
Vespa 125 PK
BGM PRO silent tires in polyurethane. Much narrower than the original tires, they minimize self-movement. The damping thus works more defined and precise. The vehicle appears much narrower, the shutters respond faster.
The set contains the two tires for the front axle shock absorber. The
tires are located on the shock absorber and are mounted both above and below
the screwed metal fixing plate of the front fork. They replace the standard silent tires 1:1 without further modifications.
ASSEMBLY
The larger rubber is first pushed onto the upper end
of the shock absorber. The smaller rubber is located on the top
of the mounting plate. The large washer is then placed above the support plate and secured with a serrated washer and a nut. Torque for the upper nut 30-40 Nm.
Just swap the rubber with the original ones, ready.
Cross type with thread for Vespa 125/150/200 Sprint v-TS-PX-PE-Rally
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
Material: 40 NI Cr Mo 15 (Sim. Piaggio)
Faucet control rod for Vespa 200 Rally/P80-150X/P200E/PX80-200E/Lusso/P150S adaptable to Vespa PK50-125/S/SS/XL/Rush/ETS
Vespa PX (all)
Vespa PE (all)
Vespa 200 Rally VSE1T
Vespa PK
Rod length: 165 mm, Plastic knob
Kit lower and upper bearing set for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Economy version
Front hub flat spacer washer for Vespa PK/S/XL/XL2/PX80 -200E/Lusso/'98/MY/T5
Vespa PK/S/ XL/XL2/PX80 -200E/Lusso/`98/MY/T5
Size: Ø 36.5x22 mm
Orig.Ref: 177445
IDM electronic control unit Malossi vespower for Malossi ignitions
The 4 seasons helmet is ideal for tackling the hotter seasons thanks to the large shell vents that ensure air circulation inside the helmet, and at the same time, it is also effective in adverse conditions thanks to the long external visor and the special covers for the vents provided. The 116 AIR is made in two sizes of outer shell in HPT (High Performance Terpolymer) and with four internal shells in multi-density EPS. It also features a retractable internal sun visor, thermoformed interiors, cheek pads, and chin strap made with easily removable and washable hypoallergenic and antibacterial fabric. The equipment is completed by the micrometric buckle, the anti-theft ring on the strap, and the strap holder elastic.
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. The thermoformed interiors, completely removable and washable, are equipped with a removable chin guard and neck collar with a zipper and, in all graphic variants, embellished with vintage-style brown eco-leather details. The PIX can be equipped with a long visor for greater wind protection or with a modern-shaped visor, the interchangeable visors share the fastening system which, in the graphic versions, is in metal. The helmet's equipment is completed by the micrometric buckle, the anti-theft ring, the strap holder elastic and, in the graphic variants, the rear goggle strap holder.
ECE-R 22.06 APPROVAL
SIZES: XS (54cm), S (55cm), M (56cm), L (57cm), SIZES: XL (58cm), XXL (59cm)
AVERAGE WEIGHT SIZE M: 1050 +/- 50 gr2 OUTER SHELL SIZES2 EPS SIZESHELL IN HPTAIR STREAM SYSTEMINTERCHANGEABLE VISORSREMOVABLE INTERIORREMOVABLE CHEEK PADSREMOVABLE CHIN GUARDREMOVABLE NECK ROLLQUICK RELEASE BUCKLEGOGGLE STRAPANTI-THEFT RING ON STRAPSTRAP HOLDER ELASTIC
Original Piaggio rear right turn signal for Vespa 125/150/200 PX-PE
Vespa PX 125
Vespa PX 150
Vespa PX 200
Vespa PE 200
Vespa Arcobaleno
white
chrome housing
without bulbs
indicator lamp holder: Bau15s
with E-mark approval
Nut and washer clutch assembly BGM PRO for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
M12 x 1.50 collar Ø:18.6mm h:9mm
key opening:15
FAR Vintage Classic Rearview Mirror – Left/Right from Shield in Black Color
All Models / Tutti i modelli
Shield anchoring
Complete crankshaft for Vespa 200 PE VSX1T-Rally Ducati ignition
Vespa 200 PE
Vespa 200 rally VSE1T 0033996>
Roller cage
Complete
ATHENA complete engine gasket kit with engine o-rings and brake shoe plate for Vespa 125 VNA/VNB/GT/GTR/TS/Super-150 VBA/VBB/GL/Sprint/Super-160 GS-180 SS-200 Rally-PX-PE-Cosa all models also with Mix
Vespa 125 VNA/VNB/GT/GTR/TS/Super-150 VBA/VBB/GL/Sprint/Super-160 GS-180 SS-200 Rally-PX-PE-Cosa all models also with Mix
Athena offers the widest range of replacement engine gaskets available on the market, boasting over 40 years of experience in the industry.
At the core of Athena gasket kits is solid know-how, constant technological development conducted by an internal team of engineers and designers, and production carried out strictly following the stringent parameters imposed by manufacturers. The use of state-of-the-art lasers ensures perfect cutting quality.
Furthermore, Athena has a wide availability of raw materials, performs surface treatments to compensate for surface irregularities, and follows material relaxation processes to improve sealing in the most critical areas.
This complete and unified gasket series for Vespa Large Frame is designed for all Vespa enthusiasts who want to overhaul their vehicle's engine with safe, cutting-edge products that offer several advantages:
BYE BYE SILICONE
No oil leaks, no silicone residue to clean up, speed and ease of installation: Athena gaskets do not require sealants.
UNIQUE ON THE MARKET
From the 1950s onwards, the engine blocks installed on different versions of Vespa Large Frame have changed in geometry, sometimes for a few but decisive details.
Athena has deployed its technicians and over 40 years of know-how to study the kits and
All models
Made of real carbon, length 10cm, height 3cm, thickness 1.5mm, usable as a keychain or to apply on the shield of your Vespa
Carburetor -BGM PRO Faster Flow Dellorto/SPACO SI24/24E (Without mixer) for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
BGM FASTER FLOW SI Carburetor - optimized carburetor for high-performance engines
High-performance engines require reliable and consistent fuel supply. The BGM FASTER FLOW carburetor is designed to meet these needs, using the SI24/24E or SI26/26E Dell'Orto/Spaco models. Each unit is completely disassembled, tested, reworked, cleaned, and carefully reassembled in our factory, ensuring the highest quality for modified engines.
Main modifications:
Enlarged connection holes from the float chamber to the jets
Added a hole in the float needle area
Spring-loaded float needle for increased durability
These modifications significantly improve fuel supply, preventing shortages even with powerful exhausts. In particular, the spring-loaded float needle compensates for vibrations and increases durability, while the optimized supply is also an advantage for stock engines.
Advantages:
No jet blockage with powerful exhausts
Easy tuning even with over 20 HP
Quiet, powerful, and suitable for everyday use
Available for mixed or separate lubrication
Suitable for:
Engines with SI20/20D or 24/24E carburetors,