Vespa P 200 E VSX1T
Clutch bell 7 springs "power up clutch" Malossi for Vespa 200 Rally-PE-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
High-strength steel with surface hardening treatment to increase wear resistance and, consequently, durability.
Reinforcement ring welded with TIG technique on the outer diameter of the bell to effectively counteract the centrifugal force developed by the higher rotational speed.
For original clutch and Malossi POWER UP CLUTCH SYSTEM.
Power Up Clutch Spring Holder Plate Malossi for Vespa 125 T5-200 Rally-PX
Vespa 180 Rally VSD1T 0014741>
Vespa 200 Rally VSE1T
Vespa 125 T5 VNX5T
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T
TECHNICAL FEATURES:
Clutch base plate: Hardened steel, high toughness, optimal for components with highly dynamic stresses with a tensile strength of 1000 MPa. Surface hardened (LCN) to 300HB, depth 10-25 µm. Main spring seats machined with offset relative to the clutch bell to ensure intrinsic torque, eliminating any play. Auxiliary spring seats machined aligned with the clutch bell. Tight tolerances between the spring push disc tabs and the clutch bell eliminating clutch noise and increasing durability. Surface induction of the bronze bushing coupling section. Hardened to a depth of 1.5 mm, 60HRC, improving durability. For original clutch bell and POWER UP CLUTCH SYSTEM Malossi.
Vespa PE 200
Vespa 200 Rally VSE1T
Vespa 200 Cosa
Painted in black
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Pinasco touring classic 2.0 exhaust for Vespa 200 Rally/PE
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
The PINASCO TOURING muffler has been designed to enhance the engine's performance both at low and high revs while maintaining the same level of quietness. The innovative design that “breaks all current patterns” has been studied to achieve the right gas expansion, which significantly increases engine performance (about 4HP) even at full stretch.
Elastic ring Malossi in high-toughness tempered steel clutch pack tightening for Vespa 200 PX-PE
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Malossi 7 Springs Clutch Kit POWER UP CLUTCH SYSTEM for Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
The Malossi range for the Vespa offers products with extremely high technology capable of developing performance increases
so exceptional compared to the standard, that it requires the adaptation of other fundamental components
of the vehicle.
Just compare a Vespa PX 200 E produced in 1978, which originally develops a power of 12.35 HP at 5700 RPM, with a Vespa "tuned" with Malossi Kits, which can develop 27.5 HP at 8000 RPM, or more than double
HP at an extremely higher rotation speed, to understand that it was absolutely essential to design a clutch unit capable of withstanding the stresses due to a performance increase of such proportions!
The POWER UP CLUTCH SYSTEM Malossi clutch units are designed to provide a response and overcome all the problems that inevitably arise when the clutch unit technology is not adequate to the other engine components. A traditional clutch, having to transmit more than double the power to the gears, while simultaneously rotating much faster, can lead to bell failures under the effect of
centrifugal force, slipping and deformations that translate into annoying and unsettling metallic noises, up to the classic clutch slipping caused by
Primary couple with extended Malossi ratio (Z 23/64) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The HTQ Malossi gears for Vespa PX carry the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-toothed configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved through special machining of the teeth and their contact surfaces, meticulously finished and verified with an involute tester.
The HTQ Malossi gears are made using only materials that exceed the very strict standards imposed by our technicians with rigorous tests and trials.
The final machining uses numerically controlled machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C that gives them the required hardness and resistance.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Paired two by two to ensure the correct operating clearance, the HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Vespa 125/150/200
PIAGGIO thermal group (200 cc) in cast iron for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Diameter: 66.5 mm
Stroke: 57 mm
Notes: Without head
Bedding -Vespa 150ccm Italian Style- Size: 135x200cm / 80x80cm, blue, 100% cotton
The reversible Vespa bedding is printed with different patterns on the front and back. So it's up to you to choose the side you want to see on your bed.
Made of 100% cotton in fine and dense Renforcé quality. This makes it pleasantly soft and particularly light and smooth. Thanks to the zipper, the bedspreads and pillowcases can be put on quickly and easily.
Vespa reversible sheets
consisting of duvet cover and branded zipper pillowcase
suitable for all year round
Machine washable at 60 degrees
100% cotton (Renforcé)
dimensions: 135x200cm / 80x80cm
tested for harmful substances according to Öko Tex Standard 100
blue
100% cotton
Various pockets and compartments;
.
Specific fuel hose kit for unleaded petrol (60cm) for Vespa 125/150/200 PX-PE
Vespa 125/150/200 PX-PE
Size: 7x14 mm
Includes hose clamps (diam. 14mm)
Vespa V50/PV/ET3/125 GT/GTR/Super/
TS/150 Sprint/V/Super/180
/200 Rally/GS160/SS180/PK50
125/ PX80-200/T5
Black painted wheel hubcap 10" open type - Vespa V50, V90, PV125, ET3, PK, GT, GTR, TS, GL, GS VS5T, Sprint, T4, Rally, PX, T5
All models with wheels 3.00x10/ 3.50x10
Carburetor jet reamer tool with 12 reamers (from 0.6 to 1.9 mm)
All models
AGM Battery 6V-1.3 Ah for Backup Use Digital Odometer-Various for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/160/180/200
TECHNOLOGY: AGM
VOLTAGE: 6AH 1.3
WEIGHT: 0.32
LENGTH: (MM) 97
WIDTH: (MM) 24
HEIGHT: (MM) 52
TOTAL HEIGHT: 58
TERMINAL: F1
AGM Battery 12V-0.8 Ah for buffer use Digital Odometer-Various for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/160/180/200
TECHNOLOGY: AGM
VOLTAGE: 12AH0.8
WEIGHT: 0.34
LENGTH (MM) 96
WIDTH (MM) 25
HEIGHT (MM) 61
TOTAL HEIGHT 61
TERMINAL: Spec.
Malossi "Vespower" Voltage Regulator 12V AC/DC for Malossi Electronic Ignitions
Vespa 200 PE VSX1T
By clicking on purchase, all available sizes will be displayed
Central stand relocation MRP for Vespa PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX80-200/PE/Lusso/'98/MY/'11/T5
For all exhausts that obstruct the central stand
All up to the PX model / All Models >PX
Includes Tie Rods and Pads for Fixing
Manufacturer: FACO (100% made in Italy)
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Painted in black, Aluminum Silencer
Clutch gear group Z21 on primary Z67/68 for Vespa 80-125-150-200 PX PE
Vespa 80/100/125/150/200
Tested on primary Z68, it fits perfectly with 7-spring clutches (Diam.107.769mm), it is possible to mount it on 6-spring clutches by turning the disc to 97 mm. It is also possible to mount it on primary 65 teeth DRT.
Total length: 120mm
Screw with spring for idle adjustment screw VHSB Vespa V50/90/100/125/PV/ET3/PK50/S/SS/X
For VHSB carburetors
Electric cable with Red silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electric cable with Blue silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUIVALENT TO 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electric cable with White silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electrical cable with Yellow silicone-rubber coating for stator restoration and various uses.
All models/All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electric cable with Gray silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resistant to temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electrical cable with Brown silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm