Vespa P 200 E VSX1T
Perforated bowl kit MD Racing (7 pieces) in c40 for Vespa 200 Rally-PE-Cosa
Vespa 200 Rally-PE-Cosa
Compared to commercially printed glasses, the MD racing glass has a constant thickness of 1mm across the entire profile.
This solution minimizes the risk of the bottom breaking under the strong pressure of the spring, which would cause the spring to come out with obvious damage to the engine.
VHSH carburetor
VHSH carburetor
All models
The ignition timing is important for the thermal health of the
engine and for delivering all the power. If the
engine is rebuilt, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source (e.g., a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12 volt battery via the alligator clips and the inductive clip on the spark plug cable (without direct contact with the wire)
Vespa 50/80/90/125/150/180/200
round
Ø 110 mm
chrome
bar length: 85mm
thread: M10
glass adjustable from the inside with approval mark and
Decomposable "RUSH" Aluminum Rim in Black 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
O-ring kit for tubeless rim closure
Dimensions: 2.10x10''
Vespa 200 PE
Vespa 200 rally VSE1T
Vespa 200 Cosa VSR1T
Roller cage included
Notes: Advanced
Stroke 60 mm
From 215cc to 225 cc
All models
All Models / Tutti i modelli
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Stroke 57 mm, Connecting rod 110 mm
Graduated measuring cup for oil mixture 2% scale for liters/gallon without lid
Plastic
Graduated scale for 2% mixture
Tutti i modelli
Size: 7x12 mm
Vespa 50/90/125/150/180/200
Compatible with 10-inch open rims, it attaches to the fork tube by passing it through the wheel rim and securing it with the provided lock.
WARNING: Check the gap between the drum and the rim, on some models described as COMPATIBLE, a hole in the wheel rim may be necessary if the latter is NOT wide enough to allow the passage of the anti-theft device.
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millenium '98
Vespa 200 Cosa VSR1T
Compatible with our article: 02-CX-009-FA
Underseat helmet hook for Vespa P80/125/150X/PX80/125/150/200E1°/P150S/P200E
Vespa PX >1982
Vespa PE >1982
For models with EXTERNAL tie closure.
Spring bridge dual saddle for Vespa 125 Vespa 150 Vespa 180 Vespa 200
Vespa 125 Vespa 150 Vespa 180 Vespa 200
Finish: Raw
All Vespa models
universal, 360° swivel, minimum height: 13cm, maximum: 43cm empty weight: 34kg, load: 400kg
Tin poster with central embossed image.
Dimensions 30x40 cm.
Flywheel puller tool M28x1 for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/125 GT-TS/150 GL-Super/200 Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Size: 28x1
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Circle Wheel Makes Italy in polished aluminum alloy for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/Rally/PX/PE/T5/LML
Vespa 50 Special V5B1>3T
Vespa 50 SS V5SS1>T
Vespa 50 PK
Vespa 90/125 Primavera VMA1-2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa 125 GT/GTR/TS
Vespa 125 PX
Vespa 150 GL VLA1T
Vespa 150 GS VS5T 0047351>
Vespa 150 SPRINT/SPRINT VEL
Size: 2.10x10"
Included: Nuts and grower washers
Material: Aluminum and Silicon
Notes: Detachable, NO TUBELESS
vespa px 125 (from 1978 to 1982)
vespa px 150 (from 1978 to 1982)
vespa pe 200 (from 1978 to 1982)
In aluminum
Mounts on fork with axle mm. 18-16
Complete with bearing
Carburetor cover "AT design prototypes" KEIHIN -Polini-Dell'Orto
For carburetor:
Keihin PWK 28
Polini PWK 24-26-28-30
Dell'Orto PHBL
Stage 6 PWK 24-26-28
Voca PWK 24-28
Carburetor cover adjustable horizontally and vertically (to avoid abnormal tension on the throttle cable)
Lower steering bearing group Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete
Custom chrome left rearview mirror for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Universal racing handlebar
Package: Left
Color: Chrome
Dimensions: length 170 mm; height 155 mm
Mirror: length 145 mm; height 44 mm
Included kit: M8 -M8 left; 10 x 1.25; 10 x 1.25 left
Roller bearing gearbox shaft MALOSSI 29x35x13 mm for Vespa 125 GT 2°/GTR/Super 2°/TS/150 GL 2°/Sprint 2°/V/Super 2°/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Super VNC1T 024900>
Vespa 125 GT VNL1T 60900>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 PX T5
Vespa 150 Super VBC1T 70200>
Vespa 150 Sprint VLB1T 73900>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Measurements: 29x35x13 mm
Preloaded M8 Washers MD Racing (4pcs) for Vespa 200 PE-Rally-Cosa Studs
Vespa 200 PE-Rally-Thing
Special kit of harmonic steel washers with preload
specifically to compensate for the play due to thermal excursions of Vespa cylinder studs.
These washers are fully compressed at 2 kgm (20 N/m)
(tightening of Vespa studs) which usually falls within the
Piaggio guidelines between 1.7 and 2.2 Kgm
and compensates for the loosening of the studs subjected to heating and elongation.
Dimensions:
internal diameter 8.4 mm
external diameter 18 mm
thickness 2 mm
washer height at rest on average 2.4 mm
average excursion 0.4 mm
BGM PRO BigBox SPORT V2 (BBS2) Exhaust for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 PX-PE
BGM BigBox Sport V2 for Vespa PX200
Performance like a racing exhaust - appearance like a stock exhaust
The BGM BigBox Sport V2 is a purebred racing exhaust for Vespa, in the unsuspecting design of an original exhaust. It stands as a clear alternative to large and flashy resonance exhaust systems. The high level of performance clearly distinguishes the BBS2 from other exhaust systems. Designed for performance-oriented drivers who appreciate the benefits of a low-profile vehicle.
NEW BBS V2
The basic concept has been maintained and only adapted to the greater requirements due to the increased power and engine displacement. The BGM BBS2 (=Big Box Sport V2) has widened pipe sections both inside the box and in the exhaust area. This effectively prevents the power fade that often occurs with very powerful engines (over 30 HP).
Additionally, the often-criticized ground clearance of the manifold has been modified. The system is now fully suitable for daily use and has the same ground clearance as a comparable resonance exhaust. Like the Big Box Touring V2, the BBS2 is now also equipped with a connection between the manifold and the exhaust body.
REQUIREMENTS
All models /All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
High-speed Pinasco crankshaft bearing kit for Vespa 125/150/200 GTR-TS-PX-Super-Sprint Veloce
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 PE
Flywheel side: 25x38x15
Clutch side: 25x62x12
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PX, Vespa 150 PX, Vespa 200 PX, Vespa PX Arcobaleno
Rear Shock Absorber Classic Line
ADJUSTMENT
Spring preload with single ring, continuously adjustable, made with the best aluminum alloys available on the market. The radial holes on the ring allow, using the practical key provided, to quickly and easily modify the set-up.
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
Front shock absorber Classic line,
Adjustments: Single ring spring preload, continuously adjustable, made
with the best aluminum alloys available on the market. The radial holes
on the ring allow, using the practical key provided, to quickly and easily modify the set-up.
Premium engine gasket kit for Vespa 125 GTR 2°/TS 2°/150 Super 2°/Sprint V 2°/PX80-200/PE/Lusso/'98/MY/'11/Cosa
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa 125 GT R VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa P 125 X VNX1T
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millenium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa P 150 X VLX1T
FASIT Material:
This material is a mixture of cellulose and synthetic fibers, asbestos-free, which ensures a very effective seal.
The same material is used to manufacture gaskets for modern engines.
Primary couple with extended Malossi ratio (Z 23/64) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical gears.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an involute tester.
HTQ Malossi gears are made using exclusively materials
that exceed the strict standards imposed by our technicians with rigorous tests and trials.
The final machining uses CNC machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and
resistance.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Paired in pairs to ensure the correct operating clearance, HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Spacer cover purifier (models with mixer) VESPTEC for Vespa P200E/PX200E/Lusso/`98/MY/T5/Cosa 200
Vespa 125 T5 VNX5T
Vespa 125 T5 Elestart VNX5T
Vespa 200 Rally VSE1T
Vespa 200 PX VSX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 Cosa1 VSR1T
Vespa 200 Cosa2 VSR1T
Cylinder base spacer -BGM ORIGINAL Malossi 210 / Polini 207, Polini 210, Polini 221 / Pinasco 213, Pinasco 225 / Original 200 for Vespa Vespa Rally200, PX200, Cosa200
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
All models / Tutti i modelli
Mirror support bracket on the handlebar in galvanized metal (LH)
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Including hardware
Complete starter transmission for Vespa 125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VGLB1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Only for models WITHOUT automatic mixer