Vespa 50 S 2T
Light brown wicker storage basket with lid -47x31x25cm- scooter, vespa, mopeds
All Models / Tutti i modelli
SIP license plate holder, for German license plate, rear all models
All models
180x200 mm
Material: plastic
black
Original PIAGGIO battery compartment for Vespa ET4/โLX/โLXV/โS 50-150ccm
Vespa ET4/โLX/โLXV/โS 50-150ccm
152x88x90 mm
low, for YB9-B
for VHSB/VHSC carburetor
for carburetor VHSB/VHSC
a=95 mm
ร 85 mm
ceramic
red
in gift box
Vespa 50/90/125/150/200
SIP classic bag/luggage in hazelnut color
480x300x270 mm
approx. 35 l
nylon
beige brown RAL 1011
All models
JET HELMET - CITY ONE
Outer shell made in two sizes
Thermoplastic material
Retractable sun visor
Wind tunnel tested
Maximum silence
Maximum comfort
Maximum safety
Pinlock ready
Bluetooth ready
Oil can support - luggage rack for inner shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Measurements---> L 13.5 cm H18.5 cm
Size: 80x50cm (check the size before purchasing)
Extremely compact and lightweight demi-jet, it differs from the classic
spherical helmet thanks to the front metal air intakes and the rear
shell cuts that also house the air extractors. It is
equipped with fully removable and washable thermoformed interiors and is
available with a long visor or with a shaped visor that share the
fastening system.
Oil can support - luggage rack for internal shield right and left side -RDV- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, such as Sprint, V50, Primavera, VNB, VBB etc.
Black powder-coated steel, attractive honeycomb design.
Includes rubber with which you can, for example, attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
Carburetor cover "AT design prototypes" KEIHIN PWK 33-35-38-39-41
For KEIHIN PWK Carburetor 33-35-38-39-41
Carburetor cover hinged horizontally and vertically (to avoid abnormal tensions on the throttle cable)
VHSB 37 DS flat valve
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - left side
All models
The CGM 265 MICRO is the full-face helmet designed specifically for young motorcyclists. Created to offer the perfect blend of maximum protection and absolute comfort, this model stands out for its extraordinary lightness, crucial to avoid straining the neck of the little ones while riding.
Safety meets style: with modern and captivating graphics, wearing the helmet becomes fun for young bikers, while sizes specific for children and teenagers ensure a stable, precise, and secure fit.
Why choose it: Strengths
Exceptional Lightness: With an average weight of only 1050 gr, it minimizes cervical fatigue.
Visibility and Safety: Interiors equipped with high-visibility reflective bands for safe travel even in low light conditions.
Perfect Climate: Air Stream System ventilation with 3 zones and internal ducts for dynamic and constant air circulation.
Maximum Practicality: Quick-release visor and fully removable and washable interiors for hygienic and quick maintenance.
Technical Specifications and Comfort
The CGM 265 MICRO does not compromise on the features of adult helmets, adapting them to a junior format:
Long Swinging Vis
Color: Glossy white
TECHNICAL DATA SHEET:
- Outer shell in thermoplastic
- Scratch-resistant paint
- Internal extra smoked visor
- Removable and washable cheek pads
- Micrometric closure
- Removable peak
- Anti-theft ring on the strap
KIT Black Sleeve by the Meter TEFLON for Vespa 50/90/125/150/160/180/200
All Models
With an internal Teflon tube that facilitates the sliding of the wire
External Diam. 5 mm
Internal Diam. 2.5 mm
This hand cleaner paste is specifically designed to naturally remove paints, adhesives, glues, synthetic components, and other difficult-to-remove stains, thanks to the action of walnut powder. "Paint & Graffiti" removes all types of paints and petroleum-based product stains. It eliminates ink, toner, pen/marker, glue, adhesives, primer stains, and much more without using chemical or petroleum-based products that could be harsh on the skin. The essentially natural product contains water, walnut shells (produced by a tree commonly known as the soap tree), citrus-based cleaning agents, and six types of emollients that ensure excellent immediate results. A small portion of the product removes any type of dirt and odor, leaving a delicate citrus scent and providing extraordinary softness to the skin. โข Easily removes paint, ink, pen marks, adhesives, and much more. โข The most effective method to remove paint and petroleum stains from hands. โข The product is 100% natural without the use of solvents. โข Contains special emollients and conditioners. โข 50% more effective than any other soap. โข USDA Certified. 100% Natural โข Uses washing nuts, the only natural abrasive in the world. โข Uses only natural citrus fragrances.
The 107A is the reference model of the CGM brand, halfway between a
demi-jet and a jet, it is quite covering but at the same time
extremely compact and lightweight. Ergonomic and comfortable helmet, it is
made in two shell sizes in thermoplastic material to
offer optimal fit and wearing comfort for all
sizes. It is also equipped with a ventilation system with perforated interiors
with metal nets, visor with multi-click movement and with
bayonet fastening system. The interiors and cheek pads, made in soft and
soft hypoallergenic fabric, are also completely and easily
removable and washable.
Compact and lightweight demi-jet helmet with removable visor
with buttons, easy to store in the under-seat compartment due to its size.
ECE-R 22.05 APPROVAL
SIZES: XS (53-54cm), S (55-56cm), M (57cm), L (58cm), XL (59cm)
SIZES: (continued) L (58cm), XL (59cm)
AVERAGE WEIGHT SIZE M: 990 +/- 50gr
THERMOPLASTIC SHELL
SCRATCH-RESISTANT PAINT
VISOR WITH BUTTONS
REMOVABLE CHEEK PADS
MICROMETRIC BUCKLE
ANTI-THEFT RING ON THE STRAP
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the metal front air vents and the rear shell cuts that also house the air extractors. The thermoformed interiors, completely removable and washable, are equipped with a removable chin strap and neck collar with zip, and in all graphic variants, are embellished with vintage-style brown eco-leather details. The PIX can be equipped with a long visor for greater wind protection or with a modern-shaped visor, the interchangeable visors share the fastening system which, in the graphic versions, is made of metal. The helmet's equipment is completed by the micrometric buckle, the anti-theft ring, the strap holder elastic, and in the graphic variants, the rear goggle strap.
The 107A is the reference model of the CGM brand, halfway between a
demi-jet and a jet, it is quite covering but at the same time
extremely compact and lightweight. Ergonomic and comfortable helmet, it is
made in two shell sizes in thermoplastic material to
offer optimal fit and wearing comfort for all
sizes. It is also equipped with a ventilation system with perforated interiors
with metal nets, visor with multi-step movement and with bayonet
fastening system. The interiors and cheek pads, made of soft and
hypoallergenic fabric, are also completely and easily
removable and washable.
The 107A is the reference model of the CGM brand, halfway between
a demi-jet and a jet, it is quite covering but at the same time
extremely compact and lightweight. Ergonomic and comfortable helmet, it is
made in two shell sizes in thermoplastic material to
offer optimal fit and wearing comfort for all
sizes. It is also equipped with a ventilation system with perforated interiors
with metal meshes, visor with multi-click movement and bayonet
fixing system. The interiors and cheek pads, made of soft and
comfortable hypoallergenic fabric, are also completely and easily
removable and washable.
Engineered from its predecessor 107 FLORENCE, the 167 FLO
is the new benchmark for your urban journeys. Designed in 3
external shell sizes and a total of 8 sizes, it ensures maximum
fitting comfort combined with safety, lightness, and compact design.
Characterized by the interchangeability of the visor: long, for greater
wind protection or shaped, for a more captivating look.
It features the AIR STREAM SYSTEM ventilation system, hexagonal
thermoformed interiors with fully removable and washable ExtraCool fabric
with high visibility bands. The features are completed by the
anti-theft ring on the strap, the micrometric buckle, and the strap
retaining elastic.
ECE-R 22.06 APPROVAL
SIZES: XXS (51-52cm), XS (53-54cm), S (55cm), M1 (56cm),M2 (57-58cm), L (59cm), XL (60cm),
Vespa ET2/ET4/LX/LXV/S, 50cc, 2T/4T
l=732 mm
l=18.5 mm
a=8 mm
Multifunction spray, lubricant and protective.
Thanks to its semi-fluid consistency, it penetrates the most difficult-to-reach areas, lubricating and protecting. Ideal for chains, hinges, and other metal components that require protection and lubrication. Its high resistance makes it ideal for bicycle and motorcycle chains with and without "O" rings.
M7 MD Racing nuts (4pcs) for VESPA stud bolts 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150
Vespa 125
Vespa 150
Special solid nuts for Vespa cylinder prisoners.
They have a height of 10mm compared to the 7mm of commercial ones.
Classic 11mm hexagon made from solid and a 13.8mm ring underneath to rest on a larger surface.
4 pieces
Preloaded washers M7 MD Racing (4pcs) for VESPA 50 - 90 - 125 PRIMAVERA - ET3 - PK 125 - PK 125 XL - PX 125/150 - PXE ARC. - GTR 125 - SUPER 150 - SPRINT VELOCE 150 studs
Vespa 50
Vespa 125
Vespa 150
Special harmonic steel washer kit with preload
specifications to compensate the play of thermal excursions of Vespa cylinder studs.
These washers are completely compressed at 1.3kgm (tightening of Vespa studs)
and compensate for the loosening of studs subjected to heating.
Dimensions:
inner diameter 7.5mm
outer diameter 16.8
thickness 1.8mm
washer height at rest 2.18mm
excursion approximately 0.38mm