Vespa 200
Removes contaminant deposits from: butterflies, mono injectors, E.G.R. valves, carburetors. Ideal for cleaning external and internal parts. Cleans without the need for disassembly.
Flat type cross with reinforced thread VMC for Vespa PX 125/150/200 Arcobaleno 2°/'98/MY/'11/T5/Cosa adaptable to LML Star 125-200 2T/4T/Deluxe 2T/4S
Vespa 125 PX VNX2T 232053>
Vespa 125 T5 VNX5T
Vespa 125 Cosa
Vespa 150 PX 624302>
Vespa 150 Cosa
Vespa 200 PE VSX1T 315267>
Vespa 200 Cosa
Reinforced Flat VMC Cross for Vespa large frame, PX '84, MY, T5, COSA
Made of special steel with related vacuum carburizing treatment with a surface hardness of 56/60 HRC
A chamfer has been machined on the corners of the cross ends to preserve the integrity of the gears and the selector
The cross has slightly increased dimensions compared to the original ones, which might require small adjustments to be made on the wheel axle before assembly.
Vespa PX
Vespa PE
Gas-pressurized rear shock absorber (Nitrogen) with separate compensation reservoir.
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PX, Vespa 150 PX, Vespa 200 PX, Vespa PX Arcobaleno
Rear Shock Absorber
ADJUSTMENT
The continuously adjustable millimetric ring for spring preload and the knob with clicks (12 clicks) for Compression damping adjustment allow you to customize the suspension setting according to your needs and riding preferences.
Tapered needle carburetor Dell'orto for SI 20.15/17-20.20/24.24/26.26D/E/G/PHB Vespa 125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Vespa 125 from '59 (excluding Primavera ET3)
Vespa 150 from '59
Vespa 160
Vespa 180
Vespa 200
Square section
Vespa PE 200
Vespa 200 Rally VSE1T
Painted
All models/All models
Chrome Tubular Shield Edge premium version for Vespa 180 SS VSC1T-Rally VSD1T-200 Rally VSE1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
polished stainless steel
Clutch side oil seal 31x62.1x5.8/4.3mm BGM in FKM/Viton (E10/ethanol resistant) brown rubber
Vespa 125/150/200 PX
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
Socket: ba20d
Side stand SIP 82° with black stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=245 mm
aluminum
black
with 2 springs, self-folding
SIP side stand 82° with red stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=245 mm
aluminum
red
with 2 springs, self-folding
SIP 76° side stand with chrome stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=205 mm
aluminum
chrome
with 2 springs, self-folding
All models / Tutti i modelli
Polini Evo ignition fan for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE
Vespa PX
Vespa PE
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.4 Kg
Chromed Cuppini Perimeter with Blue Pattern for Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/180 SS/Rally
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Complete with footrest bracket
Vespa 180/200 Rally-PX
In aramid
for models with mixer
Spare wheel holder for Vespa 50 Special V5B1-3/SS/90 Racer/100 2°/SS/125 Primavera/ET3/125 GT/GTR/TS/150 VGLA-B/GS VS5/GL/Sprint/V
Vespa 50 Special V5B1>4T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
197 mm
For 10-inch wheel
Painted grey
Base gasket and fixing screws included
Footrest bracket m16 GP racing parts in Black for Piaggio Ciao/SI/Bravo
Piaggio Ciao/SI/Bravo
The aluminum bar, of high strength, due to its 16mm diameter, provides a stable base for the knurled footpegs, a design that ensures excellent grip and super effective non-slip for both shoes and asphalt and off-road boots.
The footpegs are mounted directly onto the bar and secured using a nut-against-nut system, with the insertion of a washer that prevents loosening. To ensure further security, it is advisable to apply a minimal amount of threadlocker on both sides. The assembly requires only two wrenches: one 22 mm and one 20 mm.
Once properly secured, the footrests will remain stable and safe, requiring very little maintenance.
The knurled footrests are available in five colors:
-timeless aluminum color
-black, elegant and timeless
-gold, for a touch of luxury
-red, bold and gritty
-blue, lively and modern
Gear selector prisoner m7x50 for Vespa 125-200 VNA-VBA-GT-TS-PX T5/Cosa
Vespa 125-200 VNA-VBA-GT-TS- PX T5/Cosa
Original Piaggio Turn Signal Relay For Vespa 125/150/200 PX-PE New Model 2011-2012
Vespa PX
Vespa PE
Vespa PX Arcobaleno
Vespa Cosa
Vespa PK all types
6-12 VOLT, 10/21 WATT
for VHSB/VHSC carburetor
for VHSB/VHSC carburetor
Bolt for starter pedal fastening for Vespa 125 VNB/GT/GTR-150 VBB/Super/GL/160 GS/180SS/Rally
Vespa 125 VNB4>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T> 146200
Vespa 125 Super VNC1T
Vespa 150 VBB2T
Vespa 150 Super VBC1T> 428216
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T > 0035413
Finish: Galvanized
Luggage rack with backrest and handles, chrome for Vespa PX80-200/PE
Vespa PX
Vespa PE
With padded backrest and handles.
Fastening with tank bolts.
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
Vespa 125 GTR VNL2T from 1971
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T from 1971
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Kit for a scooter
Black (290 cm)
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
Brake shoe pair Fa Italia for Vespa 125/150/160/180/200 GT-GTR-TS-Sprint-Sprint Veloce-GS-Rally-SS
Vespa 125 VNL2T GT
Vespa 125 VNL2T GTR
Vespa 125 TS VNL3T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GS VS1T (Anteriore e posteriore/Front and rear)
Vespa 150 GS VS2T (Anteriore e posteriore/Front and rear)
Vespa 150 GS VS3T>35310 (Anteriore e posteriore/Front and rear)
Vespa 150 GS VS4T
Vespa 150 GS VS5T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 125 VNB5T 026921>
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBB2T 212457>
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T 67470> 79074
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Dimensions-->12.5x20x22x5.5mm
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 150 PX VLX1T Millennium '98
Vespa 200 PE VSX1T Millennium '98
Complete headlight with original Piaggio reflector for Vespa 125/150/200 PX MY
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 150 PX VLX1T Millennium '98
Vespa 200 PE VSX1T Millennium '98
Cooling spray -WEICON- 400ml for quick installation of ball bearings
All models
Weicon COLD SPRAY, 400ml, ideal for quick installation of ball bearings.
WEICON Cold Spray is versatile and suitable for troubleshooting in the field of electronics and for repairs in the industrial sector.
Metal components such as ball bearings, bushings, chain links, shafts, etc. can be inserted into the tightest of fits with WEICON COLD SPRAY
Vespa 50/90/125/150/200 PX-Special
Front brake and clutch protection bellows Vespa 125 VNA-TS/150 VBA-Rally/PX80-150X/PX80-200E/Lusso/'98/MY/'11/T5/LML Star 125-200 2T/4T
Vespa 80/125/150/200 PX T5
All models / Tutti i modelli
Buzzer