Vespa 150 VBB2T
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Tightening with 14 mm wrench
a=95 mm
Ø 85 mm
ceramic
red
in gift box
Vespa 50/90/125/150/200
Driven metal clutch disc for Vespa 125 VNA2T 081469 ->/VNB/GT/GTR/TS/Super/150 VBA/VBB/VGLA-B/GL/Sprint/V/Super/PX80-150/PE until 1994
Vespa 125 VNA2T 081469 >
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 PX VNX1T > VNX2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX 150 E VLX1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 GL VLA1T
Thickness: 1.5 mm
SIP classic bag/luggage in hazelnut color
480x300x270 mm
approx. 35 l
nylon
beige brown RAL 1011
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
In neoprene, to be glued.
Thickness---> 5 mm
Pair of brake and clutch levers for Vespa 50 N/L/R-125 Primavera-GT-VNB-VBB-GL
Vespa 50 V5A1T N/L/R > 867168
Vespa 50 S V5SA1T > 63165
Vespa 50 SS V5SS1>2T
Vespa 90 V9A1T>101995
Vespa 90 SS V9SS1>2T
Vespa 125 VMA1T
Vespa 125 VMA2T>108544
Vespa 125 VNB5T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 150 VBB2T 184569 >
Vespa 150 Super>292115
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 160 GS VSB1T 44239 >
Vespa 180 SS VSC1T
Lucide without ball
Manufacturer: FA ITALIA
All models
JET HELMET - CITY ONE
Outer shell made in two sizes
Thermoplastic material
Retractable sun visor
Wind tunnel tested
Maximum silence
Maximum comfort
Maximum safety
Pinlock ready
Bluetooth ready
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PX/Rally/Cosa
Kit Consists of: Reinforced springs and perforated cups.
DEXTER racing clutch plate with axial thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Dell'orto SI 20/20 MIX Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Complete chrome luggage rack for Vespa 50-125 Primavera-ET3Rally180, Vespa Rally200, Sprint150, TS125, GT125, GTR125
Vespa 50/90/125/150/160/180/200
Oil can support - luggage rack for inner shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Measurements---> L 13.5 cm H18.5 cm
Vespa 50/90/125/150/160/180/200
l=640 mm
l=270 mm
in recycled truck tarpaulin
black
empty, without tools
RDV swivel engine stand adapter from vise for Vespa 125/150/160/180/200 VNB-VBB-GT-GTR-TS-Sprint-GL-Rally
Vespa 125/150/160/180/200 VNB-VBB-GT-GTR-TS-Sprint-GL-Rally
1 mm base clutch cover for Vespa VNA-TS/150 VBA-Super/Rally/PX80-200/PE-Lusso/Cosa/T5
Vespa VNA-TS/150 VBA-Super/Rally/PX80-200/PE-Lusso/Cosa/T5
Size: 80x50cm (check the size before purchasing)
Helical gear clutch group Z 23 (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS- VBB-GL-Sprint -PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm
Extremely compact and lightweight demi-jet, it differs from the classic
spherical helmet thanks to the front metal air intakes and the rear
shell cuts that also house the air extractors. It is
equipped with fully removable and washable thermoformed interiors and is
available with a long visor or with a shaped visor that share the
fastening system.
Tool for mounting/dismounting silent-block for Vespa 125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-150/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-150/PE/Lusso/'98/MY/'11/T5/Cosa
Oil can support - luggage rack for internal shield right and left side -RDV- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, such as Sprint, V50, Primavera, VNB, VBB etc.
Black powder-coated steel, attractive honeycomb design.
Includes rubber with which you can, for example, attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
SIP 70's Chrome Rear Luggage Rack for Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/160 GS 2°/180 SS/Rally
Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/160 GS 2°/180 SS/Rally
Dimensions: 30x20 cm
Lamellar intake manifold DEXTER racing for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
For carburetor PHBH 28/30/VHS 24-30/TMX 27/30/PWK 28/30
passage: 30mm
carburetor connection: 34mm
DEXTER racing intake manifold with valve for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
For carburetor PHBH 28/30/VHS 24-30/TMX 27/30/PWK 28/30
passage: 30mm
improved inclination to keep the carburetor as flat as possible
Silent-block engine crossbar Dexter racing (soft) in aluminum/polyurethane, for original Piaggio engine casings for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
-rubber pads with calibrated hardness of your choice
-4 shims for load calibration during assembly
-threaded aluminum tubes for very easy assembly
Vespa 125 V30T> 33T
Vespa 125 VM1T> 2T
Vespa 125 VNB1T 032100>
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 150 VL1T> 3T
Vespa 150 VB1T> 61420
Vespa 150 VBA1T 81257>
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T -
Vespa 150 GL VLA1T
Vespa 150 GS VS1>5T
Vespa 180 SS VSC1T
Measurements: 26x34
Material: rubber or cork
Base gasket for speedometer in grey color for Vespa 125 GT/150 Sprint-GL-VBA-VBB/160 GS/180SS
Vespa 125 GT VNL2T, Vespa 150 Sprint VLB1T, Vespa 150 VBA1T, Vespa 150 VBB1T > VBB2T, Vespa 150 GL VGLA1T, Vespa 150 GL VGLB1T, Vespa 150 GS Vespa 160 GS
In rubber, color grey
Polini HT FOR RACE Z 22 clutch gear for primary Z64 straight teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Stage 6 F1 Carbon Look Glossy Rearview Mirror (SX) for Vespa 50/90/125/150/180/200
Vespa 50/80/90/125/150/180/200
Threading M8x20
Crankshaft oil seal with square notch flywheel side CORTECO 20x40x6 mm for Vespa 125 VNA2 2°/VNB/GT/GTR 1°/Super/TS 1°/150 VBA 2°/VBB/VGLA/B/GL/Super 1°/Sprint/V 1°
Vespa 125/150
Rear sheet metal central tunnel Carlucci for Vespa 125 VNA/VNB/GT/GTR/TS-150 VBA/VBB/GL/Sprint/PX/Rally/SS
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Width: 22/26 cm Height: 7/10.8 cm
Already welded on the joint
Carburetor cover "AT design prototypes" KEIHIN PWK 33-35-38-39-41
For KEIHIN PWK Carburetor 33-35-38-39-41
Carburetor cover hinged horizontally and vertically (to avoid abnormal tensions on the throttle cable)
VHSB 37 DS flat valve
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - left side
All models
Elastic support for BGM PRO shock absorber for Vespa 50/90/125/150/200 PX-PE-Sprint-GT-GTR-TS
Vespa 50, Vespa 90, Vespa 125 from 1958, Vespa 150 from 1958 (excluding Vespa 150 GS), Vespa 160, Vespa 180, Vespa 200
PINASCO unit conversion from points to electronic for Vespa 50 N/L/R-Special-125 Primavera/Sprint-Super-GT/GTR/TS/Rally/SS/LML
Models with points ignition
For conversion to electronic ignition
Pinasco has developed a control unit that converts engines with point ignition into engines with electronic ignition without having to replace the original components. By removing the capacitor and connecting the control unit in parallel with the original high voltage coil, it is possible to perform the conversion without invasive modifications to the engine or the electrical system; the points are not removed, they become the pick-up signal.
Adjustable sport fork spring for Vespa 125/150/200 V30-VM-VN-VNA-VNB-GT-GTR-TS-VBA-VBB-VB1-GL-Sprint-Sprint Veloce
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK, PX, PE
Complete transmission kit with rectangular core sheaths and Teflon VZR Special Parts in grey color for Vespa 125 VNA1>2T/VNB1>5T/150 VBA1T/VBB1>2T
Vespa 125 VNB1>5T/150 VBA1T/VBB1>2T
Sheaths with rectangular wire core, designed to eliminate the elasticity typical of cylindrical wire cores.
The internal PTFE coating, combined with artisanal craftsmanship, ensures optimal smoothness and long-lasting durability.
This kit contributes to a smoother clutch and precise shifting.
Suitable for: gear shift, clutch, throttle, and front brake.
The kit includes: cables, terminals, and clamps.
The clutch and front brake cables are equipped with a swivel bushing, which facilitates the correct positioning of the cable, preventing twisting.
The clamps for gear shift and clutch are clamping type, with a brass pad for secure and reliable holding.