Vespa 150 VBB1T
Tapered needle carburetor Dell'orto for SI 20.15/17-20.20/24.24/26.26D/E/G/PHB Vespa 125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Vespa 125 from '59 (excluding Primavera ET3)
Vespa 150 from '59
Vespa 160
Vespa 180
Vespa 200
Square section
All models/All models
Complete clutch BGM Pro Superstrong CNC Z 22 for elastic gear 67/68 teeth Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
BGM PRO Super Strong clutch What is a plug and play solution - Made
in Germany. You get a ready-to-install clutch product with reinforced
clutch springs which works well in a power range up to 20hp / 22Nm.
With separately available stiff springs, the clutch does not disappoint, even with configurations of more than 40 hp.
Stainless steel screw kit with hex head for fan cover mounting for Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Vespa 50 N/L/R-Special-125 Primavera ET3/Sprint-Super-GT/GTR/TS/Rally/SS/PX/PE/LML
Kit consisting of 3 Mx10 screws
Vespa 150 GS VS2>5T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 150 VBB1T
Vespa 180 SS VSC1T (only models with battery)
Direct current 6V
Models with battery
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
SIP 76° side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
chrome
with 2 springs, self-folding
SIP 76° red stem side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
red
with 2 springs, self-folding
All models / Tutti i modelli
Chrome full wheel Made in Italy for Vespa 98/125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Included: M8 Nuts (11 mm wrench) and washers Finish: Chrome
Size: 3.50/8
All models
Graft Hole: 5 mm
Chromed Cuppini Perimeter with Blue Pattern for Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/180 SS/Rally
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Complete with footrest bracket
Rear wheel drum FA Italia for Vespa 125 V1-33T/VM/VN/VNA/VNB/150 VL/VB1/VBA/VBB
Vespa 125 VNB
Vespa 150- VBB
Internal diameter: 126 mm
Black "Comfort" complete seat for Vespa 125 GT/GTR/TS-150 Sprint/S.Veloce-180 SS
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 SS VSC1T
Two-seater, sheet metal base with foam, with handle, without lock
Very comfortable and similar to the original version.
Left footrest platform Made in Italy for Vespa V30-33/VM/VN/VNA-TS/150 VL/VB/VBA/GS VS1-5/160 GS/180 SS/Rally/PX/T5
All vintage models / Tutti i modelli vintage
Chromed
Screws and internal bag reinforcement plate
Footrest bracket m16 GP racing parts in Black for Piaggio Ciao/SI/Bravo
Piaggio Ciao/SI/Bravo
The aluminum bar, of high strength, due to its 16mm diameter, provides a stable base for the knurled footpegs, a design that ensures excellent grip and super effective non-slip for both shoes and asphalt and off-road boots.
The footpegs are mounted directly onto the bar and secured using a nut-against-nut system, with the insertion of a washer that prevents loosening. To ensure further security, it is advisable to apply a minimal amount of threadlocker on both sides. The assembly requires only two wrenches: one 22 mm and one 20 mm.
Once properly secured, the footrests will remain stable and safe, requiring very little maintenance.
The knurled footrests are available in five colors:
-timeless aluminum color
-black, elegant and timeless
-gold, for a touch of luxury
-red, bold and gritty
-blue, lively and modern
Specifically designed for wire exchange
The brass pad does not mark the wire.
Gear selector prisoner m7x50 for Vespa 125-200 VNA-VBA-GT-TS-PX T5/Cosa
Vespa 125-200 VNA-VBA-GT-TS- PX T5/Cosa
Complete sport RDV Race one seat in black with black stitching for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE first series
The brand new " RDV race one " sport saddle is a perfect combination of sporty aesthetics (black stitching, sporty seat in harmony with the Vespa curves) and good comfort (metal base, 2.5 cm foam for the seat), innovative magnetic closure to ensure the best aesthetic result, entirely designed and conceived by our Staff, made with the technical support of the company Nisa SRL. 100% MADE IN ITALY
Note: For PX/PE models, it fits perfectly ONLY on tanks with a wing nut cap.
For PX/PE Arcobaleno models with a quick release cap, it can be installed by removing or lowering the central buffers provided (otherwise the central part touches before the rear part)
In the new model, the RDV logo is embossed on the rear.
2 Carbon Plates Kit MALOSSI 100x100mm (thickness 0.3mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
for VHSB/VHSC carburetor
Bronzed
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
In galvanized metal
Tank and seat fastening
Tank and seat fixing
5 Pcs Kit
Zincate, 10 pieces
for VHSB/VHSC carburetor
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
All Models / Tutti i modelli
Shield anchoring
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
SIP BE2 emulsifier for SI 20.15-17 A-D/20.20-26.26E/G/H/27.23
Vespa 80/125/150/200
For carburetors type SI
FAR Vintage Classic Rearview Mirror – Left/Right Shield in Black Color
All Models
Anchoring to the shield
Ariete engine oil seal KIT for Vespa 125 VNB/GT/GTR/Super-150 VBA/VBB/GL/Sprint/Super
Vespa 125 VNB1T > VNB6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T >145900
Vespa 125 TS VNL3T >18138
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T >294259
Vespa 150 VBB1T > VBB2T
Vespa 150 VBA1T
Vespa 150 GL VLA1T
Note: Included OR
100% Viton
BGM PRO BigBox TOURING V2 (BBT2) Exhaust for Vespa PX80, PX125, PX150, Sprint, GT, GTR
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
The performance level and ground clearance have been significantly increased compared to the previous version.
The new Touring revs significantly higher than the previous BBT.
The exhaust pipe has been expanded from Ø18 mm to Ø20 mm. However, to reduce noise levels, the BBT2 is equipped with an exhaust insert inside the Ø20 mm pipe with Ø18 mm.
This section is sufficient for almost all engines up to 190cc and about 22-25HP (this value varies depending on the engine structure and achievable RPM).
Those driving a very powerful setup with a high continuous RPM can remove the Ø18mm exhaust insert, which is fixed with just one weld point, and thus have the full Ø20mm section.
Increase the main jet by 4-6 points
Vespa all models/All models