Vespa 150 VB1T
Single internal compartment with laptop compartment
External pocket with zip
Dimensions: 40x35 cm
All models
For stroboscopic visualization of timing marks
Usable on 4 or 2 stroke engines up to two sparks per revolution.
L 310 x W 285 x H 110 mm
12-month warranty
Supplied in a plastic case complete with cables and rubber shockproof cap and connection clamps
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
mm 6x31
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
Size:3.50-8 Load index: 45J
a=80 mm
Ø 80 mm
steel sheet, enameled
white/green
Ø 310 mm
400x300 mm
blue/white/red
with a quartz clock mechanism, the battery is not included in the package
Vespa 125 VN2T
Vespa 150 VL2T > VL3T
Vespa 150 VB1T
Thickness: 1 mm
Dust cover washer lower race for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 from 1954 all
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Internal diameter: 34.4 mm
External diameter: 63 mm
DRT clutch bushing for Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All models / All Models
Material: Brass
External diameter 28 mm
Internal diameter 24 mm
Thermal group without head for competition 151cc Low beam for Vespa 125/150 VN-VM-VB1-VL1>3T
Vespa 125/150 VN-VM-VB1-VL1>3T
For VN and VM series, a 57-stroke crankshaft and compensation spacer are required
nodular cast iron
3 transfers
Ø 57.0mm
stroke 57mm
without cylinder head
Vespa 98
- Vespa 125 from '48 to '65
- Vespa 150 from '54 to '66
3.50/8,4.00/8
90-degree valve
Michelin Inner Tube 8 B 1 for Vespa 98/125 V30>33T/VM/VN-150 VL1>3T/VB1T/VNA/VNB/VBA/VBB
Vespa 98
- Vespa 125 from '48 to '65
- Vespa 150 from '54 to '66
45-degree valve
Size: 3.50/8, 4.00/8
Elastic ring for starter sector for Vespa 125 VN/150 VL/VB/GS VS1-5
Vespa 125 VN 06001 ->/150 VL/VB/GS VS1-5
Premium felt pad holder for contact lubrication for Vespa 50-125/PV/125 VM-TS/150 VL-Super/160 GS/180 SS/Rally/P125-150X/P150S
Vespa 125/150/160/180/200
Compact and lightweight> Style, simplicity, and nods to the past for a modern product> Lexan® lens, total UV radiation protection> CarbonX foam for quick sweat dissipation> Made in Varese, Italy> Carbon Neutral mask with Climate Partner certification> CETELAIO certified mask> Medium size> ABS material / polycarbonate frame> Anti-UV colorsLENS> Photocromic Lexan® lens CE certified, cat.0->1> Mirror lens - light sensitive> No optical distortion> Best anti-fog treatment> Total UV protectionVENTILATION> A.V.S. Ariete Ventilation System> Front air intake> Open filtersFOAM> 3-layer seal composed of:> 1st layer made of closed-cell technical foam> 2nd layer made of supersoft open-cell technical foam> 3rd layer made of hypoallergenic CARBON X layer in contact with the skinELASTIC> Elastic with anti-slip silicone> Double buckle for quick adjustment
Metal keychain inspired by the silhouette of the back side of the Vespa.
Dimensions: 6x2x0.7 cm
Magnetic tray workshop diameter 4 cm for all scooter/Vespa models
All models
Magnetic tray workshop diameter 15 cm for all scooter/Vespa models
All models
Standard Elastic Cords - Ø 10 mm - 2x100 cm (can be shortened as needed)
All models
Vespa 98
- Vespa 125 from '48 to '65
- Vespa 150 from '54 to '66
90-degree valve
3.50/8,4.00/8
Material: Fabric
Trayal Tire 3.50/8 (Michelin S 83 design) for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
3.50/8
Black
Rear shock absorber adapter -BGM PRO R1, R12, BGM7782, BGM7742 - Vespa PX, V50, PV, ET3 -
Vespa PX, V50, PV, ET3
The adapter is securely screwed to the shock absorber and secured against loosening with the screw lock. The lower M16x1 thread fits all rear shock absorbers bgm Pro of the R1 and R12 series. The upper M9 thread is screwed directly to the shock absorber with a suitable spacer or to the silent block.
Engine block fusion silent block MD Racing internal hole 9mm - red model - for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125 Primavera ET3
Vespa 50/125 PK
Vespa 125 VN1T 06001>
Vespa 125 VN2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa
Calibrated polyurethane foam air filter with polyester-based double layer (inner 15 ppi h 10mm, outer 60 ppi h 5mm), gasoline-resistant PVC sleeve, galvanized collar with anti-cut edges. This pore size is particularly suitable for competitive use.
Single internal compartment with laptop section
Dimensions: 40x30x12 cm
Pair of stays for Cuppini front luggage rack for Vespa 125 GT/GTR/TS/150 125 GT/GTR/TS/150/GL/Sprint/V/T4/160 GS 2°/180 SS/Rally
All models / Tutti i modelli
For luggage rack anchoring our code 09-CW-016-CU
Pair of complete rods for Cuppini front luggage rack for Vespa 125 GT/GTR/TS/150 125 GT/GTR/TS/150/GL/Sprint/V/T4/160 GS 2°/180 SS/Rally
All Models
For roof rack anchoring
All models
Vespa 50/90/125/150/180/200
Stem length--> 200 mm, shell diameter 125 mm
Domed plastic shell
Bronze bushing for clutch curl SIP for Vespa Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All models / All Models
Material: Bronze alloy
Outer diameter 28 mm, inner diameter 24 mm, thickness 17.4 mm
Premium quality
Main feature: Lubrication channel around its circumference.
Shock absorber fixing bolt M9X75 for Vespa 125 VNA–TS/150 VBA-Super/160 GS/180 SS/Rally/P80-150/200E/Lusso 1°
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Size: M9x 75 mm
wrench 14mm
steel, galvanized
8.8
for mounting the exhaust system on the right (specific exhausts that use the same bolt to secure the shock absorber and the muffler.)
Drum wheel hub flange with 8 "SIP Road" studs for Vespa 125/150 V30/33TVM-VN-VL-VB1T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
M8x16mm fine threading
Ø 31.5 mm
incl. sphere and 2 brake pistons
Dell'Orto PHBL Ø 24 carburetor with Parmakit filter calibrated for thermal group CCcorsa Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Attention---> Calibration set for 160 and 175cc CCcorsa cylinder. (slide, needle, main jet)
Select the displacement in the dropdown menu to receive the correctly set carburetor.