Spare parts and accessories for Vespa 125
Explore the largest online catalog of spare parts and accessories for Vespa 125, the beating heart of Piaggio's history. Whether you own a rare Vespa 125 Faro Basso or VNB, a legendary Primavera ET3, an elegant GT/GTR, or the timeless Vespa PX 125, here you will find everything you need for your restoration. Our selection covers every era: from the 'grandmothers' of the 1950s to Smallframe and Largeframe, offering high-quality mechanical components, electrical parts, and bodywork. Get your 125 back on the road with reliable and specific spare parts for each frame code.
Bracket Kit for Coil Support and VZR Regulator Vezzola Racing for Sip Vape Ignitions for Vespa 125 V1>15T/V30>33T/VM1>2T/VN1>2T-150 VB1T/VL1>3T-GS VS1>5T
Vespa 125 V1>15T/V30>33T/VM1>2T/VN1>2T-150 VB1T/VL1>3T
The kit includes: Bracket, nuts, washers, bushings with anti-vibration mounts, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Material: Stainless steel
Bracket Kit for Coil Support and VZR Vezzola Racing Regulator for Sip Vape Ignitions on SIP and Piaggio Carter for Vespa 50/125 PK HP
Vespa 50/125 PK-HP
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Material: Stainless steel
Bracket Kit for VZR Vezzola Racing coil support and regulator for IDM or VMC ignitions for Vespa 50/90/125 Special/N-L-R-Primavera ET3
Vespa 50/90/125 Special/N-L-R-Primavera ET3
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with faston and connectors.
System designed to accommodate all components in an organized, protected, and convenient way.
Assembly instructions included.
Material: Stainless steel
VZR Vezzola Racing Coil Support Bracket and Regulator Kit for Sip Vape Ignitions on Quattrini C1 Engine Case for Vespa 50/125 PK-S-XL-N-HP
Vespa 50/125 PK-S-XL-N-HP
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with fastons and connectors.
System designed to accommodate all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Material: Stainless steel
Coil Support Bracket and VZR Vezzola Racing Regulator Kit for Sip Vape Ignitions on Quattrini C1 Casings for Vespa 50/90/125 Special/N-L-R-Primavera ET3
Vespa 50/90/125 Special/N-L-R-Primavera-PK
The kit includes: Bracket, nuts, washers, bushings with anti-vibration mounts, wiring with faston and connectors.
System designed to house all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Bracket Kit for Coil Support and VZR Vezzola Racing Regulator for Sip Vape Ignitions on Piaggio Engine Case for Vespa 50/90/125 Special/N-L-R-Primavera ET3
Vespa 50/90/125 Special/N-L-R-Primavera ET3
The kit includes: Bracket, nuts, washers, bushings with anti-vibration mounts, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Material: Stainless steel
Bracket Kit for Coil Support and Regulator VZR Vezzola Racing for SIP Vape Ignitions Vespa 125 VNB/Super/GT/GTR/TS-150 VBA/VBB/Sprint/V/GL-180/200 Rally
Vespa 125 VNB/Super/GT/GTR/TS-150 VBA/VBB/Sprint/V/GL-180/200 Rally
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with fastons and connectors.
System designed to accommodate all components in an orderly, protected, and convenient way.
Venturi Intake Cone Sil-tech Performance for Dellorto SHBC 19.19 E Carburetor
For Dellorto SHBC 19.19 E carburetor
The Dell'orto SHBC carburetor series features a cylindrical venturi duct. This shape, simple to produce during manufacturing, however, presents some efficiency issues.
The Siltech Performance Venturi cone has been designed to address the problem of turbulence generated by the cylindrical cone. Through various simulations with different shapes, a form has been achieved that optimizes the incoming air flow, eliminating turbulence and significantly optimizing performance.
An interesting fact is that it is possible to mount the dedicated Siltech Performance air box or the Polini air box (203.0019).
Transmission kit and clutch RACE version with rectangular core cables and black teflon VZR Special Parts for Vespa 50/125 PK S-XL-Rush-N
Vespa 50/125 PK
Sleeves with a rectangular wire core, even more efficient compared to the grey version, designed to eliminate the typical elasticity of cylindrical wire cores.
The internal PTFE coating, combined with artisanal craftsmanship, ensures optimal smoothness and long-lasting durability.
This kit contributes to a smoother clutch and precise shifting.
Suitable for: gear and clutch
The kit includes: cables, terminals, and clamps.
The clutch cables are equipped with a rotating bushing, which facilitates the correct positioning of the cable, avoiding twists.
The clamps for gear and clutch are clamping type, with a brass pad for secure and reliable hold.
Seiger elastic ring for hub bearing lock for Vespa 50 V5A1T N/L/R-Special-90-125 Primavera ET3-VNB and for multiple gear bearing for Vespa 125 GT 1°/3°/GTR/TS/150 GL 2°/150 Sprint 1°/3°/V/P125-150X 1°
Vespa 125/150
Complete GAS transmission for quick external mounting on the VZR Vezzola Racing handlebar for Vespa 125/150/200 PX-PE
Vespa 80 PX V8X1T >30160
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >44000
Vespa 150 PX VLX1T >410580
Vespa 200 PE VSX1T >138292
Complete custom-sized kit, high-sliding sheath with self-breaking cable clamp.
Complete transmission kit with rectangular core sheaths and Teflon VZR Special Parts in gray color for Vespa 50/125 PK S-XL-Rush-N
Vespa 50/125 PK
Sheaths with a rectangular wire core, designed to eliminate the elasticity typical of cylindrical wire cores.
The internal PTFE coating, combined with artisanal craftsmanship, ensures optimal smoothness and long-lasting durability.
This kit contributes to a softer clutch and precise shifting.
Suitable for: gear shift, clutch, throttle, and front brake.
The kit includes: cables, terminals, and clamps.
The clutch and front brake cables are equipped with a swivel bushing, which facilitates the correct positioning of the cable, avoiding twists.
The clamps for gear shift and clutch are clamping type, with a brass pad for secure and reliable holding.
Complete transmission kit with gray Teflon-coated housings for Vespa 50/125 PK S-XL-Rush-N
Vespa 50/125 PK
kit composed of:
2 gear cables
1 clutch cable
1 front brake cable
1 rear brake cable
1 starter transmission
Original Piaggio odometer for Vespa 125/150 LX ZAPM441-442-443
Vespa 125/150 LX ZAPM441-442-443
Ref.Orig: 58156R
Rubber plug for oil sight hole in the frame -PIAGGIO- for Vespa 125/150/200 PX-Rally with mixer
Vespa PX 125 E Rainbow
Vespa PX 150 E Rainbow
Vespa PX 200 E Rainbow
Vespa 200 Rally VSE1T
Rubber
VM Engineering Vsoft Stand Shock Absorber for Vespa 125 VNA/VNB-150 VBA/VBB-125 GT/GTR/TS-150 Sprint/S.Veloce/GL-160 GS/180 SS/Rally-200 Rally
Vespa 125 VNA/VNB-150 VBA/VBB
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
It installs easily under the Vespa footboard in a few minutes, without the need to modify or drill anything, thus preserving the originality of the Vespa to the maximum.
Advantages point by point
> Avoids the "kick" of the stand
> Prevents footboard breakage
> Installs in a few minutes
> Requires no drilling or modifications
> Is invisible
> Always works
Quality point by point
> Laser-cut galvanized frame
> Anodized aluminum sleeve
> Stainless steel rod
> Anti-friction bronze head
> Regenerable piston
> Completely rustproof
Shock absorber for VM Engineering Vsoft stand for Vespa 80/125/150/200 PX-PE-MY-T5
Vespa PX 125
Vespa PX 150
Vespa PE 200
Vespa Rainbow
It installs easily under the Vespa footboard in a few minutes, without the need to modify or drill anything thus preserving the originality of the Vespa as much as possible.
The Advantages point by point
> Avoids the kickstand "hit"
> Prevents footboard breakage
> Installs in a few minutes
> Requires no holes or modifications
> Is invisible
> Always works
The Quality point by point
> Laser-cut galvanized frame
> Anodized aluminum sleeve
> Stainless steel rod
> Bronze anti-friction head
> Regenerable piston
> Completely rustproof
Vespa PX 125
Vespa PX 150
Vespa PE 200
Vespa Rainbow
22 mm
Black
Feet
VMC key locks clutch basket and pinion for Vespa 50/90/125/Primavera//ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Original Piaggio luggage rack for Vespa 125 VNB6T/Super/GT/GTR/TS/PX-150 Sprint-PX-200PE
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX
Vespa PE
Mount cushion center distance 24 cm
Aluminum-colored flywheel cover for Vespa 125 VNA/VNB/GT/GTR/Super/150 VBA/VBB/GL/Sprint/Super
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
In metal, Aluminum color.
Powder coated
The brake cleaner is a product designed to quickly remove dust, dirt, oil, and brake fluid from brake and clutch systems. It dries in a few minutes and helps to extend the life of brake discs and pads.
KS TOOLS crimping pliers for uninsulated cable lugs and connectors from 0.75 to 6.0 mm²
All models
Vespa Cosa suitable also for LML Star 200 4T
MD Racing gear selector for Vespa 50 N/L/R-Special-90 V9A1T-125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera VMA1T>2T
Complete shock absorber Predieri & Abbate for Vespa 125/150/200 V30-VM-VN-VNA-VNB-GT-GTR-TS-VBA-VBB-VB1-GL-Sprint-Sprint Veloce
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK; PX, PE
Metal sheath, Chrome finish
12v 15w P26S Lamp for Vespa 50 PK S-XL-HP-FL2-RUSH/APE 50 FL-FL2
Clog: p26s
LML disc brake pump for LML Star 125-200 2T/4T/ Star 4T- Vespa 125/150/200 PX disc brake
Vespa PX Arcobaleno disc brake
Ø 12 mm
with screw fastening
Complete odometer black bezel for Vespa 125/150/200 PX 2nd series Arcobaleno
Vespa PX Rainbow Vespa PE Rainbow
Vespa 50 PK XL
Climbed at 120 KM/H
complete with light bulbs
BOSCH BATTERY FA1030 Factory Activated (AGM) 12V 9AH YB9-B for Vespa 125/150/200 PX-PE-Arcobaleno
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa PX disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Dimensions-->132x72x138 mm
Battery Bosch FA1030, code YB9-B.
.
BOSCH BATTERY M4 F25 12V 9AH YB9-B STARTING POWER 85A Vespa 125/150/200 PX-PE-Arcobaleno
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa PX disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Dimensions-->132x72x138 mm
Battery Bosch M4F25, code YB9-B.
The battery is supplied with a device containing pre-dosed acid for safe initial filling: it is therefore quickly ready for use and everything is included.
Symmetrical dual-light lamp (KRYPTON GAS) intense white light 12V 35/35W base: BA20d
Base: ba20d
Intense white light
Pair of footrests for Vespa 125 VNA/VNB1-2T ->09000/150 VL3/VB/VBA/VBB1T->17450/GS VS2-5
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1>2T > 09000
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T> 17450
Vespa 150 GS VS2T > VS5T
In rubber
Bronze bushing gear selector shaft SIP 32x27.5x8.9 mm for Vespa 125 VN/150 GS VS1-5/VL/VB/GL/VGL/ACMA GL
Vespa 125 VN/150 GS VS1-5/VL/VB/GL/VGL/ACMA GL
VN1T 06001 ->
standard nominal dimensions, plug and play in combination with a NEW crankshaft
Ignition coil support plate / CDI / voltage regulator -BGM Pro with helmet hook for Vespa 50-125/PV/ET3
Vespa 50 N/L/R-Special
Vespa 125 Primavera-ET3
Vespa PK50-125/S/XL/XL2
Adaptable to all "3 button" helmets
Adaptable to all "3 button" helmets
Original Complete Headlight Group TRIOM for Vespa 125/150/200 PX New Model
Vespa 125/150 PX New Model
Brand: TRIOM
Mounts H$ bulb (not included)
l=230 mm
l=150 mm
a=140 mm
black