Vespa 125 PK Automatic VVM2T
1L Package
Riveting tool for mounting platform strips and inscriptions, eyelets for horn
All models
Vespa PK50-125/S/XL/Automatic
Primary transmission gear pair Polini with straight teeth Z 24x72 (2.95) for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Z 24 X 72 with straight teeth
with shock absorber
Vespa 50/90/125/150/180/200
Rod length--> 150 mm
Diameter--> 110 mm
Approved E3
Thread of 8 mm
Vespa 50 PK FL/HP/N/XL2
Vespa 125 PK N/Automatic/XL2
Material: Plastic
Vespa 50 PK XL
Vespa 100 PK XL
Vespa 125 PK XL
Material: 100% Cotton
Material: 100% Cotton
– half-finger glove in genuine sheepskin
– aero 3D mesh insert on the back
– ergonomic shape
– easy to remove
– short cut on the wrist
– velcro adjustment on the wrist
Simple and intuitive interface with 3 buttons
Use without App
Functions: Music & GPS - Calls
Communication up to 2 riders
Bluetooth Version: 5.2
Range up to 500 meters
Duration: 12 hours with background music - 8 hours of conversation
Waterproof IP65
Voice commands
Vespa 50/90/125/150/200 PX-Special
Front spare wheel support jerry can holder (Hunersdorff "fuel friend") -MRP- for Vespa Smallframe, Largeframe 10 inch
Vespa Smallframe, Largeframe 10 inch
Vespa 50 PK V5X1T (D)
Vespa 50 PKS Elestart V5X2T (D)
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa PK 80 S Automatic VA81T
Vespa PK 80 S V8XST
Vespa 100 PK XL V9X2T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa PK 125 S Automatic VAM1T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 PK Automatic VVM2T
Note--> Complete with bearings
30X40 cm
Embossed image
Metal sign with Vespa motif 300x400 mm - Iconic Vespa since 1946 blue/white
Vespa 50/80/90/125/150/180/200
total length (without thread) 280 mm
reflective diameter: 125 mm
Mounting bracket
Vespa 50/80/90/125/150/180/200
total length (without thread) 280 mm
reflective diameter: 125 mm
Mounting bracket
Reinforced straight teeth primary transmission pair Z 29x68 "360 PG" for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary gear 29/68 straight teeth, composed of 360 Project Garage steel shock absorbers, nitrided and balanced steel clutch basket, gear crown machined to accommodate BLU SHOCK springs by 360 PG. Prepared and assembled by 360PG
Primary reinforced straight-tooth transmission gear Z 27x69 "360 PG" for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary gear 27/69 straight teeth, composed of 360 Project Garage shock absorber in solid steel, nitrided and balanced steel clutch basket, gear ring gear machined to accommodate BLU SHOCK springs by 360 PG. Prepared and assembled by 360PG
Reinforced straight teeth primary transmission gear Z 24x72 "360 PG" for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Primary gear 24/72 straight teeth, composed of 360 Project Garage shock absorber in solid steel, nitrided and balanced steel clutch basket, gear crown machined to accommodate BLU SHOCK springs by 360 PG. Prepared and assembled by 360PG
Reinforced blue shock absorber spring kit -360 PG- for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Kit of 4 reinforced shock absorber springs Blue-shock, 360 PG. Designed to be installed on all commercial bell housings equipped with shock absorber seats.
CNC quick throttle handlebar tube Vespa 50 Special, 50 L, N, R
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera ET3
Vespa 125 PK
Vespa 125/150/200 PE
CNC Vespa 50 Special, 50 L, N, R handlebar stem rapid throttle modification 360 PG in solid aluminum. The stem body has been designed so as not to make structural changes to the handlebar during installation, the stem has two fixing points, one at the extreme part of the handlebar body, underneath the tube support clamp, and one inside the handlebar (headlight area). The front brake cable passage is the same as the original tube.
Pair of spacers for fixing electronic ignition control unit / coil L 22 mm hole 6 mm "360 PG"
Pair of gear selector shoes "360 PG" for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/Primavera/ET3
Vespa 50-125 PK/S/XL/XL2
Kit 2 Reinforced Smallframe gear selector shoes 360 Project Garage. Made of high-performance mechanical steel, revised in tolerance dimensions and sizes. Surface hardening heat treatment designed for greater durability over time, usage stress minimized, tested in competitions and sporty touring use.
Aluminum bushing for adapting VHSH 30 carburetor on enlarged manifolds, external diameter 44.5 mm 360 PG for Vespa 50/125 GT/GTR/TS-150 Sprint/S.Veloce/GL-160 GS/180 SS/Rally-200 Rally-Special-N-L-R-Primavera-PK
Aluminum bushing for VHSH 30 carburetor adaptation on enlarged manifolds, external diameter 44.5 mm 360 PG
No structural modifications to the carburetor are required, it is simply mounted by heating the bushing with a hairdryer and inserting it by hand.
Central stand risers L 28mm "360 PROJECT GARAGE" for Vespa 50/125 GT/GTR/TS-150 Sprint/S.Veloce/GL-160 GS/180 SS/Rally-200 Rally-Special-N-L-R-Primavera-PK
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Indispensable during the conversion of Smallframe Vespas from 9" to 10" wheels. They represent the ideal solution even when replacing the original fork with models derived from scooters (e.g. Zip SP, ET2, ET4, etc.).
Brown brake pedal protection for Vespa 50 R 2°/S 3°/Special V5B3T 2°/90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa 50 V5A1T 914748 >
Vespa 50 Special V5B3T 230536 >
Vespa 90 V9A1T 184927 >
Vespa 125 Primavera VMA2T 0192145 >
Vespa 125 Primavera ET3 VMB1T 52721 >
Vespa 90 V9B1T 5363 >
Vespa PX
Vespa PE
Vespa PK
50x38x24 mm
chestnut brown RAL 8015
Graduated measuring cup 2%, 2.5% and 3% Malossi with cap (250 gr.)
250 ml oil dosing bottle with cap.
Extremely easy to use thanks to the practical graduated scale with double numbering.
3 different graduation columns that allow mixing at 2%, 2.5%, and 3%.
Made of high-quality, durable material that makes it reusable over time.
Thanks to its small size, you can easily transport it.
Vespa 50/90/125/150/200
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera ET3
Vespa 125 PK
Vespa 125/150/200 PE
In Galvanized Steel
l=301 mm
Ø 22/24 mm
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera ET3
Vespa 125 PK
Vespa 125/150/200 PE
In Galvanized Steel
HÜNERSDORFF FuelFriend PLUS 1-liter rigid plastic gasoline canister red
All models
Color: black
Vespa 50/90/125/150/160/180/200
KOSO signal filter for reliable RPM detection directly on the HT cable — universally applicable and ideal in cases of inaccurate RPM readings.
If the RPM signal is inaccurate, the KOSO RPM signal filter can help.
Improved signal at the tachometer input
Universal application
Sometimes, an electronic tachometer may have difficulty displaying the RPM accurately. If the signal is detected directly from the HT cable, the cause may be a "distorted" pulse. The voltage peaks generated by each ignition pulse are not then detected or counted with sufficient precision by the tachometer.
The KOSO signal filter helps to filter the individual ignition pulses more cleanly, thus allowing for a more reliable display of the RPM.
Connection to the SIP speedometer/tachometer
Red = positive 12 V DC
Green = Ground
Brown = brown wire of the SIP tachometer
Place the clamp on the HT cable and set it to 1 pulse in the adjustment menu.
Technical details
Operating voltage: 12 V
Silent Block muffler 30x30mm (1pc) M8 mount Vespa 50/90/125 Primavera ET3-PK
Silent Block exhaust 20x30mm (1pc) M8 mount Vespa 50/90/125 Primavera ET3-PK
Evok M6 Maximum Jet Kit (10pcs) for Dell'orto type carburetors (50/52/55/58/60/62/65/68/70/72)
Vespa 50/90/125/150/200
Black Steel License Plate Frame 180X180 mm for all plates since 1999
All models branded since 1999 / All models branded since 1999
In Metal
Dimensions: 180x180 mm