Classic Vespa
Vespa 180 SS VSC1T
Marked SIEM
contemporary reproductions of ancient images
Original TAMENI crankshaft for Vespa 160 GS 2° VSBM 0036098-
Vespa 160 GS 2° VSBM 0036098->/180 SS
Direct injection
stroke: 60.0mm
connecting rod: 110.0mm
piston pin Ø 16mm
External high voltage coil DUCATI for Vespa 125 PV ET3/PK50-125/N/HP/XL2/Automatic/200 Rally 2°/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Primavera ET3 VMB1T
Vespa 125/150/200 PX/PE
Vespa 200 Rally VSE1T 0033997>
Ape 50
Vespa 50/125 PK FL/HP/N
For installations without needles
External high tension Piaggio coil for Vespa PK50/S/XL/Rush-Bravo/SI/Ciao
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush V5X4T
Vespa 50 PK N V5X5T
Ape 50 TM
For systems without needles
MADE IN ITALY
DRT Z 23 helical gear clutch group (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS-VBB-GL-Sprint-PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm
Vespa 50 N/L/RV5A1T
Vespa 50 Special V5A2T>V5A3T
Vespa 50 Special V5B1T
Vespa 50 Elestart V5B2T
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2T
Vespa 50 PK XL V5X3T
Vespa 90 V9A1T
Vespa 90 SS V9SS1T
Vespa 90 Racer V9SS2T
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
Kit composed of:
- 2 Michelin S83 Tires 3.00/10
- 2 RMS Rims 3.00/10
- 2 Inner Tubes 3.00/10
Spring pair for two-seater saddle for Vespa PX/T5/V50/PV/ET3/PK50-125S/Automatic/ETS
Vespa 50 Vespa 90 Vespa 125 Vespa 150 Vespa 180 Vespa 200
Conical shape, rough
Vespa 125/150 PX
Vespa 125/150 Super
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Chromed, with Aluminum silencer
Replacement weights for extractor 07-FQ-055-IR flywheel side bearing 25X38X15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
D. 29 mm
Vespa 125 PX VNX1>2T (Adaptable-Adaptable)
Vespa 150 PX VLX1T
Transfers: 3
Diameter: 57.6 mm
PHBE Ø 36 AS carburetor with elastic attachment for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Voltage regulator budget version 12V/20A for Vespa PK50-125/S/SS/XL/XL2/ETS/PX80-150/PE/PX200E/Lusso/T5
Vespa 50 PK SS
Vespa 125 PX
Vespa 125 PX E
Vespa 125 T5
Vespa 125 PK
Vespa 150 PX E
Vespa 150 PX
Vespa 200 PX E
3 Large Faston Connectors
Economy Version
Gray kickstart lever protection for Vespa 125 VNB3-6T-TS/150 VBA-Super/160 GS/180 SS/Rally
Vespa 125 VNB3T > 6T
Vespa 125 PX VNX1>2T
Vespa 125 TS VNL3T
Vespa 125 GT VNL1>2T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
All models / Tutti i modelli
High-performance gearbox lubricant specifically designed for the Vespa world, its formula protects the gears from wear by reducing drag due to viscosity, while ensuring precise and silent gear changes. Also tested on all types of clutches with excellent results.
Package of 0.250 L
Pair of "SPORT" brake and clutch levers for Vespa 125/150/200 PX with disc brake
Vespa PX Arcobaleno disc brake
Chromated, CNC machined
Tapered roller fork bearing set for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/ 150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
4-parts
incl. dust cover washer
Vespa PK125 N/XL2
Ø 20 mm
engine connection: 27 mm
air filter connection: 62mm
main jet 76
secondary jet 50
Pair of side frame reinforcements for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Plates to weld to the frame
This plate will make your frame more rigid.
For a direct change of direction when entering a curve.
Engine Block Fusion Buffer (Rear Shock Absorber Mount) for Vespa 160/180 GS-SS
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Attention--> Assembly with the use of a press and conical tool for introducing the spare part is provided until stock runs out.
Inner frame reinforcement left side for Vespa 50/90/125 N-L-R-Special-Primavera
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa PK XL Rush
Brand: NEWFREN
Circle wheel Fa Italy 2.75X9 for Vespa 50 R 752189->/Special/V5A2T/V5A3T
Vespa 50 R V5A1T 752189>
Vespa 50 Special V5A2T>3T
Aluminum
M8 nuts and grover washers
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Kit composed of: engine housing, complete reed valve pack, studs, silent block.
Made by die-casting, it has significant improvements compared to the original:
-Enlarged flywheel side bearing
-Material reinforcements at the transfer ports
-Enlarged intake valve
Polini head gasket 208/210/221 cc thickness 0.25 mm for Vespa 200 PX/PE/Rally/Cosa
Vespa 200 PX/PE/Rally/Cosa
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Vespa 80 PX
Vespa PX125E VNX2T
Vespa PX150E VLX1T 345649>
Vespa P150X VLX1T>3000
Vespa PX200E VSX1T 14088>
Vespa 200 Rally 33997>
Pair of rear LED EVOK indicators for Vespa PK50-125 XL/RUSH/XL2/N/FL/HP
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK N FL1 from 1989
Vespa PK 50 N Speedmatic (FL1) from 1989
Vespa 50 PK (FL 2) from 1990
Vespa 50 PK XL Rush
Vespa 125 PK XL
Pair of rear LED arrows 12 Volt. Plug & play product. Only the chips are provided, original lenses required. Product not approved, for track use only.
Vespa PX disc brake from 2000
The pads with sintered friction material have the highest coefficient of friction and therefore ensure shorter stopping distances with breathtaking decelerations. Their peculiarity is the ability to maintain consistent performance regardless of temperature and weather conditions.
Dimensions--> 48.8x35.3x6.9 mm
For installation on the original caliper, it is necessary to trim the pads laterally.
PHBH Ø 30 B elastic mount carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Malossi gasket kit for thermal unit d.68.5mm (210 cc) for Vespa 200 PX-PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Bore: 68.5 mm
Stroke: 57 mm
Long thread spark plug
Power range: 23>30 hp
7 transfers
MHR Version: The MHR version differs from the SPORT one not only in the exhaust port, but also in the decidedly racing transfer diagrams.
Rubber intake manifold for PHBH 26 B carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Malossi power exhaust black sound muffler for Vespa 125/150 PX-LML
Vespa 125/150 PX
LML 125/150
Malossi power exhaust has been redesigned, increasing the power compared to previous models by about 5%, thanks to an in-depth study that involved the internal surfaces of the sheet metal with which the expansion is made.
Painted in black
Pair of fluorescent yellow grips with Malossi MHR YELLOW logo for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The new Malossi MHR grips aim for a trio of elements: design-safety-comfort.
Every detail has been designed and defined according to these three essential elements for an aggressive design, secure grip, and comfort while riding.
In particular, the design promotes vibration absorption, the dimensions make the grip secure and manageable, and the ergonomic structure allows the palm to rest without inflaming the forearm.
The Malossi MHR FLUO grips are made from a particularly soft PVC, the result of extensive research aimed at selecting special polymers with high elasticity, whose soft touch conveys a sense of pleasure and comfort to the user. This PVC lends itself to the most sophisticated colors and possesses excellent degrees of brightness. The aesthetic result of the MHR FLUO grips is extremely attractive and combines with high durability characteristics.
Pair of fluorescent orange grips with Malossi MHR ORANGE logo for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The new Malossi MHR grips aim for a trio of elements: design-safety-comfort.
Every detail has been designed and defined according to these three elements, essential for an aggressive design, grip safety, and comfort during riding.
In particular, the design favors vibration absorption, the dimensions make the grip secure and manageable, and the ergonomic structure allows the palm to rest without inflaming the forearm.
The Malossi MHR FLUO grips are made from a particularly soft PVC, the result of extensive research aimed at selecting special polymers with high elasticity, whose soft touch provides a pleasant and comfortable sensation to the user. This PVC lends itself to the most sophisticated colorations and possesses excellent degrees of gloss. The aesthetic appeal of the MHR FLUO grips is extremely captivating and is combined with high durability characteristics.
Reed valve manifold to the PHBH 30 crankcase for Vespa 125/150 VNB-GT-GTR-TS-Sprint-Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
RED FILTER E9 air filter with Ø 51 for SHA 12 / 10 - 12 / 12 - 13 / 13 carburetors
for carburetors SHA 12 / 10 - 12 / 12 - 13 / 13
Ø filter thread: 51mm
Vespa 50/90/125/150/200
- High-quality material
- Weather-resistant, UV-resistant, and ozone-resistant
- Reinforced internal flange to support the hand and neutralize vibrations
- Smooth outer surface to ensure greater safety
- The UP marking on the outer part (side grip) allows you to identify the orientation for correct assembly - Anatomical shape and structure, 30 mm diameter
In each package, you will find a complimentary folder of MINI Malossi stickers!