Classic Vespa
VMC engine oil breather for Vespa V50/PV/ET3/PK/S/XL/XL2/FL/VNA-PX/T5/Cosa
All models / Tutti i modelli
VMC Oil Breather for Vespa Large and Small Frame Crankcase
An essential option for those who mount Vespa large frame clutches like the VMC 10 Springs and clutches based on the Piaggio 8 springs model type "cosa2"
The VMC breather extended upwards allows more engine oil to be inserted into the engine crankcase than specified in the Piaggio manuals, avoiding premature wear of the clutch components
Steel screw with black anti-corrosion treatment
Hexagon for fastening with 10mm wrenches
Leakage locking system in aluminum at the top of the tube.
Vespa 50 PK XL
Vespa 125 PK XL
Vespa 50 PK N V5X5T
Color: Gray
LML badge for handlebar cover for LML Star 125-200 4T/Star/125-150 4S
LML Star 125-200 4T/Star/125-150 4S
Socket: ba20d
SIP 76° side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
chrome
with 2 springs, self-folding
SIP 76° red stem side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
red
with 2 springs, self-folding
Side stand SIP 82° with black stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=245 mm
aluminum
black
with 2 springs, self-folding
SIP side stand 82° with red stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=245 mm
aluminum
red
with 2 springs, self-folding
SIP 76° side stand with chrome stem for Vespa 50/125 PK-S-L-FL-HP/ PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX (all)
Vespa PE (all)
Vespa PK (all)
l=205 mm
aluminum
chrome
with 2 springs, self-folding
Vespa 50/125 PK HP-FL/FL2
Inner cable diameter: 1.2 mm
Sheath seat diameter: 5.5 mm
Cable length: 1550 mm
Sheath length: 1490 mm
All models / Tutti i modelli
Polini Evo ignition fan for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE
Vespa PX
Vespa PE
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 2.4 Kg
Chrome full wheel Made in Italy for Vespa 98/125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Included: M8 Nuts (11 mm wrench) and washers Finish: Chrome
Size: 3.50/8
Vespa 50 PK/S/XL/N/HP/FL
Vespa 125 PK/S/XL/N/HP/FL
Vespa 125/150/200 PX/T5
Dimensions: 4.2x17mm rounded head
Pinasco aluminum thermal group (160 cc) for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Notes-->5 decantings
All models
Graft Hole: 5 mm
Chromed Cuppini Perimeter with Blue Pattern for Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/180 SS/Rally
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Complete with footrest bracket
Low voltage socket for Vespa 80/125/150/150/200 PX-PE without electric start
Vespa 80/125/150/150/200 PX-PE without electric start
Right hood hook lever for Vespa 125/150 V1-V30>V33-U-VM-VN-VB-VL
Vespa 125/150 V1-V30>V33-U-VM-VN-VB-VL
Rear wheel drum FA Italia for Vespa 125 V1-33T/VM/VN/VNA/VNB/150 VL/VB1/VBA/VBB
Vespa 125 VNB
Vespa 150- VBB
Internal diameter: 126 mm
Vespa 125 Primavera ET3
Two-seater, spring base, with lock and handle
Pair of black brake and clutch levers for Vespa 50 R 905289 ->/Special 146587 ->/90/125 PV 172802 ->/ET3 24055 ->
Vespa 50 V5A1T from frame 905289
Vespa 50 Special V5B3T from frame 95878 to 96377
Vespa 50 Special V5B3T from frame 146857
Vespa 90 V9A1T from frame 160961
Vespa 125 Primavera VMA2T from frame 172802
Vespa 125 Primavera ET3 VMB1T from frame 24055
Lucid with large ball
Luminous body with reflector and gray roof for Vespa 50 Special 2°
Vespa 50 Special V5B3>4T
Gray-colored roof
Pair of luminous bodies (right and left) for Vespa 50/125 PK XL-N-Plurimatic-FL2-Rush
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK N FL1 from 1989
Vespa PK 50 N Speedmatic (FL1) from 1989
Vespa PK 50 FL2 from 1990
Vespa PK 50 Rush
Vespa 125 PK XL
Orange
Complete black seat with handle for Vespa 125 Primavera VMA2T
Vespa 125 Primavera VMA1T >VMA2T
Two-seater, spring base, with handle, without lock
Black "Comfort" complete seat for Vespa 125 GT/GTR/TS-150 Sprint/S.Veloce-180 SS
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 SS VSC1T
Two-seater, sheet metal base with foam, with handle, without lock
Very comfortable and similar to the original version.
M10x1.25 mm front shock absorber nut upper for Vespa 50/125 PK/S/XL/N/HP/PX/T5/ET2/ET4/LX/LXV/S/GT/GTL/GTV/GTS-Ape 50
Vespa PK/S/XL/XL2 Automatic/PX/T5/ET2/ET4/LX/LXV/S/GT/GTL/GTV/GTS
oil tank sleeve for Vespa PX/T5
17mm wrench
steel, galvanized
DRT full circle crankshaft (86 mm) stroke 53 cone 20 rod 105 for Vespa 125 ETS
Vespa 125 ETS VMS1T
Airbox Purifier Cover Polini for Vespa 180-200 Rally/P80 -150X/P200E/PX80-200E/Lusso /`98/MY/`11/T5 (with mixer)
Vespa 150 PX VLX1T
Vespa 200 Rally VSE1T Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The airbox for the original carburetor casing. Even the largest carburetor
is useless if it cannot draw enough air into a PX engine. The airboxes for the SI carburetor casings provide a remedy
here, as their significantly larger volume provides the engine with a
good 20% more air compared to the original carburetor casing cover. The engine responds much better, especially at
low revs.' of volume, suitable for models WITH mixer
Vespa 180/200 Rally-PX
In aramid
for models with mixer
Spare wheel holder for Vespa 50 Special V5B1-3/SS/90 Racer/100 2°/SS/125 Primavera/ET3/125 GT/GTR/TS/150 VGLA-B/GS VS5/GL/Sprint/V
Vespa 50 Special V5B1>4T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
197 mm
For 10-inch wheel
Painted grey
Base gasket and fixing screws included
SIP Road 2.0 racing exhaust for Vespa 125 VNA/VNB/GT 1°/GTR 1°/Super/150 VBA/VBB/VGLA/B/GL/Sprint 1°/V 1°/Super 1°/
Vespa 125 GT 1°/GTR 1°/Super/150 VGLA/B/GL/Sprint 1°/V 1°/Super 1°/
Exhaust type: Muffler
Engine type: 80-150cc, Largeframe
suitable for wide tire
large mount
Vespa 125 GT
Vespa 125 GTR VNL2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Finishing treatment like the era
With IGM 3884S
Left footrest platform Made in Italy for Vespa V30-33/VM/VN/VNA-TS/150 VL/VB/VBA/GS VS1-5/160 GS/180 SS/Rally/PX/T5
All vintage models / Tutti i modelli vintage
Chromed
Screws and internal bag reinforcement plate
Footrest bracket m16 GP racing parts in Black for Piaggio Ciao/SI/Bravo
Piaggio Ciao/SI/Bravo
The aluminum bar, of high strength, due to its 16mm diameter, provides a stable base for the knurled footpegs, a design that ensures excellent grip and super effective non-slip for both shoes and asphalt and off-road boots.
The footpegs are mounted directly onto the bar and secured using a nut-against-nut system, with the insertion of a washer that prevents loosening. To ensure further security, it is advisable to apply a minimal amount of threadlocker on both sides. The assembly requires only two wrenches: one 22 mm and one 20 mm.
Once properly secured, the footrests will remain stable and safe, requiring very little maintenance.
The knurled footrests are available in five colors:
-timeless aluminum color
-black, elegant and timeless
-gold, for a touch of luxury
-red, bold and gritty
-blue, lively and modern
Complete white seat with Italian flag for Vespa 50/125 Special-ET3-Primavera
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Two-seater, spring base, with handle
Black plastic license plate holder for Vespa 50 N/L/R-Special-PK
Scooter-Vespa 50 cc new plates from 2004
In Plastic
BGM PRO Siluro Exhaust - Sport painted in Black for Vespa 125 Primavera-Primavera ET3
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
It also fits Vespa V50, 50N, 50 Special, V90, SS90, 90 Racer, V100 models converted to 125cc (or larger).
The BGM Pro Banana in the SPORT version offers a discreet look with the
performance values of a racing exhaust.
It resonates from around 5000 revolutions per minute and then pushes forward with great emphasis.
Currently, it is the strongest exhaust system available in the characteristic banana-shaped design of the standard Vespa ET3 models.
Original look top performance like a resonance exhaust
Wide speed range
More top speed
Very discreet
Fits without modifications to Vespa PV125, ET3
Handmade in Europe
The BGM Sport Banana harmonizes very well with a powerful street tuning
based, for example, on the Polini 133 cylinder. The relatively low split manifold
allows, like an original banana exhaust, a
quick disassembly of the exhaust body. The connection is secured by
traction springs that are stable but can be quickly detached.
It is recommended to increase the jetting number
Vespa 50 Special V5A2T
Vespa 50 Special V5A3T
With mounting plates