Classic Vespa
Vespa 50 PK N/FL2
Plastic knob
Complete tap for Vespa PK50S Lusso/SS/XL/FL/HP/N/Rush/XL2/80S Lusso/125ETS/N/XL/XL2
Vespa 50 PK
Vespa 50 PK S
Vespa 125 PK
Including rod and gasket
Vespa 125 V32T 228597>
Vespa 125 V33T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 125 U VU1T
Vespa 150 VB1T
Vespa 150 VL1T>VL3T
Vespa 150 GS VS1T>VS5T
BGM Pro thickness of 1 mm between head and cylinder for Vespa 125 PX/TS/GTR/Super/GT/Cosa
Vespa 125 PX/TS/GTR/Super/GT/Cosa
Vespa 50 Special, L, N, R
LED conversion kit for Vespa 50 Special, L, N, R, consisting of:
12v DC voltage regulator;
LED position lights;
LED high beam bulb.
The product is perfectly compatible with both the original 6V point ignition and the 12V electronic ignition, and does not require structural modifications to the headlights.
Installation is carried out using the original wiring, and requires fully reversible modifications, fully described in the instruction manual provided with the kit.
Battery not required
Complete piston 125cc from diameter 52.5 to diameter 56.4 mm (an L-shaped ring) for Vespa PX125 E/Lusso/'98/MY
Vespa 125 PX VNX1>2T
By clicking on purchase, all available sizes will be displayed
Length-->70mm
Pin-->15x44x10mm
Compression-->35
An L-shaped ring
Carburetor gasket kit for Vespa 125 V1>15T-V30>33T-VM1>2T-VN1>2T-/150 VL1>2T
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>2T
For carburetors TA17/A,B,TA18C/D/E,TA19C
3 Pcs.
Vespa 125 Primavera ET3 VMB1T
CULT VANS Waffle Grips Ø 24/24 mm in black color for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
For handlebar tube Ø 24/24 mm
Length--> 125 mm
CULT VANS Waffle Grips Ø 24/24 mm in grey color for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
For handlebar tube Ø 24/24 mm
Length--> 125 mm
Dexter Racing "Sport Production" expansion exhaust for Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa PK
Expansion exhaust designed for Vespa Smallframe engines, developed to offer sporty power delivery, excellent performance increase, and a full and aggressive sound, while maintaining good torque at low revs.
Technical specifications
Compatible with cylinders with exhaust pitch 52 mm / 56 mm
Internal collector diameter: 32 mm
Compatible with 3.50 R10 tires
Requires short fourth gear to make the most of the usage range
Frame compatibility
Vespa 50 Special
Vespa 50 N / L / R
Vespa ET3
Vespa Primavera (also with glove box)
Also compatible with:
Vespa PK
Vespa HP
Vespa FL2
Vespa ETS
On PK, HP, FL2, and ETS models, removal of the frame panel is necessary.
Performance
This expansion has been developed to ensure:
Excellent push at high revs
Good torque at low revs without overly
Dexter Racing "Summer" expansion exhaust for Vespa 50/90/125 New VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 50/90/125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa PK
Expansion exhaust designed for Vespa Smallframe engines, developed to offer sporty power delivery, excellent performance increase, and a full and aggressive sound, while maintaining good low-end torque.
Technical features
Compatible with cylinders with exhaust center distance 52 mm / 56 mm
Inner diameter of the manifold: 32 mm
Compatible with tires 3.50 R10
Requires short fourth gear to make the most of the usage range
Frame compatibility
Vespa 50 Special
Vespa 50 N / L / R
Vespa ET3
Vespa Primavera (also with glove box)
Also compatible with:
Vespa PK
Vespa HP
Vespa FL2
Vespa ETS
On PK, HP, FL2, and ETS models, removal of the frame partition is necessary.
Performance
This expansion was developed to ensure:
Excellent thrust at high revs
Good low-end torque without significantly compromising road
Dexter pan exhaust (32 mm outlet) for Vespa 50 N/L/R-Special/ 90-125 Primavera ET3
Vespa 50 Special V5B3T
Adaptable/Adaptable
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Marmitta Padellino Dexter Racing 3.0 by W1R – Vespa Smallframe
Main Features
New version updated 3.0 developed in collaboration with W1R
Manifold with 32 mm internal diameter
Reduced noise compared to a classic Proma
Original “padellino” look
Excellent torque at low and mid-range
Allows optimal use of the 4th gear
Plug & play installation without modifications
Compatibility
Vespa 50 Special
Vespa 50 R
Vespa 50 L
Vespa 50 N
Configurations stroke 43 and stroke 51
The new version 3.0 is also compatible with:
Vespa 125 Primavera with side glovebox
For correct installation, you can use:
3.00-10
90/90-10
Dexter expansion exhaust for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
With E13 homologation mark
Expansion exhaust (60 mm center distance) for Piaggio Ape 50 All models
Ape 50
Thermal groups with 60/62mm center distance type Parmakit, Falc Rotax
Dexter expansion exhaust (Thermal groups 115CC-130CC) for Piaggio Ape 50 All models
Ape 50
Exhaust for cylinders with 52/56mm center distance
Manifold internal diameter 32mm
Great for both 100/115cc cylinders and 130/144, both aluminum and cast iron
Excellent performance from low revs and good extension beyond 10000 rpm
Dexter Modern Box Muffler (28 mm exhaust) for Vespa PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified PK / HP Padellino – Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
✅ Technical Features
-Available with an inner diameter collector of 28 mm or 32 mm
-Noise lower than a Proma
-Original-like aesthetics (modern padellino style)
-Great torque to make the most of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with 3.00 R10 and 90/90 R10 tires
-Slightly shorter collector compared to the Classic Box to avoid interference with the partition (can be further shortened if necessary)
-
Lamellar intake manifold DEXTER racing for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
For carburetor PHBH 28/30/VHS 24-30/TMX 27/30/PWK 28/30
passage: 30mm
carburetor connection: 34mm
DEXTER racing intake manifold with valve for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
For carburetor PHBH 28/30/VHS 24-30/TMX 27/30/PWK 28/30
passage: 30mm
improved inclination to keep the carburetor as flat as possible
Silent-block engine crossbar Dexter racing, stainless steel/polyurethane for original Piaggio Vespa engine casings V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Silent-block engine crossbar Dexter racing (soft) in aluminum/polyurethane, for original Piaggio engine casings for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
-rubber pads with calibrated hardness of your choice
-4 shims for load calibration during assembly
-threaded aluminum tubes for very easy assembly
DEXTER racing exhaust for Vespa 125 GT/GTR/TS/150 GL/Sprint/V/PX80-150/PE/Lusso/Cosa 1
Vespa 125 GT/GTR/TS/150 GL/Sprint/V/PX80-150/PE/Lusso/Cosa 1
-exhaust for Vespa PX with 177/190 cylinders both cast iron and aluminum
-excellent performance from low revs
-fits with center stand and spare wheel
Ape 50
Vespa 125 V30T> 33T
Vespa 125 VM1T> 2T
Vespa 125 VNB1T 032100>
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 150 VL1T> 3T
Vespa 150 VB1T> 61420
Vespa 150 VBA1T 81257>
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T -
Vespa 150 GL VLA1T
Vespa 150 GS VS1>5T
Vespa 180 SS VSC1T
Measurements: 26x34
Material: rubber or cork
Aluminum footboard kit in Black color for Vespa 50/90/125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Base gasket for speedometer in grey color for Vespa 125 GT/150 Sprint-GL-VBA-VBB/160 GS/180SS
Vespa 125 GT VNL2T, Vespa 150 Sprint VLB1T, Vespa 150 VBA1T, Vespa 150 VBB1T > VBB2T, Vespa 150 GL VGLA1T, Vespa 150 GL VGLB1T, Vespa 150 GS Vespa 160 GS
In rubber, color grey
Polini HT FOR RACE Z 22 clutch gear for primary Z64 straight teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Polini Redesigned Engine Casings for Vespa PX
The Polini engine casings for Vespa PX represent a completely redesigned solution, available in two dedicated versions: PX 125/150 and PX 200 E. A product that combines technical innovation and construction precision, designed to offer high performance without sacrificing full compatibility with original components.
Total Compatibility
The casings are designed to be perfectly compatible with all original Vespa components, allowing for simple and immediate installation.
Technical Features
-Advanced Fuel System
-The transition from the traditional rotary valve system to a modern flat reed valve pack offers numerous advantages:
-Elimination of carburetion issues related to valve sealing
-Better delivery and performance increase
-Possibility to mount racing reed packs with 28/30 mm carburetors
-A racing cusp reed pack (without mixer) is also available, with a dedicated manifold for 28/30 mm carburetors.
Advanced Technical Details
-Mounting system designed to prevent the clutch side oil seal from coming
POLINI lamellar pack for Polini monolamellar manifold Vespa 50-125/PV/ET3/PK/XL/XL2
For Polini lamellar manifold
for Vespa 50-125/PV/ET3/PK/XL/XL2
58x50x48 mm
Engine gasket kit for Vespa 125 GTR/TS/PX-150 Sprint V/PX
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce 294260>
Vespa 150 Super VBC1T 412374>
Vespa 80 PX V8X1T
Vespa 125 PX VNX1>2T
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 PX VLX1T
Complete stator with electronic flywheel VMC for Vespa LARGE FRAME PX125-200/ P200E/ RALLY 2°/ COSA/ LML/ LUSSO
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Stage 6 F1 Carbon Look Glossy Rearview Mirror (SX) for Vespa 50/90/125/150/180/200
Vespa 50/80/90/125/150/180/200
Threading M8x20
Front and Rear Shock Absorber Kit hi-tech "Carbon look" LIMITED EDITION for Vespa 50/90/125 Special-L-R-Primavera
Vespa 50 V5A1T N,L,R
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Complete with lower support, upper support, fixing bolt, hub cover
The Carbon look series shock absorbers are a limited edition created to celebrate the 40th anniversary of CARBONE, with 200 pieces available for the Italian market (exclusively from RDV and a few others in Italy)
Front and Rear Shock Absorber Kit hi-tech "Carbon look" LIMITED EDITION for Vespa 125/150/200 PX PE
Vespa PX 125
Vespa PX 150
Vespa PX 200
Vespa PE 200
Vespa Rainbow
Complete with lower support, upper support, fixing bolt
The Carbon look series shock absorbers are a limited edition created to celebrate the 40th anniversary of CARBONE, with 200 pieces available for the Italian market (exclusively from RDV and a few others in Italy)
Vespa 160 GS VSB1T
Two-seater, spring base, with button and continental eagle tag, 100% made in Italy.
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 57 mm connecting rod 110
Attention--> Compatible with thermal groups in stroke 57.
Crankshaft oil seal with square notch flywheel side CORTECO 20x40x6 mm for Vespa 125 VNA2 2°/VNB/GT/GTR 1°/Super/TS 1°/150 VBA 2°/VBB/VGLA/B/GL/Super 1°/Sprint/V 1°
Vespa 125/150
Starter gear spring for Vespa 98/125/150 V1>15T/V30>33T/VM/VN/VL/VB
Vespa 98, Vespa 125 V1T > V15T, Vespa 125 VN1T> VN2T, Vespa 125 VM1T > VM2T, Vespa 125 V30T > V33T, Vespa 150 VL1T > VL3T, Vespa 150 GS VS1T > VS3T
EVOK primary transmission gear z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Made in Italy
Chrome tubular Shield Edge (Accessory) for Vespa 125 GT/GTR/Sprint/Super
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Fastening with screws