BGM
BGM PRO crankshaft bearing and oil seal kit FKM/Viton® (E10/ethanol resistant) for Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
WIDE FRAME ENGINE ISSUE: The BGM Pro and Corteco oil seals, of much higher quality, are available (for safety reasons) only with a 0.8 mm sheet metal coating. If installed in a wide frame engine, the crankshaft bearings deform, causing damage to the bearings.
WIDE FRAME ENGINE SOLUTIONS: The circumferential bead of the oil seal is flattened, reducing the height of the oil seal plate by approximately 0.3 mm. The bearings then move freely. b) The BGM Pro bearing set with special FAG 9-ball bearings. In this case, the bearing shoulders have been precisely machined to ensure stress-free mounting of the crankshaft bearing. The set includes high-quality, durable BGM Pro FKM/Viton® oil seals.
Complete thermal group BGM PRO 177/187 cc (also for Elestart/electric start) side spark plug for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
The BGM PRO 177cc is an improved and more powerful version of the proven BGM177 cylinder for Vespa PX125/150, now also compatible with models equipped with electric start.
Everyday Performance
The BGM177 cylinder is designed to offer high performance, durability, and reliability for daily use. By replacing the original cylinder, it is possible to double the power of the standard 125cc engine, with generous torque that allows for smooth riding. The cylinder can also be configured to reach over 20 HP, provided it is paired with the right carburetor, exhaust, and crankshaft. It is therefore an ideal solution for beginners who want to expand performance in the future.
With a displacement of 177cc, the BGM PRO 177 cylinder ensures a safe and relaxed riding experience, maintaining the same reliability and durability as a 200cc engine, operating in the same RPM range as a standard engine. It also offers low fuel consumption and good range. It is compatible with standard components, requiring only a small adjustment of the carburetor jet and spark plug.
Main Features
Material:
Mounting and dismounting tool cross -BGM PRO- for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The BGM PRO ball crimping tool is an intelligently designed tool. It can be used to easily and conveniently install the gear balls with the spring in the main shaft of Vespa Smallframe engines.
Easy disassembly/assembly of gear balls
The gear balls are held firmly in place
The main shaft is held by the tool - both hands free to mount the gear lever
100% made in Germany
Without this tool, assembling the gear claw is a real game of patience. How do you position and sufficiently preload the balls on both sides at the same time without the gear spring shooting them into the infinite expanse of the workshop? It's not uncommon for the balls to simply disappear and you need new ones, of course exactly on a weekend...
With the BGM PRO tool, the job is done in no time. The whole process is so enjoyable that you want to do it over and over again. Simply because it is so nice... Indispensable in every Vespa workshop.
BGM Pro RACING full circle crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm
Stroke 51 rod 97
flywheel side bearing: 25mm
flywheel side oil seal: 24mm
flywheels:
87mm flywheel side
86mm pinion side
cases to be bored
Trolley extension for motorcycle mover (rear wheel) -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
Vespa Smallframe, largeframe, wideframe
Brilliant extension for maneuvering assistance by BGM PRO for all classic
Vespa and Lambretta scooters. With the addition for the rear wheel, the
vehicle can be turned on the spot. This way, the scooter can be stored
well and safely even in the smallest corner and can be easily removed
again. All this without any effort.
Complete silent block with steel tube for Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Silent block--> 35x30x14mm
Tube--> 44x15x9.3mm
Oversized BGM clutch cover for Vespa 125 125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE /Lusso/Cosa/T5
Vespa VNA-TS/150 VBA-Super/Rally/PX80-200/PE-Lusso/Cosa/T5
Intake manifold BGM PRO Ø24mm compatible with Dellorto PHBL24/25, Polini CP23/24- Vespa Wideframe 125cc Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
BGM Pro Touring Exhaust for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
The new BGM Pro Touring muffler is a real wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the unobtrusive design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust right from low revs.
Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.
Stroke: 57 mm
Connecting rod length: 110 mm
Piston pin: Ø15 mm
Connecting rod bearing: needle bearing (upper and lower)
One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.
The balance factor has been improved, among other things, thanks to a hollow crank pin.
The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155
Cylinder -BGM PRO 150 cc, wide frame, Faro Basso, Ø=57mm, stroke=57mm- Vespa 1953-1959, VM, VN, ACMA (from engine V55), VB1T, VGL1T, VL1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
BGM PRO cylinder with 150cc and 57 mm stroke suitable for all 2-channel engines. The grey cast iron cylinder has three transfer ports and is suitable for all wide frame engines with a 57 mm stroke. The cylinder with a 57 mm crankshaft also fits 125 cc engines with a 54 mm stroke without any issues. The third port of the cylinder is sealed with an aluminum spacer for the foot gasket, supplied, and the cylinder is evacuated via a corresponding cut in the piston. This means that no modifications to the engine housing are necessary.
Displacement: 150 cc
Stroke: 57 mm
Piston: Ø = 57 mm
Piston rings: 2 x 1.5 mm
Cylinder material: Cast iron
Cylinder head: CNC machined from solid aluminum with additional cooling fins at the bottom
Ports: 3
Spark plug: short thread (e.g., NGK B8HS, Bosch W3AC)
Ignition timing: 18-19°
The cylinder gives very old Vespas significantly more pulling power and top speed. Rapid acceleration, even by today's standards, is the specialty of the BGM PRO 150
Clutch z20 (67/68) - BGM PRO Superstrong 2.0 Touring CR Ultralube - Cosa2 Coating (14mm aluminum/sintered) - 20 teeth for primary wheel 67/68T - Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125
Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125
Touring CR aluminum/sintered Unlike the STD type, the Touring CR uses an ultra-modern pad type with sintered material, as is also common in the motorcycle sector. The coating support is made of high-strength aluminum with reinforced discs (width 14 mm) and an extra-wide clutch lining. The wide lining ensures smooth clutch engagement behavior and the large friction surface is extremely durable. The doubling of the material on the discs, which engage in the clutch basket, is designed for extremely high mileage. Thanks to the large contact surface, the basket and linings remain in perfect condition in the long term. Ideal for powerful engines that have to face long journeys.
BGM rubber sleeve (d. 35-40) for Vespa 50/90/125/150/200 Special-N-L-R-PK-PX-Sprint-GL-TS
Rear shock absorber BGM Pro SC/R1 Sport for Vespa 125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Vespa PX Arcobaleno
With the Sport and Competition lines, BGM Pro offers two series of high-quality shock absorbers within its range. Both are distinguished by impeccable workmanship, high-quality materials used, and ABE approval. Despite the high load capacity, the shock absorbers are extremely light due to the high-strength CNC-machined aluminum construction, with an excellent hard anodized finish that ensures superior surface protection.
The front shock absorbers are 15 mm shorter than standard ones, allowing for a lowering of the front end. This brings benefits in terms of driving stability, top speed, and even aesthetics. Furthermore, the reduction of the swing arm angle improves the shock absorber's response, while the resulting increase in caster makes driving more stable at high speeds.
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Gas oleo-pneumatic, compression and extension can be adjusted separately through 12 millimetric adjustments. The spring preload is precisely adjustable, body made of very strong light alloy, spring and anodized canister in dark gray color.
Height--> 330 mm
Complete BGM Pro SC Competition Shock Absorber in Silver for Vespa 125 VM1
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3,PK;PX,PE
The BGM PRO SC Competition front shock absorber is an evolution of the successful BGM PRO F16 Sport series. Externally, the Competition series is distinguished by the external reservoir. It has a modified base adjustment and is therefore very suitable when used with stiff sport springs. The compression/rebound adjustment prevents diving or rapid extension on rough roads. Thanks to these features, the shock absorber is an excellent replacement
even for more powerful vehicles. The wide adjustability clearly allows the shock absorber to be used with standard springs as well, ensuring maximum comfort during driving.
Vespa 50 V5A1T N/L/R 92877>
Vespa 50 S V5SA1T 111891>
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 25001>
Vespa 125 Primavera VMA1T>VMA2T
Vespa 125 Primavera ET3 144679>
Vespa 50/125 PK S/XL/N/HP
QUALITY FROM EUROPE Precisely manufactured by
a specialized company in Europe. The high-quality base material
14NiCrMo13 was originally developed for the
aerospace sector. Hardened at Thyssenkrupp, it has a surface hardness of
58-60HRC.
PURPOSE The BGM drive shaft
PRO meets the needs of highly tuned engines. It has been
designed as a heavy-duty replacement for the original
Piaggio main shaft. The dimensions match 1:1 with the original. This
means that all transmission components, including those from
other manufacturers, are compatible. It can be used on both standard
engines and heavily reworked engines with high torque at the
wheel.
FIT Fits all smallframe
engines with manual transmission. The only exceptions are the first series engines of the
V5A1T models (small side flap, years of
construction 1963-1966). The main shaft corresponds to the latest
construction state of the PK models. Therefore, it has a wheel nut with
M16
only for BGM PRO Soft Stop System
Front shock absorber - BGM PRO SC/F1 SPORT, 240mm for Vespa 125/150/200 PX-PE-T5
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
With the Sport and Competition line, BGM Pro has two series of high-quality shock absorbers in its product range. Both share perfect craftsmanship, high-quality materials, and ABE approval. Despite the high load capacity, the shock absorbers are very lightweight, as they are CNC machined from high-strength aluminum and feature an exceptional hard anodized surface protection. The front shock absorbers are 15 mm shorter than standard shock absorbers, thus lowering the front of the vehicle. This benefits driving stability, top speed, and, not least, the aesthetic appearance. Additionally, the swing arm angle is reduced, improving the shock absorber's response behavior. The resulting increase in caster stabilizes handling at high speeds.
with KBA / ABE control mark (TÜV/Dekra approval required)
high-strength CNC machined aluminum
Hard anodized surfaces for optimal protection
sporty and harmonious damping technology
high-quality components for long durability
solid 12.5 mm piston rod
Complete ready-to-install solution
BGM PRO SC Competition Gas racing suspensions with excellent everyday quality. Fully adjustable in spring preload (continuously variable) and rebound (12/16 stages). With a separate expansion reservoir for
Clutch -BGM Pro Superstrong 2.0 CR80 Ultralube CNC WITHOUT sprocket for Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
The Superstrong 2.0 CR joint combines extreme durability, absolute reliability, and ease of use. It is the foundation of every solid engine tuning.
The solid CNC-machined clutch basket has excellent
concentricity and enormous torsional rigidity. It thus offers perfect
clutch engagement with a well-defined bite point and a clean cut. It is suitable for both the touring rider who appreciates high quality
and the ambitious racer looking for an extremely robust and
stable clutch. ULTRALUBE The latest generation Superstrong 2.0 CR clutches are now equipped with a new innovative technology: Ultralube. Ultralube
delivers (through precisely defined holes and centrifugal force)
gear oil both into the high-load hub profile (between the
clutch basket and the clutch hub) and into the clutch linings themselves. This technology, unique in the Vespa sector,
makes the legendary Superstrong 2.0 CR clutch even more stable than
it already is. A clutch designed for eternity. PERFORMANCE
The clutch supplied ready for installation is adjusted for a
power range up to approx. 20PS / 22Nm through
BGM Sport 350 Tire 3.50 10 TL 59S 180 km/h (reinforced) for Vespa 125/150/160/180/200 GT/GTR/TS/PX/Rally/SS-Ape 50
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Size: 3.50/10
ONLY for tubeless rims
BGM PRO clutch puller for Vespa 125 GTR/Super/TS/PX-150 Sprint V/PX-200 Rally-PE
Vespa 125 GTR 142113 >
Vespa 125 TS 8159 >
Vespa 150 Super 356829 >
Vespa 150 Sprint Veloce 254591 >
Vespa 200 Rally 29499 >
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Clutch disc kit incl. steel discs -BGM PRO Superstrong Racing Red Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 4 discs
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the most high-performing on the market. The heavy-duty organic compound of the lining has been created for the high pressures and high temperatures of racing. The high-quality pad material is thinner than a conventional cork pad. This allows for the insertion of an additional friction disc in the entire Racing Red pad package.
BGM clutch disc kit including steel discs for Vespa 50/90/125 Primavera ET3-PK-S-XL-Ape 50
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
3 Pc Set
+ interdiscs
Black BGM suspension spring for Vespa 125/150/180/200 Super-GT-GTR-TS-Super-Sprint-Sprint Veloce-Rally
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T (Adaptable)
Vespa 200 Rally VSE1T (Adaptable)
Clutch basket gear DRT Z25-62 straight teeth for Vespa PX200 E Lusso '95->/'98/MY/Cosa 2 200
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T 1995>
Ø 42 mm
helical 22 teeth
for the primary 65 teeth
clutch: Ø 115mm
Clutch basket gear DRT Z23-62 straight teeth for Vespa PX200 E Lusso '95->/'98/MY/Cosa 2 200
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T 1995>
Ø 42 mm
helical 22 teeth
for the primary 65 teeth
clutch: Ø 115mm
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Gas oleopneumatic, compression and extension can be adjusted separately through 12 millimetric adjustments. The spring preload is precisely adjustable, body made of very resistant light alloy, spring and reservoir anodized in dark gray color.
Height --> 330 mm
Complete oil seal kit -BGM PRO, FKM/Viton® (E10 resistant) cone 20 for Vespa 50/125 PK-XL-N-HP-FL
Vespa 50/125 PK
Ape 50
WHY FKM The FKM material (fluorocarbon rubber) is extremely resistant to heat, friction, and fuel/ethanol. In Germany, the current super fuel already contains up to 5% ethanol. In other countries, the ethanol/alcohol content is even higher. Conventional sealing rings may swell or soften when in contact with ethanol-containing fuels. However, BGM PRO FKM oil seals offer perfect protection. Moreover, FKM is twice as resistant to temperatures compared to conventional NBR oil seals (blue), has excellent gas impermeability, and is also highly resistant to aging.
WHAT IT IS SUITABLE FOR An engine equipped with BGM PRO FKM oil seals can therefore operate smoothly even with E10 fuel (10% alcohol). The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high revs. BGM PRO FKM oil seals are therefore suitable for all engines, whether they are original engines or high-performance tuned engines.
BGM PRO ADVANTAGES The BGM PRO oil seals offer the additional feature of double sealing. All oil seals that seal to the atmosphere have a so-called dust
BGM Classic Tire 3.50/8 46P 150 km/h for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
3.50/8
Black
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50 PK/S/XL
Gas oleo-pneumatic, spring preload adjustment via ring nut, black body and spring
Vespa Wideframe 98/125/150cc V98, V1T-15T, V30T-33T, Hoffmann HA/HB, VM,VN, VL, VB, VGL, VD, GS150, Piaggio APE A1T-15T, AB1T-4T, AC
Special tool BGM pro for the rear wheel bearing nut of all Vespa Wideframe models.
Thanks to its intelligent design, this tool can be used for both hole sizes (Ø37+43mm). It offers the possibility to preload the tool on the nut to be loosened. Thanks to the identical thread pitch of the tool and the nut, the preload is fully maintained during loosening, making slipping impossible.
Complete Oil Seal Kit - BGM PRO, FKM/Viton® (resistant to E10) Ø 30 for Vespa 80/125/150/200 PX-PE-Rainbow-Elestart
Vespa PX 80 E V8X1T 3000001> 3000996
Vespa PX 125 E VNX2T 87954>
Vespa 125 PX E Arcobaleno VNX2T>280358
Vespa 125 PX E Arcobaleno Elestart VNX2T> 280358
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 Cosa VNR1T
Vespa PX 150 E VLX1T 455340>
Vespa PX 150 E Arcobaleno VLX1T >711687
Vespa PX 150 E Arcobaleno Elestart VLX1T >711687
Vespa 150 Cosa VLR1T
Vespa P 200 E VSX1T 153348>
Vespa PX 200 E VSX1T 153348>
Vespa PX 200 E Arcobal
WHY FKM The FKM material (fluorocarbon rubber) is extremely resistant to heat, friction, and fuel/ethanol. In Germany, the current super fuel already contains up to 5% ethanol. In other countries, the ethanol/alcohol content is even higher. Conventional sealing rings can swell or soften when in contact with ethanol-containing fuels. The BGM PRO FKM oil seals, on the other hand, offer perfect protection. Additionally, FKM is twice as resistant to temperatures compared to conventional NBR oil seals (blue), has excellent gas impermeability, and is also highly resistant to aging.
SUITABLE FOR An engine equipped with BGM PRO FKM oil seals can therefore operate without issues even with E10 fuel (10% alcohol). The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high speeds. The BGM PRO FKM oil seals are therefore suitable for all engines, whether they are original engines or high-performance tuned engines.
BGM PRO ADVANTAGES The BGM PRO oil seals offer the additional feature of double sealing. All oil seals that seal to the atmosphere have a so-called
Oil seal kit for engines Ø 27 -BGM PRO, FKM (E10/ethanol-resistant) rubber, brown for Vespa 125/150/200 PX-TS-GTR-Sprint Veloce
Vespa PX 80 E V8X1T >100000
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139 >
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >87953
Vespa 150 Super 412374 >
Vespa 150 PX VLX1T >455339
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 200 RALLY 0033997 >
Vespa 200 PE >153347
Rear hub oil seal: 27
Vespa 50/90/125/150/160/180/200
Pair of BGM Pro silent blocks engine crossbar - MEDIUM - for Vespa PX200/Rally 200 (VSE1T) (2nd series)
Vespa 125 PX T5 VNX5T
Vespa PX rainbow series
Vespa 200 Rally 0040654 >
Vespa 200 PE VSX1T
Reinforced silent blocks for greater driving stability, mount dry (at most using talcum powder to help).
ATTENTION--> Directional silent blocks, they must be mounted according to the direction of travel in the following way: Left direction of travel: red mark, right direction of travel: green mark.
Front shock absorber buffer kit BGM PRO (2 Pcs) for Vespa 80/125/150/200 PX-PE
Vespa PX (all)
Vespa PE (all)
Vespa 50 PK XL Rush
Vespa 125 PK
BGM PRO silent tires in polyurethane. Much narrower than the original tires, they minimize self-movement. The damping thus works more defined and precise. The vehicle appears much narrower, the shutters respond faster.
The set contains the two tires for the front axle shock absorber. The
tires are located on the shock absorber and are mounted both above and below
the screwed metal fixing plate of the front fork. They replace the standard silent tires 1:1 without further modifications.
ASSEMBLY
The larger rubber is first pushed onto the upper end
of the shock absorber. The smaller rubber is located on the top
of the mounting plate. The large washer is then placed above the support plate and secured with a serrated washer and a nut. Torque for the upper nut 30-40 Nm.
Just swap the rubber with the original ones, ready.
BGM Pro base gasket thickness 1.5 mm 178 Malossi for Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001>)
Vespa PX125/PX150/Cosa125/Cosa150/GTR125/TS/Sprint Veloce (VLB1T 0150001-)
Nut and washer clutch assembly BGM PRO for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1
Vespa 125 (all except Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
M12 x 1.50 collar Ø:18.6mm h:9mm
key opening:15
Carburetor -BGM PRO Faster Flow Dellorto/SPACO SI24/24E (Without mixer) for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
BGM FASTER FLOW SI Carburetor - optimized carburetor for high-performance engines
High-performance engines require reliable and consistent fuel supply. The BGM FASTER FLOW carburetor is designed to meet these needs, using the SI24/24E or SI26/26E Dell'Orto/Spaco models. Each unit is completely disassembled, tested, reworked, cleaned, and carefully reassembled in our factory, ensuring the highest quality for modified engines.
Main modifications:
Enlarged connection holes from the float chamber to the jets
Added a hole in the float needle area
Spring-loaded float needle for increased durability
These modifications significantly improve fuel supply, preventing shortages even with powerful exhausts. In particular, the spring-loaded float needle compensates for vibrations and increases durability, while the optimized supply is also an advantage for stock engines.
Advantages:
No jet blockage with powerful exhausts
Easy tuning even with over 20 HP
Quiet, powerful, and suitable for everyday use
Available for mixed or separate lubrication
Suitable for:
Engines with SI20/20D or 24/24E carburetors,