RDV Scootershop
RDV > Spare Parts and Accessories > Engine and parts > Oil seals and gaskets > Complete oil seal kit -BGM PRO, FKM/Viton® (E10 resistant) cone 20 for Vespa 50/125 PK-XL-N-HP-FL
Complete oil seal kit -BGM PRO, FKM/Viton® (E10 resistant) cone 20 for Vespa 50/125 PK-XL-N-HP-FL
Available
07-CL-127-IR

Complete oil seal kit -BGM PRO, FKM/Viton® (E10 resistant) cone 20 for Vespa 50/125 PK-XL-N-HP-FL

The oil seal is a very important element when we talk about engine seals. For optimal performance, the seal on the crankshaft must be perfect, achieved thanks to a spring inside the oil seal lip. Over time, it loses elasticity and wears out, causing the engine to suck in air and compromising its operation (irregular RPMs, lack of idle stability). It is recommended to replace them with high-end products in Viton, PTFE, Corteco, Ariete, Rolf, Malossi to ensure good performance and keep you away from problems. RDV TIP: ALWAYS check that the seal on the shaft is optimal, even by simply testing it by hand before positioning it. If not, also check the crankshaft.
technical specifications


WHY FKM The FKM material (fluorocarbon rubber) is extremely resistant to heat, friction, and fuel/ethanol. In Germany, the current super fuel already contains up to 5% ethanol. In other countries, the ethanol/alcohol content is even higher. Conventional sealing rings may swell or soften when in contact with ethanol-containing fuels. However, BGM PRO FKM oil seals offer perfect protection. Moreover, FKM is twice as resistant to temperatures compared to conventional NBR oil seals (blue), has excellent gas impermeability, and is also highly resistant to aging.

WHAT IT IS SUITABLE FOR An engine equipped with BGM PRO FKM oil seals can therefore operate smoothly even with E10 fuel (10% alcohol). The high-quality brown FKM®* sealing material is permanently resistant to alcohol and is also suitable for engines with high temperature loads and high revs. BGM PRO FKM oil seals are therefore suitable for all engines, whether they are original engines or high-performance tuned engines.

BGM PRO ADVANTAGES The BGM PRO oil seals offer the additional feature of double sealing. All oil seals that seal to the atmosphere have a so-called dust

Shipping time:

24/48 hours

1 point RDV = 2 cents 28 points RDV = 0,56 € cashback
28,90 €
23,69 € VAT excluded
Compatibility

Vespa 50/125 PK
Ape 50

Request information

Do you have any questions? Request more information from the staff

I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required

Related articles

Mazzuchelli crankshaft for Vespa PK50/​S/​SS/​XL/​XL2/​FL/​HP/​N/​Rush-Ape 50
Available
Compatibility

Vespa 50 PK XL
Vespa 50 PK N

technical specifications

rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12

Approfondisci
Shipping time
24/48 hours
105,90 €
86,80 € VAT excluded
1 point RDV = 2 cents 105 points RDV = 2,10 € cashback
-25% Crankshaft Pinasco Anticipated (20 mm cone)
low availability
low availability
07-AA-027-PI
07-AA-027-PI

Crankshaft Pinasco Anticipated (20 mm cone)

Compatibility

Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK S/XL

technical specifications

Cone 20 mm / Cone 20 mm

Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure the highest quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.

Approfondisci
162,14 € 216,18 €
132,90 € VAT excluded
1 point RDV = 2 cents 162 points RDV = 3,24 € cashback
-25% Crankshaft Pinasco Anticipated (19 mm cone) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T

Vespa 50 PK (1st series)

technical specifications

Cone 19 mm / Cone 19 mm

Made of forged steel, CNC machined. The shaft is produced with numerous heat treatments that ensure maximum quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.

Approfondisci
Shipping time
24/48 hours
148,41 € 197,88 €
121,65 € VAT excluded
1 point RDV = 2 cents 148 points RDV = 2,96 € cashback
-25% Pinasco Anticipated Crankshaft (20 mm cone) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
low availability
Compatibility

Vespa 50 PK XL V5X3T

Vespa 50 PK N

Vespa 50 PK HP

technical specifications

Cone 20 mm / Cone 20 mm

Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure the highest quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.

Approfondisci
148,41 € 197,88 €
121,65 € VAT excluded
1 point RDV = 2 cents 148 points RDV = 2,96 € cashback
-25% Pinasco Anticipated Crankshaft (20 mm cone and 45 mm stroke)
Not available
Compatibility

Vespa 50 PK XL V5X3T

Vespa 50 PK N

Vespa 50 PK HP

technical specifications

Cone 20 mm

Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure maximum quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.

Approfondisci
187,12 € 249,49 €
153,38 € VAT excluded
1 point RDV = 2 cents 187 points RDV = 3,74 € cashback
-20% Polini For Race crankshaft (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Available
Compatibility

Vespa 50 PK XL /N/HP
Ape 50

technical specifications

Stroke 43 mm

Approfondisci
Shipping time
24/48 hours
187,39 € 234,24 €
153,60 € VAT excluded
1 point RDV = 2 cents 187 points RDV = 3,74 € cashback
-25% Jasil crankshaft with advanced timing (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Available
Compatibility

Vespa 50 PK XL /N/HP
Ape 50

technical specifications

rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12

Approfondisci
Shipping time
24/48 hours
112,63 € 150,17 €
92,32 € VAT excluded
1 point RDV = 2 cents 112 points RDV = 2,24 € cashback
-5% VMC crankshaft stroke 43, cone 20, rod 87 cnc for Vespa 50 PK XL/N/HP/FL
Not available
Compatibility

Vespa 50 PK XL /N/HP
Ape 50

technical specifications

stroke 43, cone 20, rod 87 cnc

VMC ROTARY VALVE crankshaft, stroke 43, cone 20, rod 87 cnc, for Vespa smallframe

Also perfect when mounted with reed valve intake to the crankcase.

Made in Italy with the best materials and treatments, it weighs over 1.5kg

No need to bore the crankcases, the shoulders are 82mm and 86.5mm

It is recommended to use rollers cages wider than the original Piaggio ones.

WARNING:

THE CRANKSHAFT DOES NOT HAVE THE LATERAL LIP ON THE VALVE SHOULDER LIKE THE ORIGINAL CRANKSHAFTS

THEREFORE ON SOME CRANKCASES THE VALVE MAY NOT SEAL.

THE CRANKSHAFT CAN BE MOUNTED ON REED VALVE INTAKES TO THE CRANKCASE

Ideal for VMC 100 RVA

Approfondisci
Shipping time
24/48 hours
290,00 € 304,63 €
237,70 € VAT excluded
1 point RDV = 2 cents 290 points RDV = 5,80 € cashback
-25% Jasil crankshaft original version (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Available
Compatibility

Vespa 50 PK XL /N/HP
Ape 50

technical specifications

rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12

Approfondisci
Shipping time
24/48 hours
112,90 € 150,53 €
92,54 € VAT excluded
1 point RDV = 2 cents 112 points RDV = 2,24 € cashback
Mazzuchelli advanced crankshaft for Vespa PK50/S/SS/XL/XL2/FL/HP/N/Rush-Ape 50
low availability
Compatibility

Vespa 50 PK XL
Vespa 50 PK N

technical specifications

rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12

Approfondisci
146,99 €
120,48 € VAT excluded
1 point RDV = 2 cents 146 points RDV = 2,92 € cashback
Mazzuchelli crankshaft (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Available
Compatibility

Vespa 50 PK XL /N/HP
Ape 50

technical specifications

Stroke 43 mm

Approfondisci
Shipping time
24/48 hours
115,90 €
95,00 € VAT excluded
1 point RDV = 2 cents 115 points RDV = 2,30 € cashback