Engine Parts Yes, Ciao and Bravo Piaggio
The engine is the soul of your Si, Ciao or Bravo by Piaggio. In this section, you will find the complete catalog of spare parts dedicated to the heart of your moped, perfect for both a faithful restoration and a true tuning. Whether you're looking for a gasket kit for simple maintenance or a Malossi or Polini thermal unit to unleash new performance, you're in the right place. Explore our wide selection of crankshafts, cylinders, carburetors, exhausts, and all the necessary internal components. We select only the best brands to ensure maximum reliability and performance for your engine.
Malossi thermal group base+CVF Ø43 65cc in cast iron pin Ø12 for Piaggio Bravo-Boxer-SI
Yes-Bravo-Boxer
Have fun without complications
(6 transfers - 2-segment piston)
Malossi cast iron thermal units, the first and simplest step to modify your moped's engine, are the optimal choice to continue using a standard or approved exhaust system.
Piaggio Ciao, Yes, Bravo
Pre-tempered carbon steel springs with high yield strength,
protected by a coating in various colors with high thermal resistance.
The different coloring highlights the load of each series of springs.
Variator contrast spring yellow (OUTER Ø 53.50X115 MM - WIRE Ø 3.7 MM - K 3.8) for Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao, Bravo, SI
M10x14
Orig.Ref 031150
Piaggio Ciao
SPARK PLUG BOOSTING
SAFE IGNITION WITH HALF A PEDAL TURN
INSTALL REAR DEDICATED BRAKE LIGHT
OPTIMAL CARBURETION THANKS TO PERFECT COMBUSTION
Coil 02 windings double output:
01 headlight winding
01 coil boosting winding POWER SUPPLY L.T.
Hole spacing 50mm
Piaggio Ciao/SI/BRAVO/BOXER
Pivot wheel axle for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot tree rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox that does not require any modification.
Pivot shaft 119.6mm with Ø 23 fitting for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot shaft rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox without requiring any modification.
Malossi technicians have worked to increase the rigidity and robustness of the shaft itself.
Ideal pairing: Malossi gears, for exaggerated performance!
Note: For maximum operational precision, the gear wheel is mounted with a slight interference on the wheel shaft.
Technical data
Shaft diameter: Ø 23.
Total length: 119.6 mm.
Material: special trilayer steel made to our specifications, case-hardened and tempered.
Manufactured on high-precision machine tools.
Individually checked to ensure exact operational clearance.
Completely ground.
Low voltage socket for light system Piaggio CIAO-BRAVO-BOXER-SI' (models with contact points)
HELLO-BRAVO-BOXER-YES (dotted models)
Gruppo trasmissione completo over range per Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Gruppo trasmissione completo over range
Quando il motore Big Deps e il carter motore Malossi spingono forte, la trasmissione deve stare al passo. Ecco perché è nato l’Over Range Malossi, un sistema completo progettato per supportare prestazioni costantemente in aumento.
Puleggia più grande, controllo totale
Il cuore di questo kit è la nuova puleggia fissa del correttore di coppia Fixed Pulley, con un diametro maggiorato rispetto all’originale che aumenta l’escursione del rapporto di trasmissione.
Risultato? Accelerazione più efficace e prestazioni sempre al top, perché il variatore lavora meglio e sfrutta tutta la potenza disponibile.
E non ci siamo fermati qui. Per garantire resistenza e durata, la puleggia è stata realizzata con materiali speciali e trattata con un processo termochimico particolare, che ne aumenta tantissimo la resistenza all’usura e la resistenza meccanica: in pratica, la rende quasi indistruttibile. Questa puleggia fissa funziona perfettamente accoppiata al correttore di coppia Torque Driver Malossi, che ha il suo stesso diametro.
MULTIVAR MHR 3.0
Un Multivar MHR completa il sistema, con piste per i rulli progettate per un’efficienza massima, molla di contrasto per una risposta più pronta, mozzo – più lungo – per accoppiarsi con una cinghia più potente e ottimizzare i rapporti.
Il Multivar MHR è l’evoluzione delle precedenti generazioni del prodotto e porta nel tuo motore tutta l’esperienza Malossi, acquisita sui circuiti di gara e dalla tecnologia Cad-Cam, per garantirti risultati tecnici ai massimi livelli.
E per sfruttare appieno il range del gruppo correttore di coppia e le potenze oggi sviluppate dai mezzi da competizione, abbiamo progettato una cinghia dentellata Malossi Special Belt (venduta separatamente). Ha una sezione maggiorata e la lunghezza è aggiornata per assicurarti il massimo rendimento in tutte le condizioni di utilizzo.

Attenzione: dopo il montaggio dell’Over Range Malossi non sarà più possibile avviare veicolo a pedale, ti consigliamo di usare il nostro kit avviamento a strappo art. 5019908 (da acquistare separatamente).
Il kit è composta da:
Variatore Multivar MHRPerché adottare il Multivar MHR? Beh, perché in Malossi abbiamo completamente riprogettato questo variatore, a partire dalle piste di scorrimento dei rulli, dal mozzo più lungo e fino alla molla di contrasto.
Torque DriverEcco perché ora è possibile riuscire ad alloggiare un vero correttore di coppia con doppie piste di scorrimento per personalizzare a piacimento la curva di cambiata!
Gruppo puleggia composto da puleggia fissa e mobile con Ø maggiorato da 100 a 110 mm
Puleggia fissa e mobile saldata in un unico pezzo, con boccola appositamente trattata in superficie
Fly ClutchFrizione Ø 107 mm, riprogettata con nuove masse per adattarsi al senso di rotazione inverso rispetto a quello presente nel panorama scooter. L’accoppiamento a molle Malossi consente il funzionamento a un punto di attacco RPM ottimale predefinito. Disponibili come optional 2 serie molle per poter personalizzare il tuo veicolo.
Wing Clutch BellCampana frizione rinforzata con un anello di raffreddamento alettato, perfettamente abbinabile alla frizione Fly Clutch ad alte prestazioni di nuova concezione. Questo è l’unico componente comune allo scooter.
Albero ingranaggio primario
Ci siamo spinti fino alla modifica dell’albero ingranaggio primario per alloggiare un gruppo pulegge e frizione/campana che deriva dal mondo scooter.Diventato l’elemento di connessione tra i componenti di nuova progettazione, questo albero è stato rinforzato con un aumento del Ø del gambo a 13.5 e per essere predisposto ad un eventuale supporto esterno viene fornito con dado, paraolio e guscio a rulli utili per il montaggio.
Special Belt (venduta separatamente)Cinghia a sezione maggiorata, aumentata del 23% (da 13 a 16 mm)
Il gruppo di trasmissione completo Over Range è compatibile con:
PIAGGIO BOSS 50 2T: art. 6118940
PIAGGIO BRAVO 50 2T: art. 6119260
PIAGGIO CIAO PX 50 2T: art. 6119261
PIAGGIO SI 50 2T: art. 6118940

Attenzione: da abbinare esclusivamente alla cinghia Malossi.Attenzione: per poter montare l’albero ingranaggio primario incluso nel kit è necessario aver montato gli ingranaggi primari Malossi art. 6719286 o 67 7021 (6718630 - produzione cessata).
Il variatore Pinasco Overdrive per ciclomotore è stato studiato per garantire prestazioni elevatissime, perfetta intercambiabilità ai componenti originali e affidabilità sono caratteristiche che hanno reso il marchio Pinasco famoso nel mondo. La maggiore escursione complessiva consente l’inserimento di un rapporto più corto in accelerazione ed uno più lungo in velocità massima con ovvi vantaggi in termini di resa complessiva
Ingranaggi primari Malossi HTQ a rapporto corto (13:1) per Piaggio Ciao-Si-Bravo con variatore
Si-Ciao-Bravo con variatore
Questi ingranaggi nascono usufruendo della ventennale esperienza della
Malossi nella progettazione e realizzazione di ingranaggi. I nuovi
ingranaggi H.t.q. sono stati studiati e realizzati con denti dritti /
elicoidali per ridurre al minimo le perdite per attrito e le
sollecitazioni sui supporti. Inoltre i nostri ingranaggi ottimizzano la
rapportatura permettendo di sfruttare tutta la potenza erogata dal vostro
mezzo garantendovi un notevole allungo rispetto la condizione originale.
Gruppo termico Malossi base+CVF Ø43 65cc in ghisa spinotto Ø12 per Piaggio Ciao/Ciao PX
Piaggio Ciao/Ciao PX
(6 travasi - pistone a 2 segmenti)
In questi gruppi termici la caratteristica di elevata durabilità della ghisa si unisce agli standard di qualità quasi maniacali di Malossi, una delle pochissime aziende ad esigere il massimo anche da questa classe di gruppi termici.
In quest’ottica si inseriscono le rigidissime selezioni per l’accoppiamento tra cilindro e pistone rigorosamente mantenuto all’interno della fascia dei 20 micron massimi di tolleranza.
Piaggio Si
Verniciata trasparente, con silenziatore anodizzato nero.
Piaggio Ciao, Bravo, SI
Dimensioni: 15x35x11 SKF6202
Molla di contrasto variatore bianca 73x96 mm - Ø filo 6 mm - k 14,1 per Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao, Bravo, SI
For models WITH VARIATOR
Ref. Orig 1786975
Pinasco 2.0 street variator hub for Piaggio Ciao PX with variator
Piaggio Ciao PX with variator
Pinasco has developed a new variator hub for Piaggio mopeds featuring cutting-edge technical solutions that solve the reliability issues of traditional hubs.
Immediately noticeable are:
- the internal reinforcement ribs that stiffen the hub casing,
- the brake shoe guide with its tab for spring attachment is no longer riveted but screwed to the casing, this solution facilitates maintenance and possible repairs.
- the 360° rotatable oil release valve from hydraulic derivation.
- external reinforcements in the bearing area
- the roller cages are mounted in special steel bushings that increase the stress distribution surface.
- alternatively, Pinasco has also made the model with ball bearings that can be converted with steel bushings into the roller cage model.
The new Pinasco hub has been tested during the Monferraglie and "Monfareis" races with excellent results.
The roller cage model is recommended for OFFROAD use and the ball bearing model for ROAD use.
The kit includes bearings, oil seals, and gaskets as shown in the photo.
Applications: Boxer, Bravo, Ciao, Si, Grillo, CBA, ECO.
Piaggio Ciao, Boxer, Yes, Bravo
Piaggio bravo
Clutch spring kit (3pcs) for Piaggio Si/Ciao/Bravo
Piaggio Yes/Hello/Bravo
Wire 1.2mm
Spiral 7.9mm
Orig.Ref 221600
Piaggio Si/Ciao/Bravo
Wire 0.64mm
Spiral 6.8mm
Ref.Orig 121537
46X43 slave engine casing with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve-side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional) and additional CNC-machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm, and comes with the dedicated crankshaft and all mounting accessories.
46X46 slave engine casing with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Crankcase for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional) and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all assembly accessories.
Engine slave casing 43X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Block for Piaggio Moped has been designed to accommodate a crankshaft with the valve side shoulder 5mm wider than the original, with a stroke of 43mm and 46mm, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Master engine crankcase 46X43 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Carter Motor Pinasco Power Casing for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, stroke of 43mm and 46mm, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfer ports. The kit is available in 2 distinct versions, Valve and Reed, for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all accessories for installation.
Primary Malossi HTQ long ratio gears (9:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
These gears are born from the twenty-year experience of
Malossi in the design and production of gears. The new
H.t.q. gears have been studied and made with straight /
helical teeth to minimize friction losses and
stress on the supports. Moreover, our gears optimize the
gearing, allowing you to exploit all the power delivered by your
vehicle, ensuring a significant extension compared to the original condition.
Primary Pinasco short ratio gears (12.3:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new Pinasco SPRINT GEARS are extremely durable and quiet. The main pinion has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) ensuring the correct alignment of the half-pulleys even in the most demanding use.
The Pinasco SPRINT GEARS, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Primary gears Pinasco with medium ratio (10.8:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Bravo with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet. The main pinion has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) ensuring the correct alignment of the half-pulleys even under the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Primary gears Pinasco with long ratio (9.2:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet, the main gear has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) always ensuring the correct alignment of the pulleys even in the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Malossi MP-ONE reed valve engine casing for models with Ciao-SI-Bravo-Boxer electronics
Piaggio Ciao/Si/Bravo/Boxer
Pair of shot-blasted silicon aluminum alloy die-cast crankcases.
Integral Malossi project with reed valve intake, controlled by a large
4-petal valve.
They can be used with any thermal group, exhaust system, crankshaft, and
intake system.
The Malossi reed valve crankcases are perfectly interchangeable with the
original ones and are equipped with a special intake manifold for the
original carburetor or a SHA 13/13 carburetor.
A specific intake system has been created with a 19 mm carburetor and E12 type air filter, complete with all components for
installation.
Given the very limited insertion spaces in Piaggio frames, it was
necessary to create a super compact engine, and the great commitment of
our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, robustness,
simplicity, ease of installation, excellent operating result
without modifications (everything connects as in the original engine).
The large 4-petal composite fiber reed valve ensures a
Gear tree for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
rear wheel
Malossi MP-ONE reed valve engine casing for models with points ignition Ciao-SI-Bravo-Boxer
Piaggio Ciao/Si/Bravo/boxer
Pair of shot-blasted aluminum-silicon alloy die-cast crankcases.
Integral Malossi project with reed valve intake, controlled by a large
4-petal valve.
They can be used with any thermal unit, exhaust system, crankshaft, and fuel system.
The Malossi reed valve crankcases are perfectly interchangeable with the
original ones and are equipped with a special intake manifold for the
original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburetor and E12 type air filter, complete with all the components for mounting.
Given the very limited insertion spaces in Piaggio frames, it was
necessary to create a super compact engine, and the great effort of
our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, robustness,
simplicity, ease of assembly, excellent operating result
without modifications (everything connects like in the original engine).
The large 4-petal composite fiber reed valve ensures a
Piaggio Ciao/Si/Bravo/boxer
Primary Pinasco gears with medium ratio (10.4:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
After producing the Gear Box Variator for Piaggio mopeds, Pinasco has developed a series of high-strength steel gear kits with various gear ratios for all "Ciao" enthusiasts who use them in Enduro, Track, or Touring.
Made from alloy steel specific for gears, the new SPRINT GEARS Pinasco are extremely durable and quiet, the main pinion has a helical profile to eliminate the axial oscillation of the clutch shaft (a component of the forces at play "pulls" the shaft inward) always ensuring the correct alignment of the half pulleys even in the most demanding use.
The SPRINT GEARS Pinasco gears, complete with washers, can also be mounted in all original Piaggio variator wheel hubs.
Malossi Gear box rear hub for Piaggio Ciao/Si/Bravo/Boxer/Grillo with variator
Piaggio Ciao/Si/Bravo/Boxer/Grillo with variator
Complete with bearings, seals, and shims.
Piaggio Ciao, Bravo, SI
For freewheel release lever
Ref. Orig 103018
Fine thrust washer for rear wheel axle for Piaggio Ciao Bravo SI
Piaggio Ciao, Bravo, SI
Ref. Orig 131512
Brake washer nut sleeve freewheel chain for Piaggio Ciao - Boxer
Hello- Boxer
Fiber gasket rear wheel hub and fork oil cap for Piaggio Ciao SI
Piaggio Ciao, YES
Ref.Orig 397
Piaggio Ciao, Bravo, SI
MODELS WITH VARIATOR
Ref. Orig 175751