Vespa P 200 E VSX1T
Specifically designed for wire exchange
The brass pad does not mark the wire.
Gear selector prisoner m7x50 for Vespa 125-200 VNA-VBA-GT-TS-PX T5/Cosa
Vespa 125-200 VNA-VBA-GT-TS- PX T5/Cosa
Complete sport RDV Race one seat in black with black stitching for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE first series
The brand new " RDV race one " sport saddle is a perfect combination of sporty aesthetics (black stitching, sporty seat in harmony with the Vespa curves) and good comfort (metal base, 2.5 cm foam for the seat), innovative magnetic closure to ensure the best aesthetic result, entirely designed and conceived by our Staff, made with the technical support of the company Nisa SRL. 100% MADE IN ITALY
Note: For PX/PE models, it fits perfectly ONLY on tanks with a wing nut cap.
For PX/PE Arcobaleno models with a quick release cap, it can be installed by removing or lowering the central buffers provided (otherwise the central part touches before the rear part)
In the new model, the RDV logo is embossed on the rear.
Vespa PX PE T5
Primary couple with extended Malossi ratio (Z 24/63) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an evolventimeter.
The HTQ Malossi gears are made using exclusively materials that exceed the strict standards imposed by our technicians with rigorous tests and trials.
The final processing uses numerically controlled machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and strength.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Coupled in pairs to respect the correct operating clearance, the HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Original Piaggio Turn Signal Relay For Vespa 125/150/200 PX-PE New Model 2011-2012
Vespa PX
Vespa PE
Vespa PX Arcobaleno
Vespa Cosa
Vespa PK all types
6-12 VOLT, 10/21 WATT
2 Carbon Plates Kit MALOSSI 100x100mm (thickness 0.3mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
for VHSB/VHSC carburetor
Vespa 50/125 PK XL/N/HP
Vespa 80/125/150/200 PX
Compatible with all Vespa models EXCEPT for Vespa 160 GS
for VHSB/VHSC carburetor
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
Primary couple with extended DRT ratio (Z 24/62) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Luggage rack with backrest and handles, chrome for Vespa PX80-200/PE
Vespa PX
Vespa PE
With padded backrest and handles.
Fastening with tank bolts.
Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
BGM PRO Radial Brake Caliper with 4 Pistons - Made in Italy (TÜV Approved)
The renowned BGM Pro radial brake caliper with 4 pistons has been completely redesigned and improved. Produced entirely in Italy, this new version boasts an optimized bleeding system that makes maintenance operations faster and easier than before. Combining elegant design with maximum functionality, BGM Pro offers a caliper that guarantees braking power, safety, and durability over time.
The BGM Pro Sport caliper offers a braking surface superior by about 28% compared to standard two-piston calipers (typical of Vespa PX or LML Star). The technical advantages translate into:
✅ Greater braking power: More decisive deceleration and reduced stopping distances.
✅ Improved feel: Optimized hydraulic transmission ratio for precise modulation.
✅ Even wear: Pressure distributed over 4 points ensures uniform contact between pads and disc.
✅ Quick maintenance: Pad replacement facilitated by the two-ring fastening system.
Technical Compatibility
Mounting: Radial for supports with hole spacing of 82 mm.
Adaptability: Also compatible with supports from other brands (e
All Models / Tutti i modelli
Shield anchoring
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active while promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm length, 30cm width, 43cm handlebar height, and 32cm seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not stability or quality).
SIP BE2 emulsifier for SI 20.15-17 A-D/20.20-26.26E/G/H/27.23
Vespa 80/125/150/200
For carburetors type SI
FAR Vintage Classic Rearview Mirror – Left/Right Shield in Black Color
All Models
Anchoring to the shield
Vespa all models/All models
Service Station Manual for Vespa 50-125/PV/ET3125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally
Vespa 50/90/125/150/160/180/200
Front and Rear Shock Absorber Kit "Carbon Look" LIMITED EDITION for Vespa 125/150/200 PX PE
Vespa PX 125
Vespa PX 150
Vespa PX 200
Vespa PE 200
Vespa Arcobaleno
Complete with lower support, upper support, fixing bolt
The Carbon look series shock absorbers are a limited edition created to celebrate the 40th anniversary of CARBONE, with 200 pieces available for the Italian market (exclusively from RDV and a few others in Italy)
Cooling spray -WEICON- 400ml for quick installation of ball bearings
All models
Weicon COLD SPRAY, 400ml, ideal for quick installation of ball bearings.
WEICON Cold Spray is versatile and suitable for troubleshooting in the field of electronics and for repairs in the industrial sector.
Metal components such as ball bearings, bushings, chain links, shafts, etc. can be inserted into the tightest of fits with WEICON COLD SPRAY
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 T5 VNX5T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Kit for a Vespa, color Black
Vespa 50/90/125/150/200 PX-Special
Front brake and clutch protection bellows Vespa 125 VNA-TS/150 VBA-Rally/PX80-150X/PX80-200E/Lusso/'98/MY/'11/T5/LML Star 125-200 2T/4T
Vespa 80/125/150/200 PX T5
All models / Tutti i modelli
Buzzer
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. The thermoformed interiors, fully removable and washable, are equipped with a chin strap and removable neck collar with a zip, and in all graphic variants, embellished with brown eco-leather details with a vintage style. The PIX can be equipped with a long visor for greater wind protection or a contoured visor with modern lines, the interchangeable visors share the fastening system which in the graphic versions is made of metal. The helmet's features are completed by the micrometric buckle, the anti-theft ring, the strap holder elastic, and in the graphic variants, the rear goggle strap holder.
BGM CLASSIC stator wire restoration kit for Vespa 125/150/200 PX-PE without electric start
Vespa 125 PX VNX2T
Vespa 150 VLX1T
Vespa PX 200E VSX1T
Rainbow Series
Economical and high-quality BGM solution to renew an old ignition base plate.
Pre-assembled cable whips are provided to be resoldered to the existing alternator in place of the old defective cables.
The cables are equipped with expertly crimped connectors with heat shrink tubing insulation and stripped and pre-tinned ends for attachment to the base plate. Of course, the spark plug tube for cable protection is also included.
Prefabricated to fit Vespa ignition plates
Original cable colors
Incl. professionally insulated and mounted plug
Inexpensive
A soldering iron is required for assembly
Midnight blue complete seat for Vespa 80/125/150/200 PX-PE 1st series
Vespa PX 80
Vespa PX 125
Vespa PX 150
Vespa 200 PE
Two-seater, spring base, with lock and handle
100% MADE IN ITALY
Economy version
Vespa PX 80
Vespa PX 125
Vespa PX 150
Vespa 200 PE
Two-seater, spring base, with lock and handle
100% MADE IN ITALY
Economy Version
Intake bellows -MRP Dumbo Ø60mm (Keihin PWK 33-38mm, Mikuni TMX 35, Polini 32/34, Dellorto PHBH 28/30, VHSH 30)- Vespa PX, T5, Sprint, Rally, GT, GTR, GL150, Super, VNA, VNB, VBA, VBB
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Intelligent MRP solution to continue drawing cold air from the frame when using larger carburetors.
The opening in the frame has a size of approximately 60x44mm. The area is therefore equivalent to a carburetor with a cross-section greater than Ø50mm. Thus, the intake tube solution does not offer any performance loss even on very powerful engines. Thanks to the cooler intake air, better results can be expected under heavy load, which otherwise strongly heats the intake air under the side cover.
Another great advantage is that the frame can also be used as sound insulation. Engines that have been converted to diaphragm-controlled intake can drastically reduce the intake air noise level. For this purpose, the frame can be further lined from the inside with sound-absorbing material.
Pinasco SI 26/26 Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Pinasco SI 26/26 MIX Carburetor for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Cable grommet for hood lever in gray color for Vespa 125/150/VNB/VBB/GL/Sprint/Rally/PX 1°
Vespa 125/150/160/180/200 all from 1958
In grey rubber
Tool bag with tools Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - black
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Included:
- 6 ring spanners in sizes (7, 8, 9, 10, 11, and 13mm).
- A set of 10-piece ½" socket wrenches in sizes (10, 11, 13, 14, 17, 19, 21, 22, and 24mm)
- A set of 41-piece ¼" socket wrenches in sizes from 4mm to 14mm and bits for slotted, Phillips, hex, and TX wrenches
- Needle nose pliers
- Tube wrench
- Spark plug wrench
- 10 cable ties
- 10m insulating tape
- 100g of winding wire
- 11-piece Bowden cable repair kit
- Canvas tool bag with 5 compartments