Vespa P 200 E VSX1T
Crankshaft - BGM Pro Touring (rotary valve) stroke 60mm Vespa 200 Rally VSE1T 33997 -
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, so it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is also forged and then CNC machined. LUBRICATION
The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC rolling bearing and side thrust washers provide a solid bearing. The lubrication of the upper connecting rod bearing is done through two lubrication holes. The INA piston pin bearing is included with the crankshaft.
The shaft is available with a long stroke of 60mm (long stroke) and with a 57mm stroke
(standard). With the long stroke version, you get a larger displacement, while at the same time the cylinder control angles (overflow and exhaust ports) can be modified to increase performance. GEAR ANGLE Compared to many other racing shafts, the bgm PRO Touring shaft has a much better intake layout. For
tuning cylinders, the standard wave, with its very short intake time, cannot keep up with the standard wave. The bgm PRO shaft, on the other hand, closes on a PX engine
Titel Oil 0.25 lt - Solvent-based rust-blocking oil, ideal for the conservative restoration of vintage cars and motorcycles.
All models
It does not remove rust but blocks it, forming a transparent wet-look film that prevents its proliferation.
Can be overpainted. Apply two coats at intervals of 24-48 hours in thin layers.
It may create a slightly yellowing effect on white paints, which is why it is useful to perform a test to verify the stability of the original color.
Vespa 50 PK N/HP
Vespa 125/150/200 PX (no disc brake)
Length: 1500mm
Compatible with digital odometers
Maximum air calibrator/air brake SI DELL'ORTO 185 for SI 20.15-17 A-D/20.20-26.26E/H/27.23
Vespa 80/125/150/200
For carburetors type SI
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 200 PX VSX1T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
kit composed of 4 cork discs, 3 metal discs, and 7 springs
Starter lever tie rod kit with mounting bracket for Vespa 50-Special-Primavera ET3-Vespa 125/150/180/200 Sprint V-PX-TS-GT-GTR-Rally
All models
All models/All Models
Manual pump - manual fuel pump (canister pump) -HÜNERSDORFF- with transparent hose (1450mm) shut-off valve for engine testing
All models
Manual pump - manual fuel pump (canister pump) with PVC hose (1450 mm) and stopcock for decanting and suction of various fluids
consists of suction pump (LD-PE), stopcock (HD-PE) and flexible hose (PVC)
resistant to food, acids, chemicals, and gasoline
Length = 1,450 mm
Discharge rate 4 L/min
Adjustable shoulder strap with sliding buckle
Measurements: 25x21x7 cm
Vespa 50/90/125/150/180/200
Front Bitubo gas-pressurized shock absorber (Nitrogen) with separate compensation reservoir for Vespa P80-150X/P200E/PX80-200E/Lusso/T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Front Shock Absorber
ADJUSTMENT
The continuously adjustable millimetric ring for spring preload and the knob with clicks (12 clicks) for Compression damping adjustment allow you to customize the suspension setting according to your needs and driving preferences.
Shield and footboard in fiberglass for Vespa 125/150/200 PX-PE VNX1T-VNX2T-VLX1T-VSX1T
Vespa 80 PX
Vespa 125 PX VNX1>T
Vespa 150 PX VLX1T
Vespa 200 PE VSX1T
Total length: 120mm
a=90 mm
Ø 92 mm
steel sheet, enameled
green/white/red
a=80 mm
Ø 80 mm
steel sheet, enameled
blue/white/red
l=400.0mm
a=400.0mm
round
l=600 mm
l=400 mm
metal
green/white/red
l=200 mm
l=300 mm
metal
brown
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
UNISEX
black/grey
80% cotton, 17% polyamide, 3% elastane
All models
l=700 mm
l=500 mm
100% cotton
All models
l=700 mm
l=500 mm
100% cotton
All models
l=700 mm
l=500 mm
100% cotton
All models
l=500 mm
l=700 mm
100% cotton
turquoise
To celebrate the 75th anniversary of Vespa, LEGO designers have
worked closely with the engineers of the lifestyle brand to
provide adults with an engaging building project that faithfully recreates
the scooter and creates a spectacular model.
Exhaust connection to the cylinder (Ref. Orig. 130143) for Vespa 200 PE VSX1T-Rally
Vespa 200 PE VSX1T
SIP clutch/brake sport lever set left and right for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
aluminum
polished
pointed, adaptable
2 pieces
SIP sport clutch/brake lever set left and right for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
SIP clutch/brake sports lever set left and right for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50/90/125/150/160/180/200
with lever (l=200mm)
with reserve
Chrome Tubular Shield Edge for Vespa 80/125/150/200 PX-PE-Arcobaleno
Vespa 80/125/150/200 PX
Note: Accessory, Screw mounting
Adjustable shoulder strap with sliding buckle
Size: 25x21x7 cm
Vespa PX 80 V8X1T (Abroad), Vespa 80 PX VBX, Vespa 125 PX VNX1T, Vespa 125 PX VNX2T > 1115, Vespa 150 PX E VLX1T > 346430, Vespa 200 PX E VSX1T > 112624
Diameter: 18 mm
100% Made in Italy
Compatible with our item: 04-FO-012-FC
Vespa 50/125 PK S/XL
Vespa 80/125/150/200 PX
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180/200 Rally
Width: 72.5 cm
Height: 50 cm
Notes: Brackets and assembly instructions included
Carburetors SHB/PHVA/PHVB
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX PE (All)
Single-seater, ABS base without lock
100% MADE IN ITALY
Complete black sport seat for Vespa 80/125/150/200 VNB-VBB-VBA-Super-Sprint-GT-GTR-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX PE
New Sport saddle by NISA Selle, created in collaboration with PLC racing, expresses sportiness with well-defined lines and an appealing shape!!