Spare parts and accessories for Vespa 98 V.98
UNILLI whitewall tire for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966
White Band Size: 3.50/8 Notes: 4 layers
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5 etc.) 6 and 12-volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12-volt power source (e.g. a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug cable (without direct contact
with the wire)
Carburetor cover "AT design prototypes" KEIHIN -Polini-Dell'Orto
For carburetor:
Keihin PWK 28
Polini PWK 24-26-28-30
Dell'Orto PHBL
Stage 6 PWK 24-26-28
Voca PWK 24-28
Carburetor cover adjustable horizontally and vertically (to avoid abnormal tension on the throttle cable)
All models /All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
All models / Tutti i modelli
Vespa 50/90/125/160/180/200
Piaggio Emblem Genoa Enamel NOS Vespa 125 V1>15T/V30>33T/VM/VL/GS
Vespa 98
Vespa 125 V1T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 150 VL1>2T
Vespa 150 GS VS1T> 007664
Snap-fit with 4 clips
Warehouse stock
Black color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Dark green color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- Moto certified EN 13594:2015-CE
All models / Tutti i modelli
For windshield models with predisposition for cover mounting
Hole diameter: 30cm
Cloth size: 71x44.5 cm
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
Front luggage rack "ULMA" rust type for Vespa Largeframe Rally, Sprint, SS180, GS160, GT, GTR, GL, Super, VBB, VBA, VNA, VNB, GS150, VL, VB, VM, VN, V1-15, V30-33
Vespa Largeframe Rally, Sprint, SS180, GS160, GT, GTR, GL, Super, VBB, VBA, VNA, VNB, GS150, VL, VB, VM, VN, V1-15, V30-33
Not treated with anti-rust.
Note: For models with a top case and windshield
carburetor PHB/VHST
4-hole model โ 1mm
Goodride whitewall tire 3.50/8 42J for Vespa 98/125 VM/VN/VL/VB1/VNB/VNA/VBB/Super
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966
White Band Size: 3.50/8
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Measurements: 20x42x9 mm ( Gear shaft )
lamp
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor and coordination skills.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
1 Internal compartment
1 External pocket
Size: 21x25x4 cm
Metal magnet, with Vespa communication graphics.
2.2x2.2cm/ 4.5x2.2cm
M14x1.25, wrench width 20.8mm
shielded/long thread
equivalent to BOSCH W4CS/ DENSO IW24/W24ESG-U/W24ESRZ-U
With mesh inserts, touch screen compatible
Liquid silicone gasket, resistant to glycol. Ideal for flexible flanges. Machined surfaces, metal or plastics. โข The product withstands water and glycol mixtures. โข Excellent for components with high torque capacity. โข Enhanced formula with oil resistance and excellent adhesion. โข 8 times more flexible than cork and/or composite gaskets and 3 times more resistant to oils than conventional silicone gaskets. โข Operating temperature: -54ยฐC to 260ยฐC โข Non-corrosive to sensors present in the engine (such as Lambda and others). โข Low odor. Dries in 40 minutes.
Adjustable shoulder strap with sliding buckle
Size: 25x21x7 cm
O-ring and various dismantling tip tool kit for all models
All Vespa models
Different inclinations
Medium strength threadlocker "LOCTITE 243" locks nuts, screws, bolts, studs (10ml)
All models
Outdoor scooter-vespa cover, breathable and waterproof fabric in white color
all models
Made with the most compact and lightweight shell in the category, among its
main features are the removable neck roll with zipper
and the rear goggle strap holder for storing helmet goggles.
The 104 is produced without a visor or peak, its compact size allows
easy storage in all scooter under-seat compartments.
Triple compartment
Padded shoulder straps
Dimensions: 40x30x16 cm
Originally, authorized workshops proudly displayed an enamel sign with the 'Vespa Servizio' logo.
The same sign is now being reintroduced to be hung: metal shell, printed graphics, and LED light.
Dimensions: diameter 14cm Power: 12VPlug: EU AC/DC adapterAccessories: 1200 mm cable,
Black plastic license plate frame 170x170 mm for models up to 1999
All models registered up to December 1998
In Plastic
Dimensions: 170X170 mm
Vespa 98 V.98
Vespa 125 V1T-V15T
Vespa 125 V30T-V33T
Vespa 125 U VU1T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1T
For carburetors--> TA 17A/B, TA 18C/D/E
Vespa Poster 70x100