Spare Parts Vespa 50 Sprinter V5SS2T
An exclusive selection of spare parts for Vespa 50 Sprinter (chassis V5SS2T), the rare "fast" version produced in the '70s for the foreign market. Here you will find the hard-to-find components for this collector's model: from the iconic "Sprinter" adhesive stripes for the shield and sides, to the specific thermal group that made it faster than the standard 50. Rely on our catalog for a faithful restoration of this piece of Vespa history.
1 mm base gasket for thermal group for Vespa 50/90/125 Special-N/L/R-Primavera ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
Mirror support bracket on the handlebar in galvanized metal (LH)
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Including hardware
Vespa 50/90/125/160/180/200
All models / All models
Diameter: 1.6 mm
Length: 2000 mm
Barrel: 6x7 mm
For PWK/PHBL/VHST carburetors
Black color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Dark green color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- Moto certified EN 13594:2015-CE
All models / Tutti i modelli
For windshield models with predisposition for cover mounting
Hole diameter: 30cm
Cloth size: 71x44.5 cm
Deestone Tire 3.00-10 D813 4PR TT for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
3.00/10
Black
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Galvanized
High-quality engine compartment door for Vespa 50/90/125 Primavera ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Note--> without lever
Sheet thickness greater than art. 04-CZ-001-CI
Vespa 50/90/125/150/200
Internal diameter SX: 21mm
Internal diameter DX: 23mm
Includes lever guards
Cuppini side stand with chrome stem for Vespa 50/90/125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Chromed with non-slip foot
Accelerator Pulley for Vespa 50/N/L/R/S/SR/90/R/125/PV/GT/GTR/Super/150 GL/Sprint/Veloce/Super/180 Rally/SS/200 Rally
Vespa 50 S V5SA1T > 67570
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T > 881915
Vespa 50 Sprinter V5SS2T
Vespa 90 V9A1T >122983
Vespa 90 Racer V9SS2T
Vespa 125 GT VNL1T>VNL2T (CH) (F)
Vespa 125 GT VNL1T>VNL2T 30001>
Vespa 125 GT R VNL2T
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Super VNC1T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1
In galvanized steel
Vespa 50/90/125/150/180/200
Rearview mirror for classic motorcycles, high quality
Aluminum shell
Package: Left
Color: Chrome
Dimensions: Length 240 mm; height 250 mm
Barrel attachment M8 right and 10 x 1.25 right
Rearview mirror in black plastic (LH/RH) for Vespa 50/90/125/150/180/200
Vespa 50/90/125/150/180/200
Universal Reclining
You can mount this rearview mirror on either the right or left side, facing up or down.
Sold individually Package: Left / Right
Color: black
Adjustable rod Length from 0 to 100 mm.
Included Kit: M8-M8 left; 10×1.25; 10 x 1.25 left
All models
The ignition timing is important for the thermal health of the
engine and for delivering full power. If you rebuild the
engine, you should not rely on existing marks for ignition
adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source is always required (e.g. a car battery) if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of the fixed markers even at speeds above 8000 rpm in the near field.
The gun is connected to a 12-volt battery via the crocodile clips and the inductive clip on the spark plug wire (without direct contact with the wire)
Note: For models with a top case and windshield
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Diameter: 56 mm
Mounted with flush piston, lower edge, 128 main transfers, 178
exhaust, to have more power over 10000 raise the exhaust by 2mm,
with VMC exhaust pipe.
carburetor PHB/VHST
4-hole model ⌀ 1mm
Light switch for Vespa 90/125/150/180 Primavera-GT-GTR-VNB-VBB-Sprint-S Veloce-Rally with electronic ignition
Vespa 50 V5A1T N/L/R
Vespa 90 V9A1T
Vespa 90 V9SS1>2T
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 125 GT VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA1T>2T
Vespa 150 VBB1>2T
Vespa 150 VBA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 SS VSCT (without battery)
Vespa 180 Rally VSD1T
Switch modified for mounting electronic ignitions.
Model WITHOUT button for setting Sip odometer
lamp
Vespa 50 V5A1T N,L,R (clutch side)
Vespa 50 Special V5A2>3T (clutch side)
Vespa 50 Special V5B1>4T (clutch side)
Vespa 90 V9A1T (clutch side)
Vespa 125 Primavera VMA1T>2T (clutch side)
Vespa 125 Primavera ET3 VMB1T (clutch side)
Vespa PK (clutch side)
Vespa 150 GS VS1T>5T (clutch and flywheel side)
Vespa 180 SS VSC1T (flywheel side)
Dimensions: 3x9.3mm
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
By clicking on purchase, all available sizes will be displayed
Thickness--> 1.5 mm
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor and coordination skills.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
1 Internal compartment
1 External pocket
Size: 21x25x4 cm
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK S/XL/N
Primary transmission pair suitable for a 75cc - 90cc thermal group, without shock absorber.
Complete gear preselector with single o-ring for Vespa 50 N/L/R-Special-90 V9A1T-125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera VMA1T>2T
Metal magnet, with Vespa communication graphics.
2.2x2.2cm/ 4.5x2.2cm
M14x1.25, wrench width 20.8mm
shielded/long thread
equivalent to BOSCH W4CS/ DENSO IW24/W24ESG-U/W24ESRZ-U
With mesh inserts, touch screen compatible
Liquid silicone gasket, resistant to glycol. Ideal for flexible flanges. Machined surfaces, metal or plastics. • The product withstands water and glycol mixtures. • Excellent for components with high torque capacity. • Enhanced formula with oil resistance and excellent adhesion. • 8 times more flexible than cork and/or composite gaskets and 3 times more resistant to oils than conventional silicone gaskets. • Operating temperature: -54°C to 260°C • Non-corrosive to sensors present in the engine (such as Lambda and others). • Low odor. Dries in 40 minutes.
Vespa 50/80/90/125/150/160/180/200
DUNLOP TT93 GP 50J 90/90/10 Tire for Vespa 50/90/125 N-L-R-Special-Primavera-ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
Load index: 50J
Notes: Tubeless